HiFuture SonicBliss TWS Earbuds User Manual
- June 16, 2024
- HiFuture
Table of Contents
HiFuture SonicBliss TWS Earbuds
Specifications
- Brand: HiFuture
- Model : SonicBliss
- Wireless Technology: TWS (True Wireless Stereo)
- Built-in Microphone: Yes
- Charging Interface: TYPE C
Important Notes
Before using the SonicBliss wireless earbuds, please make sure to do the following:
- Charge both the case and earbuds
- If both earbuds don’t sync together, reset the earbuds
- If the earbuds don’t charge, clean the charging slot on the case and the contact surface on the earbuds
Tap Control
The SonicBliss TWS Earbuds can be controlled using taps on the earbuds.
Here are the different tap control actions:
| Action | Taps (Left Earbud) | Taps (Right Earbud) |
|---|---|---|
| Play/Pause | 1 | 1 |
| Previous/Next track | 2 | 2 |
| Volume down/up | 3 | 3 |
| Activate Siri/other voice control software | 5 | 5 |
| Answer/End a call | 1 | 1 |
| Reject a call | 2 | 2 |
| Factory Reset | Press and hold for 2 seconds |
IMPORTANT NOTES
- Before using the SonicBliss wireless earbuds, please charge both the case and earbuds.
- If both earbuds don’t sync together, please reset the earbuds.
- If the earbuds don’t charge, please clean the charging slot on the case and the contact surface on the earbuds.
POWER ON
POWER OFF
Note : When the charging case is at low battery or out of power, the earbuds will not automatically power on/off, please turn them on/off manually
WEARING
- Put the earbuds into your ears.
- Rotate the earplugs to adjust the comfortable Angl
CHARGING
Please fully charge the SonicBliss after unboxing. Use a Type-C cable to charge the charging case.
INDICATORS’ DESCRIPTIONS
- Earbuds
Power ON
|
Power OFF
|
Pairing
|
Connected
|
Battery Low
|
Fully Charged
---|---|---|---|---|---
LED flashes blue for 1S
|
LED flashes
red
|
LED flashes red and blue alternatively
|
LED OFF
|
LED
breathing red
every 3S
|
LED OFF
- Charging Case
Battery Low| Put earbuds into the case and close the case
---|---
The first LED flashes white
quickly
| White lights always ON,
and AUTO turn off after earbuds
fully charged
-
Reset Indicators
The red and blue lights flash 3 times at the same time and auto off -
Charging by external TYPE-C cable
Charging| Fully Charged
---|---
Indicator flashes White| Indicator always ON White
PACKAGE LIST
Please refrain from using any damaged components. Contact your local authorized HiFuture distributor/customer service.
Device Overview
- Tap area
- Built-in Microphone
- Earbuds indicator light
- Charging interface
- TYPE C Charging port
- Earbuds case indicator light
TAP CONTROL
CONNECT THE EARBUDS
- Power on the earbuds and turn on the Bluetooth in your phone.
- Tap “HiFuture SonicBliss” from the smartphone’s Bluetooth menu. There’s a voice prompt “You are Connected to HiFuture” after a successful connection with a smartphone, and the indicator will be off automatically
HOW TO RESET THE EARBUDS
If your earbuds stop syncing with each other, please follow the below steps to reset the earbuds：
- Make sure the SonicBliss is disconnected from a phone or other Bluetooth devices
- Put both earbuds into the charging case for 5 seconds until the indicator lights off and then take them out, QUICKLY TAP L or R earbud 5 times there will be a prompt sound “Reset Succeed”, which means the SonicBliss has been reset successfully
Hereby, SHENZHEN FUTURE ACCESS TECHNOLOGY CO., LIMITED declares that the radio
equipment type HiFuture earbuds. mentioned in this manual is in compliance
with Directive 2014/53/EU.
Manufacturer: SHENZHEN FUTURE ACCESS TECHNOLOGY CO., LIMITED
Address: B-206, Block B, Tsinghua Unis Inforport, Hi-Tech Park(North),
Nanshan District, Shenzhen, China.
EC REP:
- OST EU 20220713000004 eVatmaster Consulting GmbH
- Bettinastr. 30 60325 Frankfurt am Main, Germany contactdevatmaster.com
UK AR:
- HUA TENG LIMITED 3 Glass Street, Hanley,
- Stoke On Trent, ST1 2ET United Kingdom
FAQ
How do I reset the earbuds?
If your earbuds stop syncing with each other, please follow these steps to
reset the earbuds:
- Make sure the SonicBliss earbuds are disconnected from your phone or other Bluetooth devices.
- Perform a factory reset by pressing and holding both the left and right earbuds for 2 seconds.
QR SCAN
For more information, please visit:
www.hifuturegroup.com
For any assistance, email us:
info@hifuturegroup.com
Designed in the USA, Assembled in China
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>