beko B5T64237WM Dryer User Manual

: June 16, 2024
: Beko

Table of Contents

beko B5T64237WM Dryer
Product Usage Instructions
Safety Instructions
Intended use
Your drying machine
General appearance
Preparation
Symbols
Read User Manual Online (PDF format)
Download This Manual (PDF format)

beko B5T64237WM Dryer

beko-B5T64237WM-Dryer-product

Specifications

Model : B5T64237WM
Language : EN
Product Code : 2960313481_EN/060423.0951

Product Usage Instructions

Safety Instructions

Intended use

Ensure that you use the dryer according to its intended purpose as described in the user manual.

Safety of children, vulnerable persons and pets

Keep children, vulnerable persons, and pets away from the dryer to prevent accidents or injuries.

Electrical Safety

Follow electrical safety guidelines to avoid the risk of electric shock.

Transporting safety

When transporting the dryer, tilt it to the right side when viewed from the front to prevent any damage.

Installing safety

Refer to the installation table for the recommended stacking kit types and sizes for your washing machine and tumble dryer combination.

Usage safety

Follow these safety guidelines while using the dryer:

Do not overload the dryer.
Clean the lint filter before each use.
Do not dry items that are soaked in flammable substances.
Avoid placing items with metal parts in the dryer.

Maintenance and cleaning safety

Follow these safety guidelines while maintaining and cleaning the dryer:

Disconnect the power supply before cleaning or performing maintenance.
Use only recommended cleaning products and methods.
Avoid touching hot surfaces during or immediately after use.

Lighting safety

Do not expose the dryer to UV radiation sources to prevent any hazards.

Environmental instructions

Compliance with the WEEE Regulations and Waste Disposal

This product complies with the WEEE Regulations and does not contain dangerous or prohibited materials. Dispose of this product according to local waste disposal regulations.

Packaging information

The product’s packaging is made of recyclable materials in accordance with the National Environment Legislation.

Standard conformity and test information / EU declaration of conformity

The product was manufactured using the latest technology in environmentally friendly conditions.

Your drying machine

Technical specifications

Refer to the user manual for detailed technical specifications of the dryer.

General appearance

The dryer has a sleek and modern design. Refer to the user manual for visual representation.

Scope of delivery

The dryer is delivered with the necessary accessories and components. Refer to the user manual for a complete list of items included in the package.

Installation

Follow the installation instructions provided in the user manual to properly install the dryer.

Preparation

Before using the dryer, ensure that you have read and understood all safety instructions and completed the installation process.

Running the product

Follow the user manual instructions to operate the dryer effectively. It includes information on different drying cycles, temperature settings, and additional features.

Maintenance and cleaning

Regular maintenance and cleaning are essential for optimal performance and longevity of the dryer. Follow the guidelines provided in the user manual for proper maintenance and cleaning procedures.

Troubleshooting

If you encounter any issues or problems with the dryer, refer to the troubleshooting section in the user manual for possible solutions.

FAQ

Q: Is the dryer safe for children and pets?
- A : No, it is important to keep children, vulnerable persons, and pets away from the dryer to prevent accidents or injuries.
Q: Can I overload the dryer?
- A : No, it is not recommended to overload the dryer as it may affect its performance and can lead to potential issues.
Q: How often should I clean the lint filter?
- A : It is recommended to clean the lint filter before each use to ensure efficient drying and prevent lint buildup.
Q: Can I dry items soaked in flammable substances in the dryer?
- A : No, it is important to avoid drying items that are soaked in flammable substances as it can pose a fire hazard.
Q: Can I place items with metal parts in the dryer?
- A : It is best to avoid placing items with metal parts in the dryer as they can cause damage to the drum or other components.
Q: How should I dispose of the product?
- A: Dispose of the product according to local waste disposal regulations. Do not dispose of it with other domestic waste.

Dear Customer ,

Please read this guide prior to use this product!

Thank you for choosing Beko product. We would like you to achieve the optimal efficiency from this high quality product which has been manufactured with state of the art technology. Please make sure you read and understand this guide and supplementary documentation fully before use.
Observe all warnings and information herein. Therefore you can protect both yourself and your product against potential damages. Keep the manual. Include this guide with the unit if you hand it over to someone else.

Symbols and Remarks

The following symbols are used in the user guide:

Danger that may cause death or injury

Read the manual

Important information or useful usage tips

Warning against hot surfaces

Warning against electric shock

Warning against UV Radiation hazard

The product’s packaging is made of recyclable materials, in accordance with the National Environment Legislation.

Warning against fire

Danger that may cause material damage on the product or surrounding area

This product was manufactured using the latest technology in environmentally friendly conditions.

Safety Instructions

This section includes the safety instructions necessary to prevent the risk of personal injury or material damage.

Our company shall not be held responsible for damages that may occur if these instructions are not observed.
Installation and repair operations shall always be performed by Authorized Service.
Use original spare parts and accessories only.
Do not repair or replace any component of the product unless it is clearly specified in the operation manual.
Do not modify the product.

Intended use

Product is designed only for household use. It is not intended for commercial use.
The product is not designed for outdoor use.
Do not install or operate the product where freezing is a possibility and/or vulnerable to external elements. Water frozen in the pump or the hoses may cause damages
Product can only be used to dry and ventilate laundry which are washed with water and drying machine safe.

