HiFuture FutureTour Pro Bluetooth and Noise Canceling Headphone User Manual
- June 16, 2024
- HiFuture
Table of Contents
HiFuture FutureTour Pro Bluetooth and Noise Canceling Headphone
Product Information
- Specifications
- Bluetooth Version: 5.0
- Noise Canceling: Yes
- Microphone: Yes
- Audio Jack: 3.5mm
- Charging Port: USB Type C
- Unboxing
- When unboxing the FutureTour Pro Bluetooth & Noise Canceling Headphone, you will find the following components:
- FutureTour Pro Headphone
- 3.5mm Audio cable
- TYPE C charging cable
- Please refrain from using any damaged components. Contact your local authorized HiFuture distributor/customer service for assistance.
- Button Functions
- Button Operations
- Power ON: Press and hold the MFB (Multi-Function Button) for 3 seconds. The LED indicator will blink blue and red, and you will hear a voice prompt.
- Pairing: After powering on, the headphones will enter pairing mode. The LED indicator will blink blue and red.
- Connect to Device: Select the Headphone on your device to establish a connection. The LED indicator will stay blue when connected to HiFuture.
- Disconnect: If the headphones is out of range or disconnected from devices, the LED indicator will blink blue and red to indicate disconnection.
- Power OFF: Press the MFB for 2 seconds. The LED indicator will blink red twice.
- Auto OFF: After 5 minutes of Bluetooth disconnection and ANC (Active Noise Canceling) turned off, the headphones will automatically power off. The LED indicator will blink red twice and then turn off.
- Play/Pause: Press the MFB once when the headphone is powered on to play or pause music. The LED indicator will stay blue.
- Call/End a Call: Press the MFB once when the headphone is powered on to answer or end a call. The LED indicator will stay blue.
- Reject a Call: Long press the MFB for 1 second when the headphone is powered on to reject an incoming call. The LED indicator will stay blue.
- Redial Last Call: Press the MFB twice when the headphone is powered on to redial the last call. The LED indicator will stay blue.
- Activate iOS Siri or Android Assistant: Press the MFB three times when the headphone is powered on to activate Siri or Assistant on your device.
- Volume Setting
- Volume Up: Press the Volume+ button repeatedly to increase the volume. You will hear a voice prompt, and the blue light will turn on.
- Volume Down: Press the Volume- button repeatedly to decrease the volume. You will hear a voice prompt, and the blue light will turn on.
- Playback Functions
- Skip to Next Track: Long press the Volume+ button. The blue light will turn on.
- Go To Previous Track: Long press the Volume- button. The blue light will turn on.
- ANC ON/OFF
- ANC ON: Press the ANC (Active Noise Canceling) button once. The green light will turn on, indicating ANC is activated.
- ANC OFF: Press the ANC button once again. The green light will turn off, indicating ANC is deactivated.
- Bass Mode/Standard EQ Mode
- Bass Mode: Press the ANC button twice. The bass mode will be activated, and the green light will turn on.
- Standard EQ Mode: Press the ANC button twice after activating the bass mode. The standard EQ mode will be activated, and the green light will turn on.
- Battery Low
- If the battery voltage is lower than 3.2V, you will hear a voice prompt and the LED indicator will flash red once every 20 seconds as a warning.
- If the battery voltage is lower than 3.0V, the headphones will automatically power off to conserve battery.
- How to Connect to FutureTour Pro
- Step 1: Power on the headphones by holding the MFB button for 2 seconds. The LED indicator will blink blue and red.
- FAQ (Frequently Asked Questions)
- Is the FutureTour Pro headphone compatible with all smartphone brands?
- The FutureTour Pro headphones are not compatible with all smartphone brands. Please check your smartphone user manual for compatibility.
Unboxing
Please refrain from using any damaged components. Contact your local authorised HiFuture distributor/customer service.
