bolero cecotec Combi 322 Refrigerator Instruction Manual

bolero cecotec Combi 322 Refrigerator

Product Information

Bolero Coolmarket Combi 322

Bolero Coolmarket Combi 322 is a refrigerator and freezer combination appliance available in various colors such as white, inox, dark, glass white, and glass black. The appliance comes with safety instructions, parts and components, installation instructions, operation instructions, food storage instructions, cleaning and maintenance instructions, troubleshooting instructions, technical specifications, disposal instructions, and warranty information.

Product Usage Instructions

Bolero Coolmarket Combi 322

1. Before using the appliance, read the safety instructions carefully and keep the manual for future reference.
2. Make sure that all persons using the appliance are aware of the safety instructions.
3. Do not place food directly against the air outlet inside the appliance.
4. Follow the installation instructions carefully to ensure proper functioning of the appliance.
5. Refer to the operation instructions to learn how to use the appliance efficiently.
6. Follow the food storage instructions to ensure that your food stays fresh and safe to eat.
7. Regularly clean and maintain the appliance as per the instructions provided to ensure its longevity.
8. If you face any issues with the appliance, refer to the troubleshooting instructions.
9. Dispose of the old electrical and electronic appliances as per the disposal instructions provided.
10. If you require technical support or have any warranty-related queries, refer to the technical support and warranty information provided.

SAFETY INSTRUCTIONS

Read the instructions carefully before using the appliance for the first time and keep this instruction manual for future reference or new users.

• It is important to make sure all users are familiar with the operation and safety features of the appliance to prevent faults and unnecessary accidents.
• Make sure that the mains voltage in your house matches the voltage stated on the rating label of the product.
• This appliance can be used by children aged 8 and above, and persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge, as long as they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Children must not play with the appliance. The cleaning and maintenance of the appliance should not be carried out by children without supervision.
• Keep the packaging material away from children, as there is a risk of suffocation.
• WARNING: if the interior light is damaged, contact the official Cecotec Technical Support Service. Do not try to repair it on your own.
• WARNING: when positioning the appliance, make sure the power cord is not trapped or damaged. A crushed or damaged connector may heat up and cause a fire.
• WARNING: keep the ventilation grilles on the appliance enclosure unobstructed.
• Make sure you can access the plug of the appliance after installation.
• Do not place food directly against the air outlet on the interior of the appliance.
• Keep the ventilation openings clear from obstructions.
• Do not place carbonated or fizzy drinks in the freezer compartment, as this creates pressure in the container and could explode and damage the appliance.
• WARNING: do not use mechanical devices or other means to accelerate the defrosting process other than those recommended by Cecotec.
• WARNING: do not damage the refrigeration circuit.
• If the cord is damaged, it must be replaced by the manufacturer, the supplier, or qualified personnel in order to avoid a hazard.
• WARNING: do not use electrical appliances inside the refrigerator.
• We recommend you check the power cord regularly to detect any sign of possible damage. Do not use the appliance if the cord is damaged.
• To avoid injuries or death caused by electric shock, do not use the appliance with your hands wet or over a wet surface.
• You should never use this refrigerator with an extension cord or a multi-socket adaptor. Make sure the appliance is plugged in directly to a power supply.
• When installing the appliance, make sure that there is free space in the rear part, as this is the main heat outlet. This will allow for adequate ventilation.
• Do not place hot food or drinks in the refrigerator, allow them to cool down to room temperature beforehand.
• Do not place any other appliance on the refrigerator and do not wet it.
• Do not store explosive substances such as aerosols or flammable propellants in this appliance.
• This appliance is designed for domestic use only and is not intended for bars, restaurants, farmhouses, hotels, motels, and offices.
• WARNING: to avoid any risk due to the instability of the refrigerator, you must install it according to the instructions.
• This appliance has a built-in earthed plug. Make sure the power supply in your house is properly grounded.
• Wait 5 minutes after a power failure before turning the appliance back on. Otherwise, the compressor may be damaged.
• This appliance is not intended to be operated by means of an external timer or separate remote-control system.
• Always handle the appliance carefully to avoid any damage on it.
• Frozen food can cause ice burns if it is consumed right after removing it from the freezer compartment.
• Do not remove or touch items in the freezer compartment with your hands wet, as it could cause skin abrasions or frost/freeze burns.
• Never use the base, drawers, or door as support.
• Do not overload the door shelves or place too much food on the drawers to prevent items from falling off and damaging the device.
• WARNING: do not attach multi-socket adaptors or multiple power supplies to the rear part of the appliance.
• To avoid food contamination, please respect the following instructions:
• Opening the door for a long period of time may cause a significant increase in temperature in the appliance compartments.
• Regularly clean the surfaces that come into contact with food and with the accessible draining systems.
• Clean the water tank if it has not been used for 48 hours.
• Store raw meat and fish in proper containers in the refrigerator, so they do not come into contact or leak on other food.
• The two-star compartments are suitable for storing pre-frozen food, storing, or making ice cream and making ice cubes.
• Compartments with one, two, or three stars are not suitable for freezing fresh food.
• Before carrying out any maintenance and cleaning task, turn off the appliance and unplug it.
• It is advisable to wait for at least four hours before connecting the appliance to allow oil to flow through the compressor.
• Air must flow around the appliance. Lack of air leads to overheating. To achieve good ventilation, follow the installation instructions.
• Whenever possible, the rear part of the appliance should not be too close to the wall to prevent it from touching or reaching the hot parts (the compressor and the condenser). To avoid risk of fire, follow the installation instructions.
• Make sure the power cord is accessible after installation.
• All electrical work required to maintain this appliance must be carried out by a qualified electrician.