Safety of children, vulnerable persons and pets

This product may be used by children aged 8 years and older and persons with underdeveloped physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a the product safe way and the hazards involved. Children should not tamper with the device. Cleaning and maintenance should not be carried out by children unless they are supervised.
Children under 3 years old shall be kept away from the product unless supervised.
Electrical products are dangerous for children and pets. Children and pets shall not play with the product, climb on or get inside the product.
Keep the product door closed even when not operated. Children or pets could be locked inside the product and suffocate.
Cleaning and user maintenance operations must not be performed by children unless supervised.
Keep the packaging materials away from children. Risk of injury and suffocation.
Keep all additives used with the product away from children.
Before disposing of the product, cut the power cord and destroy the loading door.

Electrical Safety

The product must not be plugged in during installation, maintenance, cleaning, repair and transporting operations.
If the power the cord is damaged, it shall be replaced by authorized service to avoid any risk that may occur.
Do not tuck the power cord under the product or to the rear of the product. Do not put heavy items on the power cord. Power cord shall not be kinked, pinched and shall not come in contact with any heat source.
Do not use an extension cord, multi-plug or adaptor to operate your product.
The product shall not be powered via an external switch such as a timer or shall not be connected to a circuit that is regularly opened and closed with a tool.
The plug shall be easily accessible. If this is not possible, a mechanism that meets the electrical legislation and that disconnects all terminals from the mains (fuse, switch, main switch, etc.) shall be available on the electrical installation.
Do not touch the plug with wet hands.
When unplugging the appliance, don’t hold the power cord, but the plug.

Transporting safety

Unplug the product prior to transport, empty the water tank and if any, remove the water drain connections.
This product is heavy, do not handle it by yourself.
Take required precautions for the product against falling and tipping. Do not crash or drop the product when transporting.
Do not use the extruding parts of the product (such as the loading door) to move the product.
Move the product in upright position. If it cannot be moved upright, transport via tilting to the right side when viewed from the front.

Installing safety

To prepare the product ready for installation, ensure that the electrical installation and water drain is proper by checking the information in the user manual. If it is not suitable for installation, call a qualified electrician and plumber to arrange the utilities as necessary. These operations shall be undertaken by the customer.
Check for any damage on the product before installing it. Do not have the product installed if it is damaged.
Do not remove the adjustable stand.
Place the product on a level and hard surface and balance with the adjustable legs.
The gap between the product and the floor shall not be reduced via materials such as rugs, pieces of wood and bands. The ventilation holes under the base of the product shall not be clogged with a rug.
The product shall be installed not to clog the ventilation holes.
Install the product in an environment free of dust with good ventilation.
Do not install the product in close proximity to flammable and explosive materials and do not keep flammable and explosive materials near the product when it is in operation.
The product shall not be installed against a door, sliding door where the product loading door cannot be completely opened, or behind a hinged door where the product hinge is faced against the door’s hinges.
Install the product where periodic maintenance and cleaning can be done with ease.
Place the product with its back surface to the wall (for heater models).
After placing the product, ensure that the back wall does not come in contact with any extrusion (a water tap, electrical outlet etc.).
Place the product with at least 1 cm space between the product and the furniture edges.
Follow the flue connection rules specified in the guide (for models with flue).
The exhaust air shall not be directed to flue which is used to exhaust the smoke of devices that consume gas or other fuels (for models with flue).
The ventilation hose shall not be connected to a heating stove or a chimney flue (for models with flue).
Plug the product to a grounded outlet protected with an appropriate fuse in align with the specified type and current rates. Have an expert electrician set grounding equipment. Do not use the product without a grounding conforming with regional/national regulations.
Plug the product in a grounded socket that conforms with the voltage, current and frequency values specified in the type label.
Do not plug the product to loose, broken, dirty, greasy sockets or sockets that has come out their seats or sockets with a risk of water contact.
The new hose sets supplied with the product shall be used. Do not re-use the old hose sets. Do not make attachments to the hoses.
Place the power cord and hoses not cause a risk of tripping over.
To use the product on top of a washing machine, a fixing aperture shall be used between two products. Fixing aperture shall be mounted by the authorised service.
When the product is placed on the washing machine, their combined weight when full could be around 180 kg. Place the products on a sturdy floor that can carry adequate amount of load.
Washing machine cannot be placed on top of the drying machine

Installation Table for Washing Machine and Tumble Dryer

Stacking Kit Type| Depth Size (TD=Tumble Dryer, WM: Washing Machine)
Plastic – 54/60cm w or w/o belt| 60cm TD –> WM≥50cm / 54cm TD –> WM≥45cm
Plastic – 46cm w or w/o belt| 46cm TD –> WM≥40cm
With Shelf – 60cm| 60cm TD –> WM≥50cm
With Shelf – 54cm| 54cm TD –> WM≥45cm

