FUFU GAGA KF390024 Contemporary Modern White Sideboard Instruction Manual
- June 16, 2024
- FUFU GAGA
Table of Contents
FUFU GAGA KF390024 Contemporary Modern White Sideboard
Product Information
- Product Name: Accent Chest
- Version: 12/28/2022
Specifications
- Tools Required: A x 34, B x 34, C x 64, D x 1, E x 8, F x 4, G x 8, H x 8, J x 1, K x 1, L x 12, M x 4, N x 4, O x 2 x 4
Product Usage Instructions
Important Information
- Please read the entire manual before starting to assemble and/or use this product. Follow the manual thoroughly and keep it for further reference.
Avoid Scratches
- To avoid scratching, this furniture should be assembled on a soft layer such as a rug.
Improve Efficiency
- Try to find a partner to install with you, which can speed up the installation efficiency and shorten the time.
Anti-Topple Warning
- Overturned furniture can cause serious or fatal crush injuries.
- To prevent tipping over, be sure to use the wall attachment if not included with this product.
- Please purchase the wall attachment that fits your wall. If unsure, seek professional advice.
- Please read and follow each step of the instructions carefully.
Installation Steps
Step 1: Insert Quickfit Screw (A)
- Insert quickfit screw (A) into plates 7, 10, 3, and 6 with a screwdriver as shown in the diagram.
Step 2: Attach Plate 7 and Leg 19
- Attach plate 7 and leg 19 to plate 3, and turn cam lock (B) in plate 3,19 clockwise to tighten as shown in the diagram.
Step 3: Attach Plate 10 and Leg 20
- Attach plate 10 and leg 20 to plate 6, and turn cam lock (B) in plate 6,20 clockwise to tighten as shown in the diagram.
Step 4: Insert Quickfit Screw (A)
- Insert quickfit screw (A) into plates 8 and 9 as shown in the diagram.
Step 5: Reinforce the Leg and Connect the Side Plates
- Reinforce the leg using part (O) as shown. Connect the two assembled side plates with plate 2, put cam lock (B) into holes in plate 2, and turn clockwise to tighten as shown in the diagram.
Step 6: Fix Leg Support
- Fix leg support 11 to plate 2 using screw (D) as shown in the diagram.
Step 7: Insert Quickfit Screw (A)
- Insert quick-fit screw (A) into plate 2 as shown in the diagram.
Step 8: Attach Plates 4, 14, and 5
- Attach plates 4, 14, and 5 to plate 2, put cam lock (B) into holes in plates 4, 14, and 5, and turn clockwise to tighten as shown in the diagram.
Step 9: Attach Plates 8 and 9
- Attach plate 8 to plate 4, plate 9 to plate 5, put cam lock (B) into holes in plates 4 and 5, and turn clockwise to tighten as shown in the diagram.
Step 10: Slide Back Plate and Insert Part (L)
- Slide back plates 15 and 16 along grooves as shown. Insert part (L) into plates 3,4,5, and 6.
Step 11: Fix Handle and Part (N)
- Fix handle (F) to plates 12 and 13 using screw (E) as shown in the diagram. Fix part (N) to plates 12 and 13 with screw (C) as shown in the diagram.
Frequently Asked Questions
Q: Can I put a TV on this product?
- A: No, it is not recommended to put a TV on this product.
Q: Can children stand, climb, or hang on drawers, doors, or shelves?
- A: No, children should never be allowed to stand, climb, or hang on drawers, doors, or shelves.
Q: Can I open more than one drawer at a time?
- A: No, it is recommended to only open one drawer at a time.
Q: Where should I place the heaviest items?
- A: The heaviest items should be placed in the lowest drawers.
IMPORTANT INFORMATION!
- please read the entire manual before starting to assemble and/or use this product. Follow the manual thoroughly and keep it for further reference.
AVOID SCRATCHES!
- To avoid scratching this furniture should be assembled on a soft layer-could be a rug.
IMPROVE EFFICIENCY!
- Try to find a partner to install with you, which can speed up the installation efficiency and shorten the time.
ANTI-TOPPLE WARNING!
- Overturned furniture can cause serious or fatal crush injuries. To prevent tipping over, be sure to use the wall attachment, if not included with this product. Please purchase the wall attachment that fits your wall.
- If unsure, seek professional advice. Please read and follow each step of the instructions carefully.
IMPORTANT!
- Any product which is assembled using any kind of screw must be re-tightened 2 weeks after assembly, and once every 3 months – to assure stability throughout the lifespan of the product.
- For regular maintenance and cleaning of the product, for the frame, please use a rag dipped in neutral detergent to fully wipe it, and then dry it with a clean rag.
- For glass materials, wipe with a rag dampened with water glass cleaner, and then dry with a dry rag.