Refrigerant

• Isobutane refrigerant (R600a), contained within the refrigeration circuit of the appliance, is a natural gas with a high level of environmental compatibility; however, it is flammable. Make sure that no components of the refrigeration circuit have been damaged during the transport and installation of the appliance.
• WARNING: the refrigerant and the insulator gas are flammable. When disposing of the appliance, only dispose of it at an authorised waste disposal facility. Do not expose it to flames.
• WARNING: the device contains refrigerant and gases in the insulation. The appliance and gases must be disposed of professionally, as they may cause injuries to eyes or ignition. Make sure the refrigeration-circuit pipe is not damaged before disposing of it correctly.
• WARNING: risk of fire. If the refrigeration circuit is damaged:
• Avoid open flames and sources of ignition.
• Completely air the room where the appliance is located.

PARTS AND COMPONENTS

Fig. 1

1. Refrigerator compartment shelves
2. Drawer cover
3. Crisper Box
4. Freezer compartment drawers
5. Adjustable feet
6. Door shelves

Model 02424_Bolero CoolMarket Combi 322 WD Inox D with water dispenser:(Fig. 1.1)

1. Refrigerator compartment shelves
2. Crisper box cover
3. Crisper box/Humidity box
4. Freezer compartment drawers
5. Adjustable feet
6. Door shelves
7. Water dispenser

Note:
The graphics in this manual are schematic representations and may not exactly match the product.

Note:
Model 02422 does not include a bottle shelf.

BEFORE USE

• This appliance is packaged in a way as to protect it during transport. Take the appliance out of its box and remove all packaging materials. You can keep the original box and other packaging elements in a safe place. This will help you prevent product damage when transporting it in the future. In case the original packaging is disposed of, make sure all packaging materials are recycled accordingly.
• Make sure all parts and components are included and in good conditions. If there is any piece missing or in bad conditions, contact the official Cecotec Technical Support Service immediately.

Levelling

• Make sure you level your refrigerator with the front levelling feet. If it is not levelled, the refrigerator performance will be affected, or it can even cause a malfunction.
• After installing the refrigerator, wait 4 hours before using it to allow the refrigerant to stabilise.

INSTALLATION

Place of installation Ventilation condition

• The location you choose for the installation of the refrigerator must be properly ventilated and away from heat sources. Do not place the refrigerator near heat sources, like a cooker or pot, and avoid direct sunlight to ensure the cooling effect and save on energy consumption. Do not place the refrigerator in a damp place, to avoid rust or loss of power. The result of dividing the total space of the room in which the refrigerator is installed by the amount of refrigerant load in the refrigerator must not be less than 8 g/m³.
• Note: The amount of refrigerant used by the refrigerator is specified on the rating plate.

Heat dissipation space
During operation, the refrigerator releases heat into the environment. Therefore, you should leave at least 30 mm of free space at the top, more than 100 mm on both sides, and more than 50 mm at the rear of the refrigerator. Fig. 2

Note: figure 2 only illustrates the space required for the product.