Usage safety

The maximum weight of dry laundry prior to washing is specified in “Technical Specifications” section.
Do not place the unwashed items in the drying machine.
Items that are soiled with materials such as cooking oils, acetone, alcohol, petrol, kerosene, stain removers, turpentine, wax or was removers shall be washed in hot water with more amount of detergent prior to drying with the drying machine.
If chemicals are utilized for cleaning, the drying machine shall not be used.
Rubber foam (latex foam), shower bonnets, water resistant textiles, rubber supported materials and clothes, pillows with rubber foam pads shall not be dried in a drying machine.
The items with hair spray, hair product residue or similar materials shall not be dried in a drying machine.
Empty the pockets of the clothes and remove items such as matches and lighters.
If all items cannot be removed rapidly and cannot be placed where heat can dissipate, do not stop the drying machine before drying cycle completed.
The last part of the drying machine cycle is conducted without heating (cooling cycle) in order to ensure that the items are kept at a temperature that will not harm the items.
Laundry softeners or similar products shall be used in align with the laundry softener instructions.
Do not use the drying machine without the fibre filter.
Do not allow fibre accumulation around the drying machine.
To prevent back draft of gas in the room from the devices that consume other fuels, including open fire, appropriate ventilation shall be provided (for models with flue).
Do not operate the product together with heaters such as gas heater and a chimney. It may cause the flue to catch fire. (for models with flue)
Do not lean or sit on the loading door when it is open, the product may tip over.
Do not get on the product.
Do not place a source of flame (candles, cigarettes, etc.) on the product or in the vicinity of it. Do not keep flammable/explosive materials.
Do not touch the drum as it revolves.
The back wall of the product will be hot during operation. Do not touch the back side of the product during drying or after the drying process is completed. (For models with heating)
Do not touch the inner surface of the drum while adding or removing clothes during a continuing program. The drum surface is hot.
Do not press the buttons with sharp objects such as forks, knives, with your nails etc.
Do not operate the faulty or damaged product. Unplug the product (or shut down the connected fuse) and call the authorized service.
Unplug the product when not in use.
Do not place the dryer in the rain or severely wet areas.

Maintenance and cleaning safety

Do not wash the product by spraying or pouring water on it. Do not use a pressure cleaner, steam cleaner, hose or pressurised gun to clean the product.
Do not use sharp or abrasive tools to clean the product.
Do not use materials such as household cleaning agents, soaps, detergents, gas, gasoline, alcohol, wax, etc. to clean the product.
The fibre filter shall be regularly cleaned. After each drying cycle, clean the fibre filter and the inner surface of the loading door.
Clean the fibre accumulation on the fins of the evaporator behind the filter drawer with a vacuum cleaner. You can clean by hand, provided you wear protective gloves. Do not try to clean with bare hands. Evaporator fins may damage your hands. (For products with heat pump)
Due to fire and explosion hazard, do not use solutions, cleaning materials, steel wool or similar materials and tools to clean sensors.
Clean the flue. (for models with flue)
Do not drink the condensed water.

Lighting safety

Contact an authorized service when you need to replace the LED/bulb using for lighting (for products with lighting).

Environmental instructions

Compliance with the WEEE Regulations and Waste DisposalThis product does not contain the dangerous and prohibited materials indicated in the “Regulation on The Control of Waste Electrical and Electronic Equipment” published by Ministry of Environment and Urbanisation of Republic of Turkey. Complies WEEERegulations. This product was manufactured from recyclable and reusable high qualityparts and materials. Therefore, do not dispose of this product with other domestic wastes at the end of its life cycle. Take it to a collection point for electrical and electronic equipment. You can ask your local administration about these collection points. You can help protect the environment and natural resources by delivering the used products for recycling.

Also R290 is a flammable refrigerant. Therefore ensure that the system and pipes are not damaged during operation and transportation. Keep the product from heat sources, otherwise it may catch fire if damaged.Do not dispose of the product by throwing it into fire.

Packaging information

The product’s packaging is made of recyclable materials, in accordance with the National Legislation. Do not dispose the packaging waste with the household waste or other wastes, dispose it to the packaging collection areas specified by local authorities.

Standard conformity and test information / EU declaration of conformity

The development, manufacturing and sales phases of this product is conducted in conformity with the safety rules specified in all related instructions of the European Union.

Frequency Band	: 2.400 – 2.484 GHz
Max. Transmission Power	: < 100mW

Conformity declaration for CE

Arcelik A.S. hereby declares that this appliance complies with Directive 2014/53/EU.

The complete text of the EU declaration of conformity is available in the following internet address:

– Products, from :support.beko.com

Your drying machine

Technical specifications

See type label***

Rated power input
Model code

Min. height: Height with the adjustable stand closed.
Max. height: Height with the adjustable stand opened at maximum height.
Weight of dry laundry before washing.
Data plate is under the door on the drying machine.

In order to increase the drying machine’s quality, the technical specifications may be changed without prior notice. Figures in this manual are schematic and may not exactly match the product. The values provided with the drying machine or its accompanying documents are laboratory readings in accordance with the respective standards. These values may differ depending on the use and ambient conditions.

General appearance

Top panel
Control panel
Loading door
Toe board handle
Ventilation grids
Adjustable feet
Toe board
Rating plate
Lint filter
Water tank drawer
Power cord

Scope of delivery

Optional – may not be included, depends on model.

Installation

Read the “Safety Instructions” first!

It is customer’s responsibility to prepare the location the drying machine shall be placed on and also have power and waste water installation prepared.

Check for any damage on the drying machine before installing it. If drying machine is damaged, do notget it installed. Damaged products cause a risk for your safety. Wait 12 hours prior to operating the drying machine.

NOTICE : The product includes a cooling agent and if the product is operatedright after its transported, it may get damaged. After each time the product is moved, it shall be left torest for 12 hours.

