JBC NAS Stand for NH High Precision Heater Hose Set Instruction Manual
- June 16, 2024
- JBC
Table of Contents
JBC NAS Stand for NH High Precision Heater Hose Set
Specifications
- Product Name: NAS Stand for NH High-Precision Heater Hose Set
- Model: NA-SB
- Included Items:
- NAS Stand for NH High-Precision Heater Hose Set – 1 unit
- Manual – 1 unit (Ref. 0032351 2)
- Features:
- JNA High-Precision Hot Air Control Unit
- Stand Cable Cartridge Holder
- Cartridge Exchanger
- Adjustable Tool Holder (sold separately)
- Compatible Cartridges: NH works with J125 and J325 Cartridge Ranges. Find the model that best suits your soldering needs at www.jbctools.com.
- Safety Standards: Complies with CE standards. ESD Safe.
- Warranty: JBC’s 2-year warranty covers this equipment against all manufacturing defects, including the replacement of defective parts and labor. Warranty does not cover product wear or misuse. In order for the warranty to be valid, equipment must be returned, postage paid, to the dealer where it was purchased.
Product Usage Instructions
Changing Cartridges
To save time and change the cartridge safely without switching the station off, follow these steps:
Removing:
- Place the cartridge in the extractor.
- Pull the handle to remove it.
- Use the ring (J325) or umbrella (J125) around the cartridge as a stop to extract it from the tool.
Inserting:
- Place the handpiece on top of the new cartridge.
- Press down slightly to insert it.
Fixing:
- Push against the holes to fix the cartridge (1).
- The extractor opening also allows correcting the nozzle angle of curved cartridges. To do this, rotate the tool (2) with the cartridge inserted in the extractor until the nozzle is in the proper position.
Important: It is essential to insert the cartridge up to the mark for a proper connection.
Maintenance
Before carrying out maintenance or storage, always unplug the stand from the station and the tool. Follow these maintenance instructions:
- Use a damp cloth to clean the stand. Alcohol can be used only when cleaning the metal parts.
- Check periodically that the metal parts of the tool/stand are clean so that the station can check the tool’s status.
- Periodically check all cables and tube connections.
- Replace any defective or damaged parts. Use original JBC spare parts only.
- Repairs should only be performed by a JBC authorized technical service.
Clean the stand periodically to ensure proper functioning.
Safety
To ensure safety and prevent electric shock, injury, fire, or explosion, follow these guidelines:
- Do not use the stands for any purpose other than soldering or rework.
- The power cord must be plugged into approved bases. Be sure that it is properly grounded before use. When unplugging it, hold the plug, not the wire.
- The tool should be placed in the stand when it is not in use to activate the sleep mode.
FAQ
Q: What cartridges are compatible with the NAS Stand for NH High-Precision Heater Hose Set?
A: The NAS Stand for NH High-Precision Heater Hose Set is compatible with J125 and J325 Cartridge Ranges. You can find the model that best suits your soldering needs at www.jbctools.com.
Q: What is the warranty coverage for the NAS Stand for NH High-Precision Heater Hose Set?
A: The NAS Stand for NH High-Precision Heater Hose Set is covered by JBC’s 2-year warranty, which includes the replacement of defective parts and labor. Please note that the warranty does not cover product wear or misuse. To validate the warranty, the equipment must be returned, postage paid, to the dealer where it was purchased.
This manual corresponds to the following references:
NA-SB
Packing List
The following items are included:
Stand for NH High-Precision Heater Hose Set ……………………………………………………………………. 1 unit
Manual …………………………………………………………………………………………………………………………………………. 1 unit
Ref. 0032351
Features and Connections
Changing Cartridges
Save time and change the cartridge safely without switching the station off.
-
Removing
Place the cartridge in the extractor and pull the handle to remove it. Use the ring (J325) or umbrella (J125) around the cartridge as a stop to extract it from the tool. -
Inserting
Place the handpiece on top of the new cartridge and press down slightly. -
Fixing
Push against the holes to fix the cartridge (1). The extractor opening also allows correcting the nozzle angle of curved cartridges. To do this, rotate the tool (2) with the cartridge inserted in the extractor until the nozzle is in the proper position.
*Important
It is essential to insert the cartridge up to the mark for a proper
connection.
Compatible Cartridges
NH works with J125 and J325 Cartridge Ranges. Find the model that best suits your soldering needs at www.jbctools.com.
Maintenance
- Before carrying out maintenance or storage, always unplug the stand from the station and the tool.
- Use a damp cloth to clean the stand. Alcohol can be used only when cleaning the metal parts.
- Check periodically that the metal parts of the tool/stand are clean so that the station can check the tool’s status.
- Periodically check all cables and tube connections.
- Replace any defective or damaged parts. Use original JBC spare parts only.
- Repairs should only be performed by a JBC authorized technical service.
Safety
It is imperative to follow safety guidelines to prevent electric shock, injury, fire or explosion.
- Do not use the stands for any purpose other than soldering or rework.
- The power cord must be plugged into approved bases. Be sure that it is properly grounded before use. When unplugging it, hold the plug, not the wire.
- The tool should be placed in the stand when is not in use in order to activate the sleep mode. The soldering tip, the metal part of the tool and the stand may still be hot even when the station is turned off. Handle with care, including when adjusting the stand position.
- Avoid the contact of flux with skin or eyes to prevent irritation.
- Be careful with the fumes produced when soldering.
- Keep your workplace clean and tidy. Wear appropriate protection glasses and gloves when working to avoid personal harm.
- Utmost care must be taken with liquid tin waste which can cause burns.
- This appliance can be used by children over the age of eight and also persons with reduced physical, sensory or mental capabilities or lack of experience provided that they have been given adequate supervision or instruction concerning use of the appliance and understand the hazards involved. Children must not play with the appliance.
- Maintenance must not be carried out by children unless supervised.
Specifications
NAS
Stand for NH High-Precision Heater Hose Set Ref.: NA-SB
- Includes: Automatic “Tool-In-Stand-Detection”
- Net Weight: 1.256 kg / 2.77 lb
- Total Package Dimensions/Weight: 342 x 155 x 120 mm / 1.728 kg (L x W x H) 13.46 x 6.10 x 4.72 in / 3.81 lb
- Complies with CE standards. ESD Safe.
Warranty
JBC’s 2 year warranty covers this equipment against all manufacturing defects,
including the replacement of defective parts and labour.
Warranty does not cover product wear or misuse. In order for the warranty to
be valid, equipment must be returned, postage paid, to the dealer where it was
purchased.
This product should not be thrown in the garbage.
In accordance with the European directive 2012/19/EU, electronic equipment at
the end of its life must be collected and returned to an authorized recycling
facility.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>