Stable surface
Place the refrigerator on a solid, flat surface (the floor) to keep it stable, otherwise vibrations and noises will occur. When the refrigerator is placed on a carpet, straw mat, polyvinyl chloride, solid support plates should be placed under the refrigerator to avoid colour change due to heat dissipation.

Preparing for use

• Waiting time
  Once the refrigerator is properly installed and cleaned, do not switch it on immediately. Be sure to wait at least one hour before switching it on to ensure normal operation.

• Cleaning
  Check the placement of the interior accessory parts and clean the inside with a soft cloth.

• On
  Connect the plug into a power socket to switch on the compressor. After one hour, open the freezer door: if the temperature inside the freezer compartment has clearly dropped, the cooling system is operating normally.

Food storage
After the refrigerator has been in operation for some time, the user may adjust its internal temperature. Once the refrigerator has reached a suitable interior temperature, put in the food. These will take 2 to 3 hours to cool down completely. In summer, when the temperature is high, it may take more than 4 hours for food to cool down completely (try to open the refrigerator door as rarely as possible).

If the refrigerator is installed in a wet place, be sure to check if the earthed cord and the leakage breaker are working normally. If vibration noises occur due to contact of the refrigerator with the wall or if the wall turns black due to air convection around the compressor, remove the refrigerator from the wall. The installation of the refrigerator may cause noise interference or image problems in mobile phones, landline phones, radio receivers, or televisions near the device, so in this case, keep the refrigerator as far away from these objects as possible.

Changing the opening direction of the door
If desired, you can change the direction in which the door opens, from the right side (by default) to the left side.

Warning

• The refrigerator must not be connected to the power socket when you change the opening direction of the door. Make sure to disconnect the plug from the power socket.
• Check figure 5 to check the tools you need.
• It is advisable to change the opening direction of the door between two people.

Fig. 5

A. Tools not supplied

1. 8-mm tube wrench

2. Flat-head screwdriver

3. Spatula

4. Crosshead screwdriver

5. Wrench

6. 8-mm wrench
   B. Additional parts (included in the plastic bag)

7. Upper-left hinge

8. Upper-left hinge cover

9. Right-hand screw gap cover

10. Middle-left hinge

11. Left unblocker *2

12. Left doorstop *2

13. Allen key (4 mm)

Fig. 7

1. Self-tapping screw

2. Upper-right hinge cover

3. Electrical connector

4. Door switch
   Fig. 8

5. Upper-left hinge cover
   Fig. 9

6. Screws

7. Upper-right hinge

8. Electrical connector
   Fig. 11

9. Right-hand screw gap cover

10. Left-hand screw gap cover
    Fig. 12

11. Upper-left side door cover

12. Left-hand door connector

13. Upper-right side door cover

14. Right-hand door connector
    Fig. 13

15. Right-hand upper door stop

16. Right-hand upper door dowel

17. Self-tapping screw

18. Left-hand upper door stop

19. Left-hand upper door dowel
    Fig. 15

20. Right-hand lower door stop

21. Right-hand lower door dowel

22. Self-tapping screw

23. Left-hand lower door stop

24. Left-hand lower door dowel
    Fig. 17

25. Lower hinge

26. Special flange screw

27. Adjustable lower legs
    Fig. 18

28. Lower hinge pin
    Fig. 21

29. Upper door’s upper-left hinge
    Fig. 22

30. Upper door connector

31. Refrigerator connector

32. Refrigerator connector
    Fig. 23

33. Self-tapping screw

34. Open the door, remove the door shelves (to prevent any damage) and then close the door. To remove the shelves, slightly press the shelf and move it upwards. Fig. 6

35. Unscrew the screw on the upper-right hinge (1), then remove the upper hinge cover (2). Carefully unplug the electrical connector (3) underneath. Fig. 7

36. Press the side of the door switch (4) and pull it upwards to separate it from the upper-right hinge cover (2). Insert the door switch (4) into the upper-left hinge cover (5) (included in the plastic bag). Keep the upper-right hinge cover (2). Fig. 8

37. Unplug connectors (A) and (B). Then unscrew the screws (6) with an 8 mm drill or a spanner and remove the upper-right hinge (7). Then fit the connectors (A) and (B) into the hole as shown in figure 9. After this process, the refrigerator door will be unstable. Be sure to hold it in place so as not to damage it. Fig. 9

