autopot Pot Divider 2.2 gal pot Watering Systems User Guide
- June 16, 2024
- AutoPot
Table of Contents
**autopot Pot Divider 2.2 gal pot Watering Systems User Guide
**
INSTRUCTION
Fits 8.5 L / 2.2 gal & 15 L / 3.9 gal pots as used in 1Pot & easy2grow modules (easy2grow pictured above)
Fits 8.5 L / 2.2 gal & 15 L / 3.9 gal pots as used in Auto8 modules (pictured above)
COMPATIBLE WITH:
- AutoPot 8.5 L / 2.2 gal Pots
- AutoPot 15 L / 3.9 gal Pots
POTS AS USED IN:
- easy2grow Modules
- Auto8 Modules
- 1Pot Modules
CONTENTS
-
1x PotDivider Base
-
1x Bottom Divider
-
1x Top Divider
-
Prepare your pots with root control as usual. Put marix or root control discs (not supplied) into your 8.5L / 2.2 gal or 15 L / 3.9 gal pots (not supplied).
-
To assemble PotDivider take the Bottom Divider (see Contents above) and slide into the guide on the Base.
-
Take the Top Divider (see Contents above) and slot down into the slot in the Bottom Divider using the guides to create a cross-shape.
-
Place the assembled PotDivider into your 8.5 L / 2.2 gal or 15 L / 3.9 gal pot.
-
Pour a small amount of medium into each section of the PotDivider (5a). Push the medium down through holes in the Base (5b) – this is essential for capillary action to occur.
-
Fill pots with medium and pot up plants. Water through pots and allow to drain outside the tray. Once drained place pots into your module trays.