Right place for installation

Install the drying machine on a flat and stable surface.
Dryer machine is heavy. Do not move it by yourself.
Operate the drying machine in anenvironment free of dust with good ventilation.
The gap between the drying machine andthe floor shall not be reduced via materials such as rugs, pieces of wood and bands.
Do not block the ventilation grilles of the drying machine.
There shall not be doors that can be locked, sliding doors or hinged doors nearthe installation environment of the drying machine that may block the loading door to be opened.
Once the drying machine is installed, the connections must stay stable. After placing the drying machine, ensure that the back wall does not come in contact with any extrusion (a water tap, electrical outlet etc.).
Place the drying machine with at least 1cm space between the product and the furniture edges.
Your drying machine is suitable to be operated between +0°C to +35°C. If operated outside this temperature range, your drying machine’s operation may be compromised and get damaged.
The drying machine shall not be placed with the back side against a wall.
Do not place the drying machine on its power cord.
Ignore following warning if your product’s system does not contain R290.
Dryer contains R290 refrigerant. R290 is an environment-friendly, but flammable refrigerant. Ensure that the air inlet of the dryer is open and it is well-ventilated.*Keep potential flame sources awayfrom the dryer.

Removing the shipping safety group

Connection of water drain hoseon products with vapour feature
You can directly drain accumulated water through the water drain hose supplied with the product instead of periodically draining the water collected in the water tank

If your dryer has a steam feature, follow the following diagram for the water discharge connection.

Remove the clamp attached to the stopper at the back of the dryer by pulling it from the place it is connected with the help of a tool.
After removing the clamp, pull the plug under the clamp.
Attach the water drain hose supplied with the machine to the pipe under the plug.
Your machine is ready for use with direct discharge.

NOTICE

The water discharge hose shall be fixed at maximum 80 cm height. Ensure that the water dischargehose do not get kinked, collapsed or pressed on between the discharge and the drying machine. Hose shall be connected not to be disconnected from its location. Leaked water may cause damage.Do not extend the water drainagehose. Check whether the water runs at an appropriate flow. The drainage lineshall not be closed or clogged.

If an accessory package is provided with your product, check the detailed instructions.

Adjusting the stands

Until the drying machine stands level and sturdy, adjust the stands by turning them left and right.

Moving the drying machine

Drain the water in the drying machine completely.
If the product is connected via direct discharge, remove the hose connections.

The drying machine is recommended to be moved in upright position. Otherwise, tilt it to the right side when viewed from thefront and move the drying machine. Wait 12 hours prior to operating the drying machine.

Warning regarding the noise

As the product is operated, metallic noises may come from the compressor from time to time, it is normal.

When the product is operated, the accumulated water is pumpedto the water tank. It is normal to hear pumping sounds from the appliance during this operation.

Replacing the lighting bulb

If your drying machine has drum lighting lamp; Consult the authorized service to replace the bulb/LED used in lighting your drying machine.The bulb in this product is not suitable for home lighting. The intended use of this lamp is toensure safely loading the laundry to the drying machine. The lamps used in this appliance is resistant to heavy physical conditions such as temperatures over 50°C.

Preparation

Read the “Safety Instructions” first!

Laundry suitable for drying in drying machine

Laundry that are not drying machinesafe may damage the appliance andthe laundry during drying. Follow the instructions on the labels on thelaundry to be dried. Only dry the laundry with “drying machine safe” written on their labels.

NOTICE

Undergarments with metal supports shall not be dried in drying machine. If these metal supports get loose and ripped from the garment, it may damage the machine.Delicate embroidery textiles, cotton and silk garments, garmentsmanufactured from delicate and valuable textiles, non breathinggarments and tulle curtains shall not be dried in drying machine.

Preparing the laundry to be dried

NOTICE

Items such as coins, metal parts,needles, nails, screws, stones etc. may damage the drum group of the product or may cause functionaloperation issues. Therefore check all laundry that will be loaded to the product. Dry the laundry with metal accessories such as zippers by turning them inside out. Close the zippers, hooks andclasps, button up the covers’ buttons, tie textile belts and apron belts.

What to do for energy saving

Use the highest possible wringing option as you wash the laundry. Therefore you can reduce the drying period and reduce energy consumption. Sort the laundry based on their types and thickness. Dry same types of laundry together. For instance kitchen towels and table cloths dry faster than bathroom towels.
Follow the recommendations in the user manual for program selection.
During drying do not open the loading door unless necessary. If you are required to open the loading door, do not keep it open for too long.
Do not add wet laundry as the drying machine operates.
Clean the Fibre Filter before and after each drying session.
For condensation models, be sure to clean the condenser at least once a month or after each 30 drying sessions.
Make sure the filters are clean. Refer to maintenance and cleaning for details.
For models with flue, follow the flue connection rules specified in the guides and clean the flue.
During drying session, properly ventilate the environment in which the drying machine is in.
On models with heat pump, check the condenser at least every six months and clean it if it is dirty.
If you are using environment friendly filter, you are not required to clean the filter after every cycle. When the environmentfriendly icon is lit on the screen, change the filter cloth.

Correct load capacity

NOTICE

If the laundry in the product exceed maximum load capacity, it may not operate as intended and may causematerial damage or damage the product.For each program, follow the maximumload capacity.

The weights below are provided as examples.

Laundry

| Approx. weight (g)*|

Laundry

|

Approx. weight (g)*

---|---|---|---
Cotton bedding (double size)|

1500

|

Cotton dress

|

500

Weight of dry laundry before washing.

Control Panel

Running the product

beko-B5T64237WM-Dryer-fig22

Program selection button.
On / Off button.
Start / Pause button.
End time selection button.
Wrinkle prevention and Timer program selection button.
Buzzer selection button.
Express Dry (RapiDry) button and child lock selection button.
Steam program selection button.
Low temperature selection button.
Remote control button.
Drum light button.
Dryness level selection button.