38. Carefully lift the upper door to remove it from the middle hinge. Then place the upper door on a soft surface with the inside facing upwards. Fig. 10

39. Insert the right-hand screw gap cover (9) (included in the plastic bag) into the upper-right side where the upper-right hinge was located. Then, remove the left screw gap cover (10) from the upper-left side of the refrigerator and put it away. Fig. 11

40. Remove the upper-left side door cover (11) and remove the connector (12). Remove the upper-right side door cover (13) and place the connector (14) inside. Replace the upper side door covers (11 and 13) Fig. 12

41. On the upper door’s right side, unscrew the screw (15) and remove the dowel (16) from the door stop (17). On the upper door’s left side, insert the left door stop (18) and the left dowel (19) (included in the plastic bag) and secure it with the screw (15). Keep the right door stop and dowel. Fig. 13

42. Use the Allen key (included in the plastic bag) and a Phillips screwdriver to loosen the screws and remove the upper-right hinge from the lower door. Then carefully lift the door up and remove it. Then carefully lift the door up and remove it. Fig. 14

43. Place the lower door on a soft surface with the inside facing up. On the lower door’s right side, unscrew the screw (22) and remove the dowel (21) from the door stop (20). On the lower door’s left side, insert the left door stop (23) and the left dowel (19) (included in the plastic bag) and secure it with the screw (15). Keep the right door stop and dowel Fig. 15

44. Replace the screw gap covers and screw the centre plate to the right. Fig. 16

45. Tilt the refrigerator carefully to gain access to its base. Remove the two adjustable lower legs (27), then remove the lower hinge (25) by unscrewing the screws (26). Fig. 17

46. Loosen the lower hinge pin and remove it. Rotate the hinge and reinsert the lower hinge pin (28), then tighten it. Fig. 18

47. Place the lower hinge on the left side of the refrigerator base and secure it with the screws (26). Replace the adjustable lower legs and partially secure them. Fig. 19

48. Place the refrigerator in an upright position and carefully insert the lower door into the upper hinge of the lower door. At this point, the door will not be attached to the refrigerator. Hold it firmly so that it does not fall off. Install the left hinge (in the plastic bag) making sure that the lower door is secured in place. Fig. 20

49. Position the upper door on the left side and place the middle hinge shaft in the upper door’s bottom hole. Install the upper-left hinge (29) (included in the plastic bag) and screw it with the screws removed in step 9 (6). At this point, the door will not be attached to the refrigerator, but hold it firmly so that it does not fall off. Fig. 21

50. Remove connectors 31 and 32 from the top left side of the refrigerator. Connect 30 to 31. Then plug connector 32 to the door switch located on the upper-left hinge cover. Fig. 22

51. Install the upper left hinge cover (5) using the screw (33) as shown in figure 23, on the top of the refrigerator. Fig. 23

52. Open the upper door, reinstall the shelves, and close the door.

Please note

• If the refrigerator has a handle, you must reverse its position by following these instructions:
• Remove the covers from the handle screws and then loosen the screws. Pull the handle to remove it and replace it on the right side. Screw the screws back in and place the covers. Fig. 24

Fig. 24

1. Handle covers
2. Special screws
3. Door handle
4. Screw gap

OPERATION

The display panel is located on the refrigerator door, as shown in the figure below.

Fig. 3

1. Digital refrigerator-compartment temperature indicator
2. Digital freezer-compartment temperature indicator
3. Fast Cool icon
4. Fast Freeze icon
5. Smart icon (ECO mode)
6. Holiday icon
7. Refrigerator button
8. Freezer button
9. Function button
10. OK Confirm button
    • When connecting the refrigerator to the mains for the first time, all icons on the display light up for 2 seconds.
    • When all doors are closed, the display will automatically switch off if no button is pressed within 3 minutes (approx.).
    • If the display is off, it will light up upon opening a door or pressing a button.

The following functions can be performed when keys are unlocked and light up on the display.

Temperature setting

1. Setting the refrigerator compartment temperature

   • Press the Refrigerator button for the refrigerator temperature digits to start flashing and press it again to set the temperature, then press OK to confirm the temperature setting.

