BLASTRAC 1-8DM Shot Blasting Machine Instruction Manual
- June 16, 2024
- BLASTRAC
Table of Contents
BLASTRAC 1-8DM Shot Blasting Machine
Product Information
Specifications
- Product Model: 1-8DM
- Version: 1.2
Spare Parts
Item | Blastrac Part Number | HQV Part Number | Description | Quantity |
---|---|---|---|---|
1 | PG-10522 | 533088601 | MOTOR BASE PLATE | 1 |
Accessories
Item | Blastrac Part Number | HQV Part Number | Description | Quantity |
---|---|---|---|---|
1 | PG-10521 | 533245101 | BLAST HOUSING | 1 |
Contact
Blastrac NA
13201 North Santa Fe Avenue
Oklahoma City, OK 73114
Tel: 800-256-3440
Fax: 405-478-8608
Website: www.blastrac.com
Product Usage Instructions
Spare Parts Replacement
- Ensure the product is turned off and unplugged.
- Refer to the Spare Parts section of the user manual to identify the required part.
- Locate the corresponding part number and quantity in the table.
- Remove any necessary components to access the area where the spare part needs to be replaced.
- Carefully remove the old part and replace it with the new part.
- Reassemble any components that were removed.
- Ensure all connections are secure and the part is properly installed.
Accessories Installation
- Ensure the product is turned off and unplugged.
- Refer to the Accessories section of the user manual to identify the desired accessory.
- Locate the corresponding part number and quantity in the table.
- Follow the provided instructions or diagrams to install the accessory onto the product.
- Ensure all connections are secure and the accessory is properly installed.
Electrical Setup
To set up the product for electrical use, follow these steps:
- Determine the voltage required for your specific electrical setup (220V or 110V).
- Refer to the Electrical section of the user manual and locate the corresponding figure (Fig. 04 for 220V or Fig. 05 for 110V).
- Follow the provided diagram to connect the product to the appropriate power source.
- Ensure all connections are secure and the electrical setup is properly completed.
FAQ
-
Q: How can I order spare parts?
A: To order spare parts, please contact Blastrac NA at Tel: 800-256-3440 or visit their website at www.blastrac.com. -
Q: Can I use accessories from other brands with this product?
A: It is recommended to use Blastrac accessories specifically designed for this product to ensure compatibility and optimal performance.
Spare Parts
Item| Blastrac Part Number| HQV Part number| Description|
QTY.
---|---|---|---|---
1| PG-10522| 533088601| CHASSIS – 1-8DM| 1
2| CP-10889| 533675401| MOTOR – 110V| 1
CP-10890| 533635701| MOTOR – 220V| 1
3| 6908170- EU| 533354701| MOTOR BASE PLATE| 1
4| CP-10846| 533843401| NUT/COUPLING| 2
5| 6908190| 533224401| SHEAVE| 1
6| 6908380| 533547801| BUSHING/ TAPER LOCK| 1
7| 6908200| 533224301| SHEAVE| 1
8| 6908370| 533933501| TAPERLOCK BUSHING| 1
9| P000107- EU| 533453201| BELT GUARD| 1
10| CP-10759| 533917501| SHOULDER BOLT| 2
11| E03603| 533771201| WHEEL| 2
12| PA-11204| 533351801| REAR WHEEL BRACKET| 2
13| CP-10884| 533992301| FRONT CASTER| 1
14| E07380| 533834101| BLASTRAC LOGO (RADIUS)| 2
15| 999- 9159| 534044401| STRAIN RELIEF| 1
16| 06100006| 533931201| BELT| 2
Item| Blastrac Part Number| HQV Part number| Description|
QTY.
---|---|---|---|---
1| PG-10521| 533245101| BLAST HOUSING| 1
2| 979085| 533185901| BEARING UNIT| 1
3| 9790660| 533038501| BRACKET/ALUM BRG MTG|
1
4| PA-11203| 533476501| SEAL/BEARING MOUNTINGPLATE| 1
5| 9763100| 534035901| HUB| 1
6| 4923050- EU| 533805101| WHEEL-KIT 6.50″| 1
7| 9763240- EU| 533762801| CONTROL CAGE BRACKET|
1
8| P000001| 533932401| MAGNETIC VALVE ASSY| 1
9| 9700120| 533003401| CLAMP/CONTROL CAGE| 2
10| 6916120| 533025201| NIPPLE/ THROTTLE & NUT| 1
11| PA-11206| 533203601| LATCH/BLASTHOUSING LID|
1
12| PA-11211| 533164501| SHOT TRAY| 1
13| 4973070- EU| 533733201| LINER/TOP| 1
14| 6908260- EU| 533795701| LINER/RIGHT HAND SIDE
HATCHET| 1
15| 6908250- EU| 533794701| LINER/LEFT HAND SIDE
HATCHET| 1
16| 6811540- EU| 533777401| RETAINER/SIDE SKIRT|
2
17| 6811550| 533705801| SKIRT/SIDE| 2
18| 9697800| 533517001| MAGNET/SIDE| 2
19| 9697630| 533799701| MAGNET/FRONT| 1
20| 6908300| 533672501| BRUSH/FRONT & REAR| 2
Item| Blastrac Part number| HQV Part number|
Description| Qty.
---|---|---|---|---
1| CP-10888| 534084801| VARIABLE FREQUENCY DRIVE – 120V|
1
CP-10887| 534084601| VARIABLE FREQUENCY DRIVE – 220V| 1
2| PA-11212| 533343901| VFD MOUNTING PLATE| 1
3| PG-10529| 533060101| VFD LID| 1
4| 800931| 533888201| HEX CAP SCREW| 2
5| CP-10879| 533773301| DRAW LATCH| 2
6| CP-10882| 533926101| NYLON ADJUSTABLE HANDLE| 2
7| CP-10880| 533899601| CARRIAGE BOLT| 2
8| E15538| 534612301| HANDLE ONLY| 1
E15539| 534363301| BRACKET FOR HANDLE| 1
CP-10886- 1_1| 534377101| SHOT CABLE| 1
9| CP-10874| 533948601| HANDLE/GRIP| 2
10| PA-11210| 533175601| BAR/HANDLE| 2
11| PG-10527| 531462001| HANDLE| 1
12| CP-10883| 533077401| SWITCH/ ON/OFF| 1
13| P000443| 533751401| AMMETER/AC| 1
14| P003739| 533681101| CORD GRIP| 2
Accessories
Item| Blastrac Part Number| HQV Part number| Description|
QTY.
---|---|---|---|---
1| PG-10539| 534050601| 4” Edge Pattern Reducer| 1
2| PG-10540| 534052201| 5” Edge Pattern Reducer| 1
3| PG-10541| 534050701| 6” Edge Pattern Reducer| 1
Electrical
220V
110V
Contact
Blastrac NA
13201 North Santa Fe Avenue Oklahoma City, OK 73114
Tel: 800-256-3440
Fax: 405-478-8608
www.blastrac.com
References
- Construction products, machines and diamond tools | Husqvarna INT
- Construction products, machines and diamond tools | Husqvarna INT
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>