Symbols

beko-B5T64237WM-Dryer-fig23

Preparation of drying machine

Plug the drying machine.
Open the loading door.
Place the laundry to the drying machine without jamming them.
Push and close the loading door.

NOTICE
Ensure that no laundry is jammed to the loading door. Do not close the loading door with force.

Select the desired program by using On/Off/Program Selection button, the machine will turn on.

Selecting the program with the On/Off/Program Selection button does not mean that the program started. Press Start / Stand-by button to start the program.

Program selection and consumption chart

beko-B5T64237WM-Dryer-fig25

beko-B5T64237WM-Dryer-fig26 beko-B5T64237WM-Dryer-
fig27

Allergy UK is the trademark of the British Allergy Foundation. The Seal of Approval has beencreated to guide people requesting an advice that the product significantly reduces the amount of the allergens in an environment where allergic people are present or the product restricts/reduces/ eliminates the allergens. The purpose is toprovide evidence that the products have been scientifically tested or analysed to yield measurable results.

Auxiliary functions Dryness level

Dryness level button is used for adjusting to desired dryness. Program time may change depending on the selection.

You can activate this function only prior to start of program.

Wrinkle prevention

You can turn on and off the wrinkle prevention function by pressing the wrinkle prevention selection button. If you will not take thelaundry out immediately after the program has completed, you may use Wrinkle prevention function to prevent wrinkling of your laundry.

Audible warning

Drying machine makes an audible warning when the program is completed. Press the “Audible Warning” button if you do not want audible warning. When you press the audiblewarning button, the light goes off and it doesnot sound when the program is completed.

You can select this function before the program starts or after the program starts.

Low temperature

You can activate this function only prior to start of a program. You can activate this function if you want to dry your laundry at a lower temperature. The program duration will be longer after it becomes activated. End time

You can delay the end time of the program up to 24 hours with end time function.

Open the loading door and place the laundry.
Select the drying program.
Press the End Time selection button and set the delay time you wish. End time LED turns on. (When pressed and hold the button, End Time proceeds non-stop).
Press the Start / Stand-by button. End Time countdown begins. The “:” sign in the middle of displayed delay time flashes.

You can add or remove laundry within end time. Displayed time is the sum of normal drying time and end time. End Time LED turns off atthe end of countdown, the drying starts and the drying LED turns on.

Changing the end time

If you want to change the duration during the countdown:

Pause the program and Turn the On/Off/ Program Selection button and cancel the program. Select the desired program and repeat the End Time selection. Cancelling the end time function If you want to cancel the end time countdown and start the program immediately: Pause the program and Turn the On/Off/ Program Selection button and cancel the program. Select the desired program and press the “Start/Pause” button.

Drum Light

You can turn on and off the drum light by pressing this button. The light turns on when the button is pressed and turns off after certaintime.

Express Dry / RapiDry

This application is available for all programmes highlighted with dark colour on the control panel.

Quick button is used to activate.

For example in case of “wardrobe ready for cotton” the usual programme duration is 3:29, the RapiDry feature reduces the required time to 2:30.

Warning indicators

Warning indicators may vary depending on the model of your drying machine.

Filter cleaning

When the program is completed, the warning indicator for filter cleaning turns on.

Water tank

If the water tank fills up while the program continues, the warning indicator starts flashing and the machine goes into stand-by. In this case, empty the water tank and start the program by pressing the Start / Stand-by button. Warning indicator turns off and program resumes.

Cleaning of filter drawer/ heat exchanger

Warning symbol flashes periodically to remindthat filter drawer must be cleaned.

Starting the program

Press the Start/Stand-by button to start the program. Start/Stand-by and Drying indicators turn on to show that program started.

Child Lock

The drying machine has a child lock which prevents the program flow from being interrupted when the buttons are pressed during a program. When the Child Lock is activated, all buttons on the panel except the On/Off/Program Selection button are deactivated.Press the Audible Warning button for 3 seconds in order to activate the child lock.The child lock has to be deactivated to be able to start a new program after the currentprogram is finished or to be able to interfere with the program. To deactivate the child lock,keep the same buttons pressed for 3 seconds.

When the child lock is activated, the child lock warning indicator o the screen turns on.

When the child lock is active : The drying machine runs, or in stand-by statethe indicator symbols will not change upon changing the position of the program selectionbutton.

When the drying machine is operated and the child lock is active, if the program selection button is turned, a double beeping noise will be heard. If the child lock is deactivated before the program selection button is turned to its original place, the program will be terminated since the programselection button is displaced.

Changing the program after it is started

You can change the program you selected to dry your laundry with a different program after the drying machine starts running.

For example, Pause the program and turn the On/Off/Program Selection button to select the Extra Dry program in order to select the Extra Dry program instead of Ironing Dryness.
Press the Start/Stand-by button to start the program.

Adding and removing clothes during stand-by

If you want to add or remove clothes to/from the drying machine after the drying programstarts:

Press the Start/Stand-by button to put the drying machine in Stand-by state. The drying operation stops.
Open the loading door while in Standby state, and close the door after you remove or add laundry.
Press the Start/Stand-by button to start the program. Adding laundry after the drying operation starts may cause the dried laundry inside the drying machine to mix with wet laundry and leave the laundry damp at the end of operation.