   • The refrigerator temperature setting functions are as follows:
     5 ºC →6 ºC →7 ºC →8 ºC →OFF→2 ºC →3 ºC →4 ºC →5 ºC ；

   • OFF refers to switching off the refrigerator. When this function is activated, the refrigerator will stop cooling.

2. Setting the freezer compartment temperature

   • Press the Freezer button until the freezer temperature digits start flashing. Press it again to set the temperature and finally press OK to confirm the temperature setting.
   • The freezing temperature setting cycles are as follows:
   • 18 ºC →-17 ºC →-16 ºC →-24 ºC →-23 ºC →-22 ºC →-21 ºC →-20 ºC →-19 ºC →-18 ºC

Smart function (ECO mode)
When you activate the Smart function, the temperature in the refrigerator compartment will be set to 4°C and the temperature in the freezer compartment will be set to -18°C, so that food will be preserved in the best possible conditions and the refrigerator will operate as efficiently as possible.
With the Smart function active, you cannot modify the temperature of any compartment.

1. Activation of the Smart function
2. Press the Function button until the corresponding icon starts flashing, then press the OK Confirm button within the next 5 seconds to confirm your choice. If you do not press the OK Confirm button within the next 5 seconds, the function will not be activated.
3. Deactivation of the Smart function
4. With the Smart function activated, press the Function button until the Smart icon (ECO mode) starts flashing, then press the OK Confirm button for 5 seconds to confirm your choice. The Smart function will be deactivated.
5. If you activate the Holiday, Fast Freeze or Fast Cool function, the Smart function is automatically deactivated.

Fast Cool
When this function is activated, the refrigerator temperature is automatically set to 2°C, lowering the temperature quickly to preserve the freshness and nutritional properties of food.

If the Fast Cool function is activated, the temperature of the refrigerator compartment cannot be adjusted.

1. Activating the Fast Cool function
   • Press the Function button until the corresponding icon starts flashing, then press the OK Confirm button within the next 5 seconds to confirm your choice. If you do not press the OK Confirm button within the next 5 seconds, the function will not be activated.
2. Deactivating the Fast Cool function
   • With the Fast Cool function active, press the Function button until the Fast Cool icon starts flashing, then press the OK Confirm button for 5 seconds to confirm your choice. The Smart function will be deactivated.
   • If you activate the Holiday, or Smart (ECO mode) function, the Fast Cool function deactivates automatically.

Fast freeze
When you activate the Fast Freeze function, the temperature in the freezer compartment will drop to -32°C automatically and will deactivate after 26 hours of operation. The Fast Freeze function is used to prevent loss of nutritional quality and to preserve food freshness.

If the Fast Freeze function is activated, the freezer compartment temperature cannot be adjusted.

1. Activating the Fast Freeze function
2. Press the Function button until the corresponding icon starts flashing, then press the OK Confirm button within the next 5 seconds to confirm your choice. If you do not press the OK Confirm button within the next 5 seconds, the function will not be activated.
3. Deactivating the Fast Freeze function
   • After 26 hours of operation, the Fast Freeze function will deactivate automatically.
   • With the Fast Freeze function active, press the “Function” button until the Fast Freeze icon starts flashing, then press the OK Confirm button to confirm and deactivate the Fast Freeze function.
   • If you activate the Smart function, the Fast Freeze function deactivates automatically.

Holiday
When you activate the Holiday function, the temperature in the refrigerator compartment is set to 14°C.
When you are away for an extended period of time, you can activate the Holiday function to keep the refrigerator compartment running on low energy consumption, while preventing undesirable odours and ensuring a correct operation of the freezer compartment.

Make sure you remove all the food from the refrigerator compartment before activating this function.
If the Holiday function is active, the temperature of the refrigerator compartment cannot be adjusted.

1. Activating the Holiday function

2. Press the Function button until the corresponding icon starts flashing, then press the OK
   Confirm button within the next 5 seconds to confirm your choice. If you do not press the OK
   Confirm button within the next 5 seconds, the function will not be activated.

3. Deactivating the Holiday function

4. With the Holiday function activated, press the Function button until the Holiday icon starts flashing, then press the OK button within 5 seconds to confirm your choice. The Holiday function will deactivate.

5. If you activate the Smart or Fast Cool function, the Holiday function deactivates automatically.

Function memory after a power failure
In the event of a power failure, the refrigerator will save the functions set before the power failure and will activate them when the power is restored.