Summary of Button Functions
- Microphone
- 3.5mm Audio Jack
- Volume – /Previous Track
- Volume + /Next Track
- MFB (ON/OFF/Play/Pause/Call)
- LED Indicator
- TYPE C Charging Port
- ANC LED Indicator
- ANC Button (Activate Voice Assistant)
Button Operations
(Multi-Function Button Instructions)
Line No.| Require Action| Status| Operations|
Voice Prompt| Indicator (LED)
---|---|---|---|---|---
1| Power ON| POWER OFF| Press and Hold the “MFB” Button For 3 Seconds| Power
ON| Blinking Blue & Red
2| Pairing| POWER ON| After Power ON| Pairing| Blinking Blue & Red
3| Connect To Device| POWER ON| Select The Headphone on Your Device| You are
Connected to HiFuture| Blue Always ON
4| Disconnect| PAIRED| Out of Range or Disconnected From Devices| You are
Disconnected to HiFuture| Blinking Blue & Red
5| Power OFF| /| Press “MFB” for 2 SEC.| Power OFF| Red Blinks 2 Times
6| Auto OFF*| /| After 5mins Bluetooth Disconnected & ANC OFF| /| Red Blinks 2
Times and OFF
7| Play/Pause| POWER ON| Press the MFB Button Once| /| Blue Lights ON
8| Call/End a Call| POWER ON| Press the MFB Button Once| /| Blue Lights ON
9| Reject a Call| POWER ON| Long Press MFB Button 1s| /| Blue Lights ON
10| Redial Last Call| POWER ON| Press the MFB Button Twice| /| Blue Lights ON
11| Activate iOS Siri or Android Assistant| POWER ON| Press the MFB Button 3
Times| /| Blue Lights ON
- The headphones will be Powered OFF while charging and connecting with a 3.5mm audio jack.
- Ignore the FutureTour Pro from your device(s) after resetting the headphone.
- With both BT(BT ON & Connected) & ANC ON, Cyan is always ON.
Vol./Music/Phone Call/ ANC Operations
Require Action| Status| Operations| Voice Prompt|
Indicator (LED)
---|---|---|---|---
Volume Setting
Volume Up| POWER ON| Press Volume+ Repeatly as desired| Voice“Bee”| Blue Light
ON
Volume Down| POWER ON| Press Volume- Repeatly as desired| Voice“Bee”| Blue
Light ON
Playback Functions
Skip to the Next Track| POWER ON| Long Press Volume +| /| Blue Light ON
Go To the Previous Track| POWER ON| Long Press Volum –| /| Blue Light ON
Reset| POWER ON| Press “Volume + & Volume -” Together For 3 Seconds| Pairing|
Blinking Blue and Red
ANC ON/OFF
ANC ON| POWER ON| Press ANC Once| ANC ON| Green Light ON
ANC OFF| POWER ON| Press ANC Once| ANC OFF| Green Light ON
Bass Mode| POWER ON| Press ANC Bottom Twice| Bass Mode ON| Green Light ON
Standard EQ Mode| POWER ON| Press ANC Bottom Twice after Bass Mode| Standard
Mode ON| Green Light ON
Battery Lower
Lower Battery Warming| Power ON/Call/Music| Battery Voltage Lower Than 3.2V|
20 Seconds Remind Once” Battery Low”| The Red Light blinks 3 seconds once
Lower Battery OFF| Power ON/Call/Music| Battery Voltage Lower Than 3.0V
Automatically Power OFF| /| /
Charging| /| /| /| Red Lights ON
Fully Charged| /| /| /| Red Lights OFF
- Not compatible with all smartphone brands; please check your smartphone user manual.
How to connect
How to connect to FutureTour Pro
- Step 1. Power on the headphones by holding the “MFB” button for 2 seconds (Blinking Blue/Red indicator)
- Step 2. Hold the headphones next to the Bluetooth device (unlocked and with Bluetooth enabled)
- Step 3. Connect the headphones to your phone/other Bluetooth devices. Find and Select the “FutureTour Pro” on your phone/other Bluetooth devices.
Noise Cancelling
Noise cancelling feature designed specifically to block constant, low-
frequency noises, and is excellent for train, or bus travel. To enable the
noise cancelling feature, Press the button one second ANC ON, the indicator
will light up in Green. Although noise is reduced, it is not cancelled
completely
Charging the Battery
- The headphone is convenient to connect to an AC charger or a USB charger with a Type-C port.
- Make sure that your headphone is fully charged for at least 3.5 hours before initial use.
- Make sure to use the qualified charger (DC 5V@1A) to charge your headphones.
| Status | Battery Indicator |
|---|---|
| Low battery | The red indicator will flash 1 time every 3 sec. |
| Charging | The red indicator will light up. |
| Fully charged | The red indicator will light OFF |
Hints and Tips
Product not working:
- Recharge the product.
- Ensure the product is switched on.
- Ensure your Bluetooth-enabled device’s wireless function is active.
- Ensure there are no other wireless devices in discovery mode.
- Move the product closer to the device.
- Pair again the product and the device.
- When Bluetooth disconnected but ANC ON headset will not shut down.
FutureTour Pro
- Made by ShenZhen Future Access Technology Co., Limited
- www.hifuturegroup.com.
- Designed in the USA, Assembled in China
- Bluetooth & Noise Canceling Headphone
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>