- Do not use an electric screwdriver, and do not use too much force when installing, because the board is easy to break.
TOOLS
- When installing, please carefully confirm whether each screw corresponds to the manual, accessories with similar shapes can be distinguished by size
PARTS
WARNING
- Children have died from furniture tip-overs. To reduce the risk of furniture tipover:
- ALWAYS install tip overrestraint provided.
- NEVER put a TV on this product.
- NEVER allow children to stand, climb, or hang on drawers, doors, or shelves.
- NEVER open more than one drawer at a time.
- Place the heaviest items in the lowest drawers.
- This is a permanent label.
- Do not remove it!
INSTALLATION INSTRUCTION
- Insert quickfit screw(A) into plate 7, 10, 3 and 6 with a screwdriver as shown.
- Attach plate 7 and leg 19 to plate 3, and turn cam lock(B) in plate 3,19 clockwise to tighten as shown.
- Attach plate 10 and leg 20 to plate 6, and turn cam lock(B) in plate 6,20 clockwise to tighten as shown.
- Attach plate 10 and leg 20 to plate 6, and turn cam lock(B) in plate 6,20 clockwise to tighten as shown.
- Insert quick-fit screw(A) into plates 8 and 9 as shown.
- Insert quickfit screw(A) into plates 3 and 6 with a screwdriver as shown.
- Connect the two assembled side plates with plate 2, put cam lock(B) into holes in plate 2, and turn clockwise to tighten as shown.
- Fix leg support 11 to plate 2 using screw(D) as shown.
- Insert quickfit screw(A) into plate 2 as shown.
- Attach plates 4,14 and 5 to plate 2, put cam lock(B) into holes in plates 4,14,5, and turn clockwise to tighten as shown.
- Attach plate 8 to plate 4, plate 9 to plate 5, put cam lock(B) into holes in plate 4,5, and turn clockwise to tighten as shown.
- Slide back plates 15 and 16 along grooves as shown.
- Insert part(L) into plates 3,4,5 and 6.
- Fix handle(F) to plates 12 and 13 using screw(E) as shown.
- Fix part(N) to plates 12 and 13 with screw(C) as shown.
- Fix hinge(H) to plates 12 and 13 respectively using screw(C) as shown.
- Fix hinge(H) to plates 12 and 13 respectively using screw(C) as shown.
- Fix door plates 12 and 13 to the unit by fixing the hinge using screw(C) as shown.
- Place shelves 17 and 18 in.
- Insert quickfit screw(A) into plate 1 as shown Fix part(M) to plate 1 with screw(C) as shown.
- Cover plate 1 to the top, put cam lock(B) into holes in plate 3,4,5,6 and turn clockwise to tighten as shown.
- Reinforce the back plate using part(G) as shown.
- Install the anti-tipping device(J) as shown.
WARRANTY
WARRANTY CLAIMS
- There is a 30-day warranty for broken furniture or any other problems that do not work properly. The warranty will start from the date of purchase which must be verified by proof of purchase.
- Before making a claim, we may be able to answer your query, simply call us. Please leave your purchase order number, along with some details of the problem, if you want a replacement part.
- We will arrange it within 48 hours. If there is out of stock, we will reply with a shipping date.
- The product must be used under the instructions provided. For health reasons.
- For other reasons, if the furniture needs to be returned, it must be cleaned dried, and operated within 30 days of receipt.
Type of Warranty Claim
- Failure to follow the furniture instructions will invalidate the warranty. Attention, please.
- Does not include damage during installation, but includes damage during transportation.
Scope of responsibility
- Shall not bear any responsibility for misuse or user damage and/or loss of parts during the installation of furniture.
- After use, the damage and scratches of the furniture are not covered by the warranty.
- The Warranty Relates to All Bought in The US and Covers The Following Areas
- Sheet parts: 1 month from the date of purchase.
- Electrical parts : 1 month from the date of purchase.
RETURNS
CHANGED YOUR MIND AND NEED TO RETURN YOUR ITEM?
PLEASE FOLLOW THE BELOW INSTRUCTIONS:
- If you have purchased and have simply changed your mind, follow the retailer’s instructions for returns.
DEFECTIVE ITEMS
- If your item is defective in any way, i.e. it doesn’t work but you can’t identify why, in the first instance, please call us.
DAMAGED ITEMS
- If you receive an order with obvious shipping damage from the retailer, then we suggest the delivery is refused.
- If the delivery has been accepted and then shipping damage is found, please follow the specific instructions advised by the retailer.
- In all circumstances please save all packaging material and paperwork for the order.
- Please be aware that if you dispose of packaging material or attempt to return the merchandise without contacting the fulfiller, you jeopardize your chances of making a claim, and you may not receive a credit for the return.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>