Bushnell Golf WINGMAN 2 Bluetooth Speaker Bluetooth Remote User Guide
- June 16, 2024
- Bushnell Golf
Table of Contents
WINGMAN 2
Bluetooth Speaker + Bluetooth Remote
QUICK START GUIDE
Model #Wingman 2, WM2 Remote
What’s in the box
1 – Wingman 2
1 – Wingman 2 Remote
1 – USB Cable
Connect to the app
Scan code to download the Bushnell Golf App.
app.bushnellgolf.com/install
https://app.bushnellgolf.com/install
- Register the Wingman 2 on the app.
- Get shot distances.
- Get First tee introductions for up to 8 golfers.
- Create up to 10 custom sound bites.
Speaker button functions
PLAY GOLF MODE button functions
Remote functions
*Bushnell
Golf App needs to be running in the foreground or background of your phone for
the remote to control music.
Light Indications
Battery Life Indicator
Charging Port
A complete instruction manual is available at
www.bushnellgolf.com.
The manual includes the warranty coverage terms and repair contact
information. Be sure to register your product at
www.bushnellgolf.com.
WARNING
• INGESTION HAZARD:
This product contains a button cell or coin battery.
• DEATH or serious injury can occur if ingested.
• A swallowed button cell or coin battery can cause Internal Chemical
Burns in as little as 2 hours.
• KEEP new and used batteries OUT OF REACH OF CHILDREN.
• Seek immediate medical attention if a battery is suspected to be
swallowed or inserted inside any part of the body.
• For treatment information, call the National Battery Ingestion Hotline at
1(800)498-8666.|
CR2032 3V Lithium Coin Cell
WARNING: Bite feature included with device contains a Neodymium magnet. Magnets could affect the functioning of pacemakers and implanted heart defibrillators. If you use these devices, keep suficient distance from magnet. Warn others who wear these devices from getting too close to magnets.
- Magnet may lose part of its adhesive force permanently if exposed to temperatures above 175˚ F (80˚ C).
- Magnets produce far-reaching, strong magnetic field. They could damage TVs and laptops, computer hard drives, credit and ATM cards, data storage media, mechanical watches, hearing aids and speakers. Keep unit away from devices and objects that could be damaged by strong magnetic fields.
FCC Statement
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Shielded interface cable must be used with the equipment in order to comply
with the limits for a digital device pursuant to Subpart B of Part 15 of FCC
Rules. Specifications and designs are subject to change without any notice or
obligation on the part of the manufacturer.
(MainUnit) FCC ID:—–
(MainUnit) IC: ——-
(Remote) FCC ID:—–
(Remote) IC: —- KCC ID: R-R-x6S——-
KCC ID: R-R-x6S——–
CMIIT ID: ——–
CMIIT ID: ——–
219——
219——–
| ——/SDPPI/2023
14455
---|---
| ——/SDPPI/2023
14455
Industry Canada Statement
This device complies with ISED’s licence-exempt RSSs.
Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Radiation Exposure Statement:
This device complies with RF radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be colocated or operating
in conjunction with any other antenna or transmitter.
When operating the device, a minimum distance of 0cm should be maintained
between the radiator of the speaker and the user’s body, and a minimum
distance of 0cm should be maintained between the radiator of the remote
control and the user’s body.
Disposal of Electric and Electronic Equipment
(Applicable in the EU and other European countries with separate collection
systems)
**** This equipment contains electric and/or electronic parts and must
therefore not be disposed of as normal household waste. Instead, it should be
disposed at the respective collection points for recycling provided by the
communities. For you, this is free of charge. If the equipment contains
exchangeable (rechargeable) batteries, these too must be removed before and,
if necessary, in turn be disposed of according to the relevant regulations
(see also the respective comments in this unit’s instructions). Further
information about the subject is available at your community administration,
your local waste collection company, or in the store where you purchased this
equipment.
Caution: There are no user controls, adjustments or procedures.
Performance of procedures other than those specified herein may result in
access to invisible laser light.
This product contains no user serviceable controls.
This product must not be opened or modified by the consumer.
This product must be returned to the manufacturer for service.
Device specifications and design are subject to change without notice or
obligation on the part of the manufacturer.
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
http://bushnellgolf.com/patents
Made in China