Delayed start after power failure
To prevent damage to the refrigerator compressor in the event of a short power failure (i.e., less than 5 minutes), the compressor will not start immediately after switching on.

Overheating warning (only after a power failure)
When the refrigerator cooling system is on, if the freezer compartment temperature is above -10°C, the freezer compartment temperature digits will flash on the display. The display will show the temperature of the freezer compartment when you press any button, and it will return to its usual state when you press any button again or after 10 seconds.

Open door alarm
If the door stays open for more than 3 minutes, the refrigerator will emit an alarm sound, which can be shut off by pressing any key, but will sound again if the door is still open 3 minutes later. The alarm sound will not stop until the door is closed.

Fault alarm
If the display shows E0, E1, E2, EH, or EC, it means there’s a fault in the refrigerator. Contact the Technical Support Service of Cecotec.

Adjusting the refrigerator air (humidity) regulator
The cold air entering the fresh-food storage compartment will gradually increase as the air regulator is adjusted from the MIN. to the MAX. position.
Fig. 4

INSTRUCTIONS ON FOOD STORAGE

Use precautions

• The refrigerator may not operate consistently (there may be some defrosting of the contents, or the temperature may become too hot in the freezer compartment) if placed in locations with a temperature out of the temperature range for which they are designed for a long period of time.
• The internal temperature may be affected by factors such as the location of the refrigerator, room temperature, and door opening frequency, etc., and you should take these factors into account if you decide to use any temperature-control devices.
• Effervescent or carbonated drinks should not be stored in the freezer compartment or drawer of the refrigerator.

Food location

• Due to the circulation of cold air in the refrigerator, the temperature in each zone is different, so food must be placed in different zones.
• The refrigerator compartment is suitable to store food that does not need to be frozen, cooked food, beer, eggs, some seasonings that need to be kept cold, milk, fruit juice, etc. The crisper drawer is the best place to store fruit and vegetables.
• The freezer compartment is suitable to store ice cream, frozen foods, and foods that need to be kept for a long time.

Using the refrigerator compartment (Crisper Box/Humidity Box)

• Shelves: To remove the shelves, first lift them up and then pull them out; to put them back, put them into their position before lowering them. (For the two-section shelf, push the first section towards the rear end and pull the second section out). Keep the rear edge of the shelf facing upwards, to prevent food from coming into contact with the wall. When removing and fitting shelves, hold them firmly and handle them carefully to avoid damage.
• Crisper drawer: Pull out the crisper drawer to access the food. After using or cleaning the bottom shelf of the refrigerator (the drawer cover), put it back in place so that the internal temperature of the drawer is not affected.

Humidity control of the drawer

• The humidity regulator of the drawer is designed to preserve the humidity and freshness of the vegetables.
• If you slide the humidity regulator to the right, more gaps will be exposed, and the drawer will have a lower humidity level.
• If you slide the humidity regulator to the left, less gaps will be exposed, and the drawer will have a higher humidity level.

Using the ice cube tray
Place the ice cube tray in the upper part of the freezer compartment so that it freezes as quickly as possible.

Care for food storage

• Clean and dry food completely before storing it in the refrigerator. Before introducing food in the refrigerator, it is advisable to seal it to prevent water evaporation and thus keep fruit and vegetables fresh on the one hand, and to prevent odours on the other.
• Leave enough space between the food; if they are too close together, they will block the flow of cold air, which will affect the cooling effect. Do not store too much or too heavy food to prevent the shelves from bending. When storing food, leave a distance from the interior wall; do not place water-rich food too close to the inner wall of the refrigerator to prevent it from freezing on the interior wall.
• Food storage by category: place daily food items at the front of the shelf so that you can reduce the door opening time and avoid food spoilage due to shelf life.
• Energy saving tips: let hot food cool down to room temperature before introducing it in the refrigerator. Place frozen food in the refrigerator compartment to defrost it.

Storage of fruits and vegetables
Please note that some types of fresh vegetables and fruits are sensitive to cold and therefore not suitable for storage in the refrigerator crisper drawer.

