ALPINE X121-12EV 2 Way Component Speaker System Instruction Manual
- June 16, 2024
- Alpine
Table of Contents
ALPINE X121-12EV 2 Way Component Speaker System
Product Information
Specifications
- Woofer: 6.5″ (165mm) Woven carbon fibre cone
- Tweeter: 1″ (25mm) Tetoron soft-dome
- Single body diameter: Woofer – 165mm, Tweeter – 41mm
- Alto screw hole spacing: 1 – 132mm, 2 – 169mm
- Installation diameter: Woofer – 196mm, Tweeter – 46mm
- Installation depth/plug-in installation: Woofer – 30mm, Tweeter – 2.3mm
- Installation height: Woofer – 42mm, Tweeter – 15.7mm
- Unit weight: Woofer – 959g, Tweeter – 52g
- Maximum rated power (RMS): 50W
- Maximum peak power (Peak): 200W
- Impedance: 4Ohm
- Sensitivity: 89dB SPL (1W @ 1m)
- Frequency response: 65Hz – 20kHz
- Resonance frequency: 65Hz
Product Usage Instructions
Precautions
Prohibited Actions:
- Do not perform any actions indicated as prohibited.
- Do not disassemble the product.
Mandatory Actions:
- Perform any actions indicated as mandatory.
Warning:
- If you encounter any problems with the product, stop using it immediately.
- Continued use may result in personal injury or product damage.
- Contact the authorized Alpine dealer or nearby Alpine service center for repair.
Caution:
- Only use the product with 12V negative-grounded vehicles.
- Using the product with other types of vehicles may cause fire or electrical hazards.
- Contact a professional for wiring and installation.
- Do not disassemble or refit the product.
- Keep small items like bolts or screws out of the reach of children. Ingestion may result in serious injury.
Driving Safety:
- Avoid using any functions that may distract you while driving.
- Use device functions only when the vehicle is completely stopped in a safe area.
- Maintain the volume at a level that allows outside noise to remain audible.
- Not hearing emergency vehicle alarms or road warning signals may result in an accident.
- Excessively loud volume may cause permanent hearing damage or loss.
Product Maintenance
To clean the product, regularly wipe it with a soft, dry cloth. For tough stains, dampen the cloth with water only. Do not use solvents as they may dissolve the product.
Installation
This product is specially designed for Tesla cars and is not suitable for other vehicles. Please contact the dealer from whom you bought the product to safely install it. Professional expertise is required for wiring and installation.
Repair
In case of any problems, do not attempt to repair the product yourself. Return it to the authorized Alpine dealer or Alpine service center for repair.
FAQ
Q: Can I use this speaker system with other vehicles?
A: No, this speaker system is specially designed for Tesla cars and is not suitable for other vehicles.
Q: What should I do if I encounter problems with the product?
A: If you encounter any problems, please stop using the product immediately. Continued use may result in personal injury or product damage. Please return the product to the authorized Alpine dealer or nearby Alpine service center for repair.
Q: Can I disassemble or refit the product?
A: No, disassembling or refitting the product may result in product damage, fire, or electrical hazards. Please do not attempt to disassemble or refit it.
For iPhone users, please search “Alpine Music” in APP Store to download and install the tuning software; for Android users, please scan the QR code on the right to download and install the software directly.
Operation Instructions
Types of Precautions
-
Prohibited
Indicates a prohibited action (must not be performed). -
Prohibited
Indicates that disassembly is prohibited. -
Mandatory
Indicates a mandatory operation (must be performed). -
Indicates that it should draw your close attention.
Warning
-
In case of problems, please stop using the device immediately.
Continued use may result in personal injury or damage to the product. Please return the product to the authorised Alpine dealer or nearby Alpine service center for repair. -
The product is only suitable for 12V negative-grounded vehicles.
Use within other types of vehicles may create a fire or electrical hazard. -
Please contact a professional for wiring and installation.
This product requires professional expertise to wire and install. Please contact the dealer from whom you bought the product to install it safely. -
Please do not disassemble or refit.
Doing so may result in product damage, fire or electrical hazard. -
Small items like bolts or screws must be kept out of the reach of children.
If ingested, please seek Immediate medical attention to avoid serious injury. -
Please do NOT use functions that may distract you while driving.
Any device function that may influence your attention must be used only when the vehicle is stopped completely. To use these functions, make sure to stop your vehicle in a safe area first. Otherwise, it may result in an accident. -
While driving, you must maintain ththe volume at a level that allows outside noise to remain audible.
It is very dangerous not to hear an emergency vehicle alarm or road warning signal (such as a railway crossing) and may result in an accident. Moreover, excessively loud volume may create permanent hearing damage or hearing loss.
Caution
-
Product maintainance
Please regularly clean the item with a soft, dry cloth. For tough stains, use only water to dampen the cloth as other solvents may result in dissolution. -
Temperature
Before starting the device, please ensure that the temperature inside the vehicle is between +60°C and -20°C. -
Repair
In the case of a problem, please do not attempt to repair the product yourself. Please return the product to the authorised Alpine dealer or Alpine service center. -
System matching
This product is specially designed for Tesla cars and is not suitable for other vehicles. -
Installation environment
The device cannot be installed at the following locations:- Under direct sunlight or near a source of heat.
- With high humidity or near a source of water.
- Dusty environments.
- Environments with violent vibration.
Components
Specifications
Woofer | 6.5″ (165mm) Woven carbon fibre cone |
---|---|
Tweeter | 1″ (25mm) Tetoron soft-dome |
Single body diameter | Woofer: 165mm Tweeter: 41mm |
Alto screw hole spacing | 1: 132mm |
2: 169mm
Installation diameter| Woofer: 196mm Tweeter: 46mm
Installation depth/plug-in installation| Woofer: 30mm Tweeter: 2.3mm
Installation height| Woofer: 42mm Tweeter: 15.7mm
Unit weight| Woofer: 959g Tweeter: 52g
Maximum rated power (RMS)| 50W
Maximum peak power (Peak)| 200W
Impedance| 4Ohm
Sensitivity| 89dB SPL (1W @ 1m)
Frequency response| 65Hz – 20kHz
Resonance frequency| 65Hz
Product Dimensions
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>