Adding or removing laundry during drying may be repeated as many times as you wish. But this operation continuously interrupts the drying operation, and thus increases program duration and energy consumption. So, it is recommended to add laundry before the program starts. If a new program is selected byturning the program selection button while the drying machine isin stand- by, the running program terminates.

Do not touch the inner surface of the drum while adding or removing clothes during a continuing program. The drum surface is hot.

Cancelling the program

If you want to cancel the program and terminate the drying operation for any reason after the drying machine starts running, Pause the program and turn the On/Off/Program Selection button; the program terminates.

The inside of the drying machine shall be extremely hot when you cancel the program during machine operation, so run the refreshingprogram to allow it to cool down.

End of program

When the program ends, the LED’s of End/ Wrinkle Prevention and Fibre Filter Cleaning Warning on the program follow-up indicator turn on. Loading door can be opened and drying machine is ready for another operation. Turn the On/Off/Program Selection button to On/Off position in order to turn off the drying machine.

If the Wrinkle Prevention mode is active and the laundry is not removed after the program is completed, the wrinkle prevention function activates for 2 hours toprevent the laundry inside themachine to get wrinkled. The program tumbles the laundry with 10-minute intervals to prevent them from wrinkling.

Odour feature

If your drying machine has odour feature, read the ProScent manual to use this feature.

General Description of Steam Programs

Steam cycles

You may use the steam function in cycles that are marked with a blue/red line in your machine panel. It is necessary to to use the dryer grouping your clothes depending on their types and thicknesses when you use a cycle with the steam function active. Do not dry wool, leather, or clothes that contain metal parts in this cycle. Extra noise may be generated during steam generation in steam cycles. Depending on the type, amount of laundry and the selected cycle, the result of wrinkle release and odour removal processes may differ. Upon completion of steam cycles, laundry should be immediately extracted from the machine and hung on ahanger.

Getting the machine ready

Steam tank must be filled before the initial use of the steam functioned cycles. Therefore, when using the machine for the first time, it is required to dry laundry using a steamfunctioned cycle or a cycle with the steam function inactive.

How to activate the steam cycle:

When you turn on the machine and the rotate the cycle navigator to the ‘Ready to Wear’ or ‘Steam Refresh’ cycles, the indicator shown on the image below will turn on. This symbol indicates that you can run the drying cycle with a maximum load of 1.5 kg (6 pieces). To be able to dry 1 piece or 3 pieces of laundry, you need to tap the ‘Steam’ option on the screen to make the required adjustment in loading level settings.

Once you have made the required adjustments, you may start the cycle by pressing the Start/ Hold button.

You will need to tap on the ‘Steam’ option on the screen to be able to activate the steam function in Blend, Jeans, Cotton, Economic Cotton, and Synthetic cycles. When you tap this button, steam function will be activated, the symbol shown below will be displayed and the cycle duration will change.

You may start the cycle by pressing the Start/Hold button when you see the symbol displayed and the steam function is activated.
If the steam tank is empty, the icon shown below will blink. It is required to dry laundry in a cycle with the steam function inactive to fill thetank.

HomeWhiz Function

Firstly, the homewhiz application should be installed on your phone. The detailed information regarding the homewhiz application is available on https://www.homewhiz.com/ Turn on the bluetooth on your phone.

Switch the product to off mode using the On/Off switch. Perform the following actions using the application on your mobile device. Devices->Add Device->Cleaning Devices-Dryer

Scan or type the product barcode into the app.
Continue with the installation according to the app instructions on your mobile device.
Press the “On” and “Off” and Remote Control buttons on your device simultaneously for 3 seconds according to the app instructions. The screen displays 3-2-1 and the following image appears.

The product screen is closed after the installation is completed and in the application, it is asked to select the room where the product will be added.

Using the remote connection

Switch the product to Download program mode, observe that the Wifi icon is illuminated if the Wifi is turned on in the product. If the Wifi is off and the icon is not illuminated, press the remote control key for 3 seconds to turn on the Wifi. Press the remote control key to allow remote control to the product while the Wifi is turned on.

The product can be controlled remotely by entering the homewhiz application while the remote control is active The detailed information regarding the homewhiz application is available on https://www.homewhiz.com/

Deleting the product from network

When the time delay and Wifi buttons are pressed for 5 seconds while the product is on, it counts down from 5 on the screen and when the beep is heard, the product is deleted from network and the Wifi is turned off.

The remote control is cancelled when the door is opened.
The remote control is cancelled when the program button is turned
If the Wifi icon is illuminated continuously, it means that it is active and connected to network
If the Wifi icon is flashing continuously, it means that it is active and trying to connect to network. You cannot connect to the product unless it is illuminated continuously
The connection to the product is allowed if the remote control icon is active and the Wifi icon is illuminated continuously.

beko-B5T64237WM-Dryer-fig36

Apple App Store for the devices with IOS operating system

beko-B5T64237WM-Dryer-fig36

Google Play Store for the devices with Android operating system

Getting the Homewhiz Application

You can get the Homewhiz application from the application stores of your device. You can use the below QR codes to access the applications faster.

Maintenance and cleaning

Read the “Safety Instructions” first!

Lint filters (internal and external filters) / Cleaning of the Interior Surface of the Loading Door
The hair and fibres that are separated from the laundry during drying process is collected by the Lint filter.

WARNING

After each drying cycle, clean the lint filter and the inner surface of the loading door.

NOTICE

Your drying machine has 2 lint filters with one placed inside the other. Do not operate the product without the lint filters.