Use of the freezer compartment

• The temperature of the freezer compartment is kept at -18ºC, so it is advisable to store food that you wish to keep for a long period of time in the freezer compartment, always respecting the storage time indicated on the food packaging.
• The freezer-compartment drawers are suitable to store food which needs to be frozen. Large fish and meat should be cut into small pieces and placed in freezer bags before placing them in the freezer-compartment drawers.
• Let hot food cool down to room temperature before introducing it in the freezer compartment.
• Do not place a glass container with liquid or sealed canned liquid in the freezer compartment to prevent them from exploding due to volume expansion after freezing the liquid.
• Divide food into small portions.
• Food should be packed or covered with suitable materials that are firm, tasteless, impermeable to air and water, non-toxic, and non-polluting to avoid cross-contamination and odour transfer.

Tips on the water dispenser (only for model 02424_Bolero CoolMarket Combi 322 WD Inox D)
The refrigerator model 02424_Bolero CoolMarket Combi 322 WD Inox D is designed with a water dispenser, which allows you to fill the water glass and enjoy cold water almost immediately. The water dispenser includes a 2.5-litre (approx.) water tank to be refilled.

To use the water dispenser, follow the instructions below:

1. Open the refrigerator door and make sure the water dispenser is properly fixed.
2. Open the water-tank cover and fill the tank slowly to avoid spillage until full. Then, close the water-tank cover. See Figure 25.
3. Once the water tank is full, set the thermostat to the lowest temperature or Fast Cool mode–after a while, you will be able to dispense cold water for drinking. See Figure 25.
4. When using the water dispenser, some water may drip and collect at the bottom of the dispenser. Clean it with a cloth if necessary.
5. Water must not exceed the max. level line on the tank and be kept below the tank cover.

NOTA:
Do not remove the glass during the dispensing of water.

IMPORTANT:
Depending on external climatic conditions, the cooling rate of the water can vary greatly–in summer, the water will take longer to reach the selected temperature than in winter.

Fig. 25 key:

1. Filling opening
2. Water-tank cover
3. Water tank
4. Water dispensing switch

CLEANING AND MAINTENANCE

If the refrigerator is not to be used for a long period of time:

• Turn off the refrigerator and unplug it from the power supply.
• Remove all the food.
• Clean and dry the interior completely. To prevent mould or unpleasant odours from forming, leave the door slightly open: lock it open or remove it if necessary.
• Store the appliance in a ventilated and dry place, away from heat sources; place the appliance carefully and do not place heavy objects on it.
• The unit must be kept out of the reach of children to prevent them from playing with it.
• Before cleaning, disconnect the power plug; do not connect or disconnect the power plug with your hands wet, as there is a risk of electric shock and injury. Do not spill water directly on the refrigerator to avoid rust, electrical leakage and accidents. Do not reach into the bottom of the refrigerator, as you may get scratched by the sharp metal corners.

Interior and exterior cleaning

• Food residues in the refrigerator can cause undesired odours, so you should clean the refrigerator regularly. The refrigerator compartment should be cleaned once a month.
• Remove all shelves, the crisper box, etc., and clean them with a soft cloth or sponge dampened with warm water or neutral detergent.
• Clean the dust that accumulates on the rear panel and side panels of the refrigerator regularly.
• After using detergent, make sure you rinse it with clean water, and then dry it with a cloth.
• Do not use bristle brushes, steel wire brushes, detergent, soap powder, alkaline detergent, benzine, petrol, acid, hot water or other corrosive elements to clean the refrigerator surface, door gasket, plastic decorative parts, etc., to avoid damage.
• Carefully dry the door gasket and clean the slot with a wooden stick wrapped with cotton. After cleaning, fix the four corners of the door gasket and then gradually push it into the slot in the door.

Power failure or cooling system fault

• If you receive an early power failure warning；
• Activate the fast freeze function, so that food is completely frozen. Set the temperature back to the original setting when the power supply returns to normal.

Note:
It is advisable to run the refrigerator uninterruptedly once you start using it.

Defrost

• This refrigerator includes an automatic defrost function, so there is no need to defrost it  manually.

Light bulb replacement

• The refrigerator has a LED light with low consumption and a long shelf life. In the event of an anomaly, please contact the technical support service. Lights or other parts of the appliance may only be replaced by the manufacturer.
• Energy efficiency level: G

Removing the shelves
Hold the shelves with both hands and push them upwards.
Hold one end of the shelf and lift it up while pulling it out. (Fig. 26)

TROUBLESHOOTING

For the following minor malfunctions, please try to solve the problem yourself before contacting Cecotec Technical Support Service.

mains.

