SAN SARU Ring Size User Guide

SAN SARU Ring Size

Product Information

• Specifications:
  • Material: Paper
  • Size: A4

Product Usage Instructions

• Option 1 (Finger Size):
  • Print out the size guide on an A4 sheet, ensuring that the scale is set to 100% in your printing settings.
  • Measure the line on the printout with a ruler to confirm that it is exactly 10 cm (3.937 inches) long.
  • Cut out the sizer along the continuous line using scissors or a cutter.
  • Cut in the centre dashed line of the sizer.
  • Set up the sizer as shown in the picture, with the printed side facing out.
  • Roll the sizer upon itself, pulling it through the cut.
  • Wrap the sizer around the finger from which you want to determine the size, gently pulling the tip until it cannot slide in further. Ensure that your finger is not squeezed.
  • The sizer will indicate your size. If your size falls between two marks, choose the largest one.
  • You have found your ring size!
• Option 2 (Ring Size):
  • Print out the page adjusted to a 100% scale in your printer settings.
  • Measure the line on the printout with a ruler to confirm that it measures exactly 5 cm (1.97 inches).
  • Select a ring that fits you and has the desired size for your San Saru ring.
  • Place your ring on the circles of the ring size chart and find a circle that aligns with the inside edge of your ring without stepping out of the circle’s lines.
  • The circle that fits your ring is your size.
• Option 3 (Ring Sizer without Printer):
  • Select a ring that already fits you and has the desired size for your San Saru ring.
  • Use a ruler to measure the inner diameter of the ring, right in the middle.
  • Compare the diameter measurement with the table provided, which displays measurements in mm and cm.
  • If your measurement falls between two sizes, choose the largest one.
  • If you are unsure, consider using one of the previous options.
  • Once you have determined your size, you have found your perfect size!
• Frequently Asked Questions:
  • Q: What if my measurement falls between two sizes?
  • A: In such cases, always choose the largest size to ensure a comfortable fit.
  • Q: Can I use this ring size finder for other brands?
  • A: Yes, this ring size finder can be used to determine your ring size for any brand.
  • Q: How accurate is this ring-size finder?
  • A: The ring size finder provides accurate measurements when used correctly. However, it is always recommended to try on rings before making a final purchase.
  • Q: Can I resize my San Saru ring if it doesn’t fit?
  • A: It is recommended to consult with a professional jeweller to resize your San Saru ring for the best results.

OPTIONS

OPTION 1 (Finger Size)

Print out the following size guide on an A4 sheet. Make sure the scale on your printing settings is at 100%. To see if the printout is right, measure the following line with a ruler and make sure it is 10 cm (3.937”) long.

1. Cut out this sizer along the edge of the continuous line where the scissors are.
2. Cut in the centre dashed line.
3. You can do this with a cutter or with scissors (very carefully).
4. Set up the sizer as shown in the picture below.
5. Roll the sizer up on itself with the printed side facing out, pulling it through the cut.
6. Wrap the sizer around the finger from which you are willing to know the size, and pull the tip gently until you can no longer slide it in.
7. Your finger should not be squeezed.
8. The sizer will indicate your size. If your size falls between two marks, the right one will always be the largest.
9. You have found your size!
10. If you still want to make sure you got it right, take a look at the two following guides below.

OPTION 2 (Ring Size)

1. Just as for the previous option, print out this page adjusted to a 100% scale in your printer settings.
2. To make sure that the printout is right, measure the following line using a ruler and ensure it measures exactly 5 cm (1.97*).
3. Now take a ring that fits you and which is the size you’d like your San Saru ring to be.
4. Place your ring on the circles of this ring size chart and find a circle that aligns with the inside edge of your ring, without stepping out of the lines of the circle.
5. The ring should fit into the circle as the picture above shows – in that case, you have found your perfect size!

MIDI RINGS

Here you have an example of midi rings

RINGS

OPTION 3 (Ring sizer without printer)

1. Take a ring that already fits you and the size you’d like your San Saru ring to be. You’ll need a ruler, too.
2. Measure the inner diameter of the ring, and right in the middle, like this:
3. Once you know the diameter of your ring, compare it with the table below, which shows you the measurements in mm and in cm.
4. If your measurement falls between two sizes, the right one will always be the largest. If you are not sure with this option, go for the other ones above.
5. And if you are sure, you have already found your perfect size!

MIDI RINGS

RINGS

Documents / Resources

| SAN SARU Ring Size [pdf] User Guide
Ring Size, Size
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>