KARTSim 6361999 Virtual Reality Instructions
- June 16, 2024
- KARTSim
Table of Contents
KARTSim 6361999 Virtual Reality
Product Information
Specifications
- Product Name: rFactor2 Graphics Config
- Compatible Platform: PC
- System Requirements:
- – Operating System: Windows 7 or higher
- – Processor: Intel Core i5 or equivalent
- – Memory: 8GB RAM
- – Graphics Card: NVIDIA GeForce GTX 970 or equivalent
- – DirectX: Version 11
- – Storage: 10GB available space
Product Usage Instructions
Step 1: Accessing the Graphics Config
To open the graphics config for rFactor2, follow these steps:
- Open Steam Library by launching the Steam application.
- Locate and click on “rFactor2” in the left sidebar.
- Click the green “Play” button.
Step 2: Selecting Graphics Config
After clicking the “Play” button, you will be presented with three options. Follow the instructions below to select the middle option (Graphics Config):
- From the given options, click on the middle option labeled “Graphics Config”.
Step 3: Configuring Graphics Settings
Once you have accessed the graphics config screen, you can adjust various graphics settings according to your preferences. The screen will provide you with different options and sliders to customize your experience.
Specifications
| Feature | Details |
|---|---|
| Steam VR Installation | Access via Library > VR in Steam App |
| Oculus Rift S Connection | Ensure USB and display port connections |
| Oculus Quest 2 Setup | Link Oculus account with Facebook, verify via email |
| rFactor2 Graphics Config | Navigate to Steam library, select Graphics Config |
| VR Resolution | Single Screen: 1920×1080, Triple Screen: 5760×1080 |
| VR Center Head Position | Option available in Controls under MISC |
Using Virtual Reality
To use Virtual Reality in rFactor 2, you must use Steam VR. To install this, in the Steam App, click Library > VR. Then, on the left hand side, click Steam VR, and then click Install. Follow the instructions on screen, and then run through the Room Scale setup, again following the instructions. This will be done already. If you have any issues connecting your VR headset, please do as follows: Click on oculus and open the software, click on devices and make sure the rift s is connected. If either the USB connection or the display port is not connected, pull out both the cables for the headset put in the USB cable first, wait 10 seconds until the light inside the headset comes on, and then plug in the display port cable. You may have to repeat this process several times, be patient, after each attempt, give the device 3 minutes for the oculus app to configure it. If you have a quest 2 oculus device you will need to link the oculus account with your facebook account it will prompt you to do this. after that you will need to download the oculus app on your phone and it will ask you to pair the headset and phone using a pin it will provide. You can use a fake account for the fb setup if you wish. but you will need to be able to acsess the email it was created with as it will ask you to verify the account to complete the setup.
You will then need to open the graphics config for rfactor2. To do this navigate to steam libary, click on rfactor2 on the left then click the green play button. this will then give you three options. Select the middle option (Graphics Config) you will then get the screen shown below.
Ensure that VR is enabled and Post Effects are disabled, and the resolution is set to 1920×1080 in the Video Options (See Section 2.4). Now just click on the play icon in steam and open rFactor 2. The menus and UI are all in the VR space, but you will need to use mouse and keyboard to navigate. The Rfactor2 menu without the VR on is much easier to use in my opinion. VR is the VR dropdown on HMD or HMD + Mirror (mirror enables your VR to show on TV screen as well as the headset). If you want to go back to single screen mode you must unplug the VR, and disable VR in the ‘Graphics Configuration’ as done before, without the VR, please look below to see the settings without VR. If you have triple screens the resolution with be 5760×1080 and you will need to tick multiview.
You have to change the sound back to the tv, so in the bottom right hand corner of the home screen, click on the speaker, and change it to the TV, you may have you click on the volume slider to check if the sound is coming from the middle tv. It is recommended that you map a button to re-centre your display while driving. To do this, launch rFactor 2, select Options, Controls, then MISC on the right hand side. There should be an option for ‘VR Center Head Position’. Click on it and then press the button you want to assign. You may have to assign seat adjustment keys also to finalise your VR seating position. It should be assigned to the f key by defult.
FAQ
Q: What are the minimum system requirements for using rFactor2 Graphics
Config?
A: The minimum system requirements for using rFactor2 Graphics Config
are:
- Operating System: Windows 7 or higher
- Processor: Intel Core i5 or equivalent
- Memory: 8GB RAM
- Graphics Card: NVIDIA GeForce GTX 970 or equivalent
- DirectX: Version 11
- Storage: 10GB available space
What is rFactor2 Graphics Config?
rFactor2 Graphics Config is a tool that allows you to adjust and optimize the graphics settings for the rFactor2 racing simulation game on your PC.
Can I use rFactor2 Graphics Config on platforms other than PC?
Can I use rFactor2 Graphics Config on platforms other than PC?
Can I use rFactor2 Graphics Config on platforms other than PC?
Go to the Steam App, click on Library > VR, select Steam VR, and click Install. Follow on-screen instructions and Room Scale setup.
What should I do if my Oculus Rift S is not connecting?
Check the USB and display port connections, reconnect the cables, and allow time for the Oculus app to configure the device.
How do I set up my Oculus Quest 2 with rFactor 2?
Link your Oculus account to your Facebook account, download the Oculus app on your phone, pair the devices using the provided pin, and verify the account via email.
How do I access the graphics config for rFactor 2?
In the Steam library, click on rFactor 2, select the green play button, and choose the Graphics Config option.
What are the recommended VR settings for rFactor 2?
Enable VR, disable Post Effects, and set the resolution to 1920x1080 for single screens or 5760x1080 for triple screens.
Enable VR, disable Post Effects, and set the resolution to 1920x1080 for single screens or 5760x1080 for triple screens.
In the game, select Options, Controls, then MISC, and choose 'VR Center Head Position'. Assign it to your preferred key, commonly the F key.