The circuit breakers or fuses are damaged.

There is no power or the fuse trips.

| Plug the refrigerator into the mains.

Open the door and check the light is on.

Abnormal noise

| The refrigerator is not stable.

The refrigerator is in contact with the wall.

| Set the adjustable feet of the refrigerator.

Separate the refrigerator from the

wall.

Low cooling efficiency| The food introduced is hot or there is too much food.

You open the door too often.

The door gasket has objects that do not allow to close it completely.

The refrigerator receives direct sunlight or is close to a heat source. The refrigerator is not well ventilated.

The selected temperature is too high.

| Introduce food in the refrigerator when it is at room temperature. Check and close the door.

Remove the refrigerator from the heat source.

Keep the recommended distances in the installation section so the refrigerator is well ventilated.

Set a suitable temperature.

---|---|---
Unpleasant smells in the refrigerator| There is spoiled food inside. The refrigerator is dirty.

You introduced food with strong

smells.

| Dispose of food which is spoiled. Clean the refrigerator.

Pack food, especially if it has a

strong smell.

You cannot set the temperature.| Check if the Smart or fast freeze functions are not active on the control panel.| Deactivate the special functions and then set the temperature (for more details, check the Functions section).
The temperature on the freezer compartment is shown on the panel, but

it flashes.

| Check that the power supply has not been cut off before.| Press any button to activate the alarm (check the overheating warning section) and check that the food inside the refrigerator is not spoiled.

Note : If none of these situations match your problem, do not attempt to disassemble or repair the device by yourself. Repairs carried out by unqualified persons may result in injury or serious malfunctions. Please contact the local store where you made your purchase. The repair must be carried out by an authorised technician, and you must use only original spare parts.

TECHNICAL SPECIFICATIONS

Product| Bolero CoolMarket Combi 322 White D| Bolero CoolMarket Combi 322 Inox D| Bolero CoolMarket Combi 322 WD Inox D| Bolero CoolMarket Combi 322 Dark D| Bolero CoolMarket Combi 322 Glass White D| Bolero CoolMarket Combi 322 Glass Black D
---|---|---|---|---|---|---
Reference:| 02422| 02423| 02424| 02425| 02426| 02427
QR code| | | | | |
Voltage| 220-240 V~
Rated frequency| 50/60 Hz
Rated current| 1,2 A
Climate class| SN/N/ST/T*
Refrigerant| R600a/39g
Insulation| Cyclopentane

(*) Refrigerator intended for use at room temperatures between 10 °C and 43 °C. This product features a light source with an energy efficiency grade G.
Technical specifications may change without prior notice to improve product quality. Made in China | Designed in Spain

DISPOSAL OF OLD ELECTRICAL AND ELECTRONIC APPLIANCES

This symbol indicates that, according to the applicable regulations, the product and/or battery must be disposed of separately from household waste. When

this product reaches the end of its shelf life, you should dispose of the cells/batteries/accumulators and take them to a collection point designated by the local authorities.  Consumers must contact their local authorities or retailer for information concerning the correct disposal of old appliances and/or their batteries.
Compliance with the above guidelines will help protecting the environment.

TECHNICAL SUPPORT AND WARRANTY

Cecotec shall be liable to the end user or consumer for any lack of conformity that exists at the time of delivery of the product under the terms, conditions, and deadlines established by the applicable regulations.
It is recommended that repairs are carried out by qualified personnel.
If at any moment you detect any problem with your product or have any doubt, do not hesitate to contact the official Cecotec Technical Support Service at +34 963 210 728.

COPYRIGHT
The intellectual property rights over the texts in this manual belong to CECOTEC INNOVACIONES, S.L. All rights reserved. The contents of this publication may not, in whole or in part, be reproduced, stored in a retrieval system, transmitted, or distributed by any means (electronic, mechanical, photocopying, recording or similar) without the prior authorization of CECOTEC INNOVACIONES, S.L.

Cecotec Innovaciones S. L.
C/de la Pinadeta s/n, 46930 Quart de Poblet, Valencia, Spain

www.cecotec.es

References

• Cecotec Tienda Oficial | Envío Gratis | Mejor Precio

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>