MIDIPLUS TITAN Q6 USB Audio Interface with LED Level Meter User Guide
- June 16, 2024
- Midiplus
Table of Contents
MIDIPLUS TITAN Q6 USB Audio Interface with LED Level Meter User Guide
Introduction
Thank you for choosing TITAN Q6. TITAN Q6 is a 14 in 16 out USB audio
interface,
with LED Level Meter, quick select button, multi-function control encoder,
USB-A and USB-C hub, OTG port and 3.5mm phone jack, providing you with a high-
quality experience. To fully utilize the features of TITAN 6, we recommend you
install the
TITAN driver. Which is compatible with Windows 10 or later and Mac 0S 10.14
Mojave and later operate system. Please read this manual before you start
using, to help you quickly understand the basic operations and features of
TITAN Q6.
Features
-
14in160ut (4x6Analog1/0, 10x 10 Digital /0)
-
24-bit/192kHz audio resolution
-
TwoXLR/TRS combo inputs with independent 48V control and gain
control Main output can be set as balanced or unbalanced Variable Impedance Technology Headphone output for different impedance headphone High performance/low power mode for different usage scenarios Independent input/output metering for real-time level observation TG port with power supply for charging mobile devices
USB Hub included USB-A and USB-C ports for connecting MIDI keyboard and other devices -
Bidirectional synchronization of software and hardware ® USBType-C
-
Aluminum alloy housing
Hardware Features
-
XLR/TRS combo input: Connect microphone vi Main out
-
Connect to your monitor XLR or connect your instrument (electric guitar) and line level device via the 1/4″TRS . Opticall/
-
Supports ADAT or S/PDIF format USB port
-
Connect to computer . DCIn: 12V/2ADC input . Power switch: Turn on/off the power
-
XLR/TRS combo input: Connect microphone vi Main out: Connect to your monitor XLR or connect your instrument (electric guitar) and line level device via the 1/4″TRS . Opticall/0: Supports ADAT or S/PDIF format USB port
-
Connect to computer . DCIn: 12V/2ADC input . Power switch: Turn on/off the powerount Oune P e onowan Qo
48V status: Indicate the 48V phantom power status Input selected: Indicate the selected input channel 1/0 level meter -
Display the selected 1/0 channel level Output selected: Indicate the selected output channel Input select button:
-
Select the input channel that you want to control.2. When theinput 1 orinput 2 is selected, press and hold for 3 seconds to turn on/turn off the current channel’s 48V Output select button
-
Select the output channel that you want to control2. When theinput 1 orinput 2 is selected, press and hold for 3 seconds to turn on/turn off the current channel’s INST RGB lamp ring: Indicate the control value of selected /0 channel Encoder: Control the input gain or output level
-
Headphone outputs: 6.35mm & 3.5mm stereo output, connect to your headphone
-
OTG port: Connect to your mobile phone via the Type-C cable
-
PHONE jack: Connect to your mobile phone via the 3.5mm TRRS cable
-
USBHUB: USB-A& USB-C port, connect your MIDI keyboard and other device
Start Using
-
.Connecting Connect the TITAN Q6 to computer by using the included USB cable and
DCcable -
Installation
Go to http://midiplus.com/support.aspx?id=1 download and install the TITAN Q6 driver -
Setting the default sound device Windows: Go to Settings>System>Sound and then selecting the TITAN Q6 asyour device for Input and Output macOs: Go to System preferences>Sound and then selectinghe TITAN Q6 asyour device for Inputand Output
-
Connection Example
