ASD-OCL-1I-2660-WH Round Cylinder Wall Mount Light Fixture Instructions
- June 16, 2024
- ASD
Table of Contents
ASD-OCL-1I-2660-WH Round Cylinder Wall Mount Light Fixture Instructions
▶ DESIGN – ROUND OUTDOOR WALL CYLINDER has a modern design with effective
up/down illumination. This E26 base fixture is made from die-cast aluminum and
a tempered glass cover. It is a durable lighting fixture that is highly
resistant to rust, making it perfect for a variety of applications. The high
quality reflector creates a 50° beam angle.
▶ PHOTOCELL – The built-in Dusk to Dawn Photocell will automatically turn
the fixture on/off depending on the time of day.
▶ BULBS – The fixture includes a standard E26 medium base which is
compatible with a variety of incandescent, CFL or LED bulbs less than 60W.
▶ APPLICATION – The fixture is rated for Wet Locations, making it perfect
for indoor and outdoor projects such as decks, front doors, porches, patios,
corridors, walkways, or any other common areas.
▶ ADVANTAGES – ASD provides a 5-year limited warranty along with ETL
certification to guarantee top quality products and safety!
PRODUCT SPECIFICATIONS:
PACKAGE CONTENTS:
BUILT-IN PHOTOCELL INFORMATION
The dusk-to-dawn sensor automatically turns the fixture off during daylight hours.
INSTALLATION GUIDE
IMPORTANT SAFETY INFORMATION:
Please read all the instructions below before installation.
- Make sure that the supply voltage corresponds to the rated product voltage.
- The product must be installed by a qualified electrician in accordance with the National Electrical Code and corresponding local codes.
- If the product is damaged, do not use it.
WARNING
RISK OF PERSONAL INJURY – READ and follow all WARNINGS and installation
instructions. Keep or give to the owner for future reference.
Risk of cuts: Wear gloves to prevent cuts or abrasions when removing from
carton, handling, installing, and maintaining this product.
Risk of electric shock: This product must be installed in accordance with
the applicable installation code by a person familiar with the construction
and operation of the product and the hazards involved.
Risk of Fire: Minimum 194°F supply conductors. Consult a qualified
electrician to ensure correct branch circuit conductor.
ASD® assumes no responsibility for claims arising out of improper or careless
Installation or handling of this product.
INSTALLATION STEPS:
- Remove the glass cover and install the bulbs (A19/60W max). In models with photocell option remove the photocell cap to make the dusk-to-dawn sensor operate.
- Screw the two mounting screws onto the mounting plate. Attach the mounting plate to the outlet box using the screws. Make sure the threads of the mounting screws are facing outside when the mounting plate is attached to the outlet box.
- Connect the wires: Black to Black, White to White, Ground to Ground. Secure the connection with wire nuts. Place the fixture base on the wall by aligning the protruding mounting screws through the holes on the wall plate. Put the waterproof gasket on each mounting screw. Tighten the fixture to the wall using two decorative nuts. For outdoor locations please use silicone (not included) shown in the picture below
- The fixture must be mounted vertically with the photocell sensor facing up.
ORDERING INFORMATION
For most up-to-date spec sheets please refer to asd-lighting.com
ASD LIGHTING CORP
E-mail: orders@asd-lighting.com
Web site: www.asd-lighting.com