MINISO 23BV07 Wireless Headset User Manual

User Manual

23BV07 Wireless Headset

MODEL: 23BV07

PLEASE READ THIS MANUAL CAREFULLY BEFORE USING THE PRODUCT AND KEEP IT PROPERLY

Product Parts

1. Mode
2. Volume-/Previous
3. Play/Pause
4. Power
5. Volume+/Next
6. TF Card Slot
7.  LED Indicator Light
8. Charging Port
9. Audio Port

Product Parameters

Bluetooth: V5.3
Frequency Response: 20Hz-20KHz
Pairing Name: MINISO#23BV07
Sensitivity: 98£3dB
Function: Multimedia, phone calling
Charging Port: Type-C
Charging Input: 5V=150mA
Transmission Distance: <10m
Battery Capacity: 200mAh
Charging Time: $3H
Music Playback Time: <10.5H
Calling Time: <7.5H
Impedance: 320

Function

red and blue lights blink alternately
Bluetooth| Open the Bluetooth of the device and search for MINISO-23BV07 then connect
Low Battery Alarm| When the battery is lower than 3.3V (20%), a voice prompt will be played every 60 seconds, red light blinks once every 5 seconds
Previous Track| Long press volume- button
Next Track| Long press volume+ button
Volume-| Short press volume- button
Volume+| Short press volume+ button
Play/Pause| Press play/pause button to play/pause the music, blue light turns off
Answer Call| Press play/pause button, blue light blinks
End Call| Press play/pause button, blue light blinks
Reject Call| Long press play/pause button for 2 seconds, blue light blinks
Call Back| Double press play/pause button, blue light blinks
Automatic Turning Off| If the earphones are not in use for 5 minutes after turning on or Bluetooth disconnection, the earphones turn off automatically and the light turns off
Line in| Supports Line IN music when turned off, plug 3.5mm jack and the earphones will turn off automatically
TF Card| Turn on and insert TF card, the music will be played automatically

Cautions

1. Reasonable control of the volume and time of usage is required to avoid  hearing damage.
2. For your safety, do not use it in potentially hazardous condition.
3. Do not listen to music, call up or answer the phone while driving to avoid danger caused by distraction.
4. Keep it out of reach of children to avoid danger caused by improper use.
5. Do not throw to avoid damage caused by dropping.
6. Do not store or use it under -20°C or above 45°C to avoid shortening the lifespan of earphones and battery.
7. Do not modify, disassemble or repair the product.
8. Irreplaceable battery. It should be disposed of according to local rules & regulations or be recycled by professional institute. Do not throw away or toss into fire.
9. When not in use for a long time, charge the earphones once every 3 months to extend its lifespan.
10. Avoid contact with water and other liquids to prevent them from penetrating into the product.

Troubleshooting

1. Fail to pair the wireless earphones with your cellphone.
   Solution: Check if the earphones are in pairing mode, and whether the phone BT function is on. Check the list on your phone, remove the earphones from the list, follow the instructions of user manual to pair the earphones with your phone again.

2. Cannot turn on the wireless earphones.
   Solution: Check the battery to see if it is low.

3. Can the battery of the wireless earphones be replaced?
   Answer: No. The lithium polymer battery in the earphones is irreplaceable.

4. The wireless earphones got disconnected with the phone within 10 meters.
   Solution: BT is wireless so that it is very sensitive to objects between the earphones and the connected device. Check if there are any metal or other objects that may affect the connection within the effective distance.

5. Cannot hear audio playing when the earphones are connected to the computer or phone.
   Solution: Check whether the computer’s audio output is already connected to wireless device and whether the Bluetooth in the computer supports A2ZDP protocol. Make sure the volume is up on your phone or computer.

6. Can I operate the Apps of my phone through the earphones after connecting the wireless earphones to the phone?
   Answer: Some apps may not support being operated through the earphones due to their settings.

Accessories

Device1;
Charging Cable1;
User Manual*1

FCC Warning

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

MADE IN CHINA
www.miniso.com
FCC ID:2AKI8-23BV07

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>