To clean the lint filter:

Open the loading door.
Hold the first part (inner filter) of the two part lint filter and remove it by pulling it upwards.
Remove the second part (outer filter) by pulling it upwards.
Ensure that hair, fibre and cottonballs do not fall into the slot wherethe filters are installed.

beko-B5T64237WM-Dryer-fig39

Open both of the lint filters (outer and inner) and remove the fibres with your hands or with the brush on the air deflector. You can clean the hair in the filters with a vacuumcleaner.
Clean both filters under water running in reverse direction of fibre accumulationor with a soft brush. Dry the filter beforeplacing it back.
Insert the lint filters on one another and place it back in its place.
Clean the inner surface of the loading door and the gasket with a soft damp cloth or thebrush on the air deflector.

Cleaning the sensor

The drying machine has humidity sensors that detect whether the laundry is dry. To clean the sensors:
Open the drying machine loading door.If the machine is hot due to drying operation,wait until it cools.
Clean the metal surfaces of the sensor with asoft cloth dampened with vinegar and then dry.
Clean the metal surfaces of the sensor 4 times a year. Do not use metal tools to clean the sensors’ metal surfaces.
Due to fire and explosion hazard, do not use solutions, cleaning materials or similar tools to clean sensors.

Emptying the water tank

During drying, the moisture is removed from the laundry and condensed, then the water is accumulated in the water tank. Empty the water tank after each drying session. Condensed water is not potable water!
Do not remove the water tank as a program is running!
If you do not empty the water tank, during the
next drying sessions the machine will stop operating due to the water tank being full and a Water Tank warning icon will blink. In this case empty the water tank and to continue drying operation, press the Start / Stand-by button.
To drain the water tank: Pull the water tank out from its drawer carefully. Drain the water in the tank.Remove the water tank in the drawer or the kickplate carefully.
If fibre is accumulated in the funnel on the water tank, remove it under running water. Place back the water tank.
If direct discharge option is used, water tank is not required to be drained.

Cleaning the condenser

The hair and the fibre that are not collected by the lint filter accumulates on the metal surface of the condenser behind the air deflector. These fibres shall be cleaned regularly.If the condenser cleaning icon blinks, check the metal surface. If there is any fibre, clean it. It must be checked at least every 6 months.

Open the toe board by pulling its button.

Move the latches to open the air deflector lid.

Pull the brush to the left to remove it. You can use the cleaning brush to cleanfilter, condensing metal surface and accumulated fibre on the door.

The cleaning brush is inside the documentation bag. Get your brush from the documentation bag and insert it to its place on the airdeflector to store it.

Clean the fibre on the metal surface of the condenser with damp cloth or the brush onthe air deflector in up – down direction. Do not clean with left – right direction since it will damage the metal plates of the condenser.
You can use a vacuum cleaner with a brush for cleaning. If the vacuum cleaner does not have a brush, it is not recommended to be used for condenser cleaning.
After cleaning the filter, door and the condenser, drag the brush to the right and lock it in its place.
After the cleaning process is completed, place the air deflector cover to its place, move the latches to close it and close thetoe board.

You can clean by hand, provided you wear protective gloves. Do not try to clean with bare hands. The condenser fins may damage yourhands. Cleaning from left to right may damage the condenser fins.This may lead to drying issues.

When the air deflector cover is removed, it is normal to have water at the plastic section in front of the condenser.

If you see fibre accumulation on the fan cover and the toe board, remove with acloth.

Do not have weight on the toe board when it is open.

NOTICE : Do not use abrasive materials or steel wool to clean the drum.

Troubleshooting

The drying operation takes too long.

Fibre filter (interior and exterior filters) pores may be clogged. >>> Wash the fibre filters with warm water and dry them
The front side of the condenser may be clogged. >>> Clean the front side of the condenser.
The ventilation grills in front of the machine may be closed. >>> Remove any object in front of the ventilation grills that blocks ventilation.
Ventilation may be insufficient due to the very small area where the machine is installed. >>> Open the door or windows to prevent the room temperature from rising too much.
If there is a humidity sensor;
Limescale may have accumulated on the humidity sensor. >>> Clean the humidity sensor.
The machine may be overloaded with laundry. >>> Do not load the drying machine excessively.
The laundry may not have been spun enough.. >>> Spin at a higher speed in the washing machine.

The laundry comes out damp after drying.

The program suitable for the laundry type may not be used. >>> Check the care labels on the laundry and select a program ideal for the kind of laundry or use additional time programs.
Fibre filter (interior and exterior filters) pores may be clogged. >>> Wash the filters with warm water and dry them
The front side of the condenser may be clogged. >>> Clean the front of the condenser.
The machine may be overloaded with laundry. >>> Do not load the drying machine excessively.
The laundry may not have been spun enough.. >>> Spin at a higher speed in the washing machine.

The dryer does not turn on, or the program cannot be started. The dryer does not turn on when set.

The power plug may not be plugged in. >>> Make sure the power plug is plugged in.
The loading door may be left open. >>> Make sure that the loading door is properly closed.
The program may not have been set or the Start / Pause button may not have been pressed. >>> Make sure that the program is set and it is not in Standby position.
Child lock may be activated. >>> Turn off the child lock.

The program was interrupted for no reason.

Loading door might not be closed properly. >>> Make sure that the loading door is properly closed.
There might be a power outage. >>> Press the Start / Standby / Cancel button to start the program.
Water tank may be full. >>> Empty the water tank.

Laundry shrunk, matted or spoiled.

The program suitable for the type of laundry may not have been used. >>> Select a program suitable for the type of laundry by checking the care labels on the laundry.

Water is flowing from the loading door.

Fibres might have gathered on the inner surfaces of the loading door and on the surfaces of the loading door gasket.

Clean the inner surfaces of the loading door and the loading door gasket surfaces.

The loading door opens by itself.

The loading door might not be closed properly. >>> Push the loading door until the closing sound is heard.

The water tank warning symbol is on/flashing.

The lighting inside the drying machine does not turn on (in models with lamps).

The drying machine might not have been turned on by the On/Off button. >>> Check that the drying machine is turned on.
Lamp might be broken. >>> Contact Authorized Service to replace the lamp.

Anti-Wrinkle icon or light is lit.

An anti-wrinkle program that prevents the laundry in the dryer from creasing may be activated. >>> Turn the dryer off and remove the laundry.

The fibre filter cleaning icon is lit.

Fibre filters (interior and exterior filters) may be unclean. >>> Wash the filters with warm water and dry them.
A layer may be formed in the fibre filter pores, leading to clogging. >>> Wash the filters with warm water and dry them.
A layer may be formed in the fibre filter (internal and external filters) pores that leads to clogging.<>
Fibre filters may not be in place. >>> Insert the interior and exterior filters into their places.
Eco-friendly filter cloth may not be installed on the plastic part, and the front of the condenser may have clogged.>>>Install the eco–friendly filter to the plastic part and place it on the filter housing.
Eco-friendly filters may not have been replaced, although the warning symbol is illuminated. “Replace your filter.”

An audible warning is heard from the machine

Fibre filters may not be in place. >>> Insert the interior and exterior filters into their places.
Filters of the machine may not have been installed.>>> Install the fibre filters (internal and external) or the environmentally-friendly filter to their housing.

The condenser warning icon is flashing.

Condenser front may be clogged with fibres. >>> Clean the front of the condenser.
Fibre filters may not be place. >>> Insert the interior and exterior filters into their places.

The lighting inside the drying machine turns on (in models with lamps).

If the drying machine is plugged into the power outlet, the On/Off button is pressed, and the door is open; the light
turns on. >>> Unplug the dryer or turn the On/Off switch to the off position.

Wi-Fi icon flashes continuously. (HomeWhiz Function models)

The product may not be connected to the wireless network. Follow the instructions to connect to the network.
The appliance which the product utilizes to connect to network may be faulty. Check it. The product may not be connected to the network due to the proximity.

Check the steps below if you see “F L t” on the screen.

The filters may be dirty. >>> Clean the inner and outer filters or replace the eco-friendly filter.
In the cover area, if you are using the inner and outer dual filters. >>> Make sure that both filters are installed.
If you use the eco-friendly filter feature, make sure the filter cloth is attached to the plastic part. >>>Insert the filter cloth into the plastic part if it is not inserted.
The front side of the condenser may be dirty. >>> Open and check the kick zone and make sure it is clean. Check out the Maintenance and Cleaning section.

WARNING !

If the problem persists after following the instructions in this section, contact your vendor or an Authorized Service. Never attempt to repair a malfunctioning product yourself.

NOTE!

If you experience a problem with any part of your device, you can request a replacement by consulting the nearest authorised service with the appliance model number.
Operating the device with non-original parts may cause malfunction of the appliance.
The manufacturer and distributor are not responsible for malfunctions caused by non-original parts.

PRODUCT FICHE

PRODUCT FICHE

Complying Commission Delegated Regulation (EU) No 392/2012
Supplier name or trademark| BEKO
Model name| B5T64237WM 7188241560
Rated capacity (kg)| 10.0

Type of Tumble Dryer

Type of Control

| Automatic|
Non-automatic| –
Energy consumption of the standard cotton programme at full load (kWh)|

2,45

Energy consumption of the standard cotton programme at partial load (kWh)| 1,20

Power consumption of the off-mode for the standart cotton programme at full load, PO (W)

|

0,50

Power consumption of the left-on mode for the standart cotton programme at full load, PL (W)

|

1,00

The duration of the left on mode (min)| 30
Standard cotton programme (3)|
Programme time of the standard cotton programme at full load, Tdry (min)| 239
Programme time of the standard cotton programme at partial load, Tdry1/2 (min)| 130
Weighted programme time of the standard cotton programme at full and partial load (T t)| 177
Condensation efficiency class (4)| A
Average condensation efficiency of the standard cotton programme at full load, Cdry| 91%
Average condensation efficiency of the standard cotton programme at partial load, Cdry1/2| 91%

Weighted condensation efficiency of the standard cotton programme at full load and partial load, Ct

|

91%

Sound power level for the standard cotton programme at full load (5)| 64
Built-in| –

: Yes – : No

Scale from A+++ (most efficient) to D (least efficient)
Energy consumption based on 160 drying cycles of the standard cotton programme at full and partial load, and the consumption of the low-power modes. Actual energy consumption per cycle will depend on how the appliance is used.
“Cotton cupboard dry programme” used at full and partial load is the standard drying programme to which the information in the label and the fiche relates, that this programme is suitable for drying normal wet cotton laundry and that it is the most efficient programme in terms of energy consumption for cotton
Scale from G (lest efficient) to A (most efficient)
Weighted average value — L WA expressed in dB(A) re 1 pW