ASD-LWS12-D12AC-NK ASD LED Indoor Wall Sconce User Manual

LED WALL SCONCE

ASD-LWS12-D12AC-NK ASD LED Indoor Wall Sconce

▶ DESIGN – LED WALL SCONCE has a modern, multipurpose design and a stylish look with efficient lighting. Durable housing resistant to rust and impact provides many years of use. The acrylic lens with a 215° beam angle grants you even light distribution. It is designed to operate on 120V circuits.
▶ COLOR SELECTABLE – You can choose either a 2,700K soft white, 3,000K warm white, 3,500K neutral white, 4,000K cool white, or 5,000K daylight color temperature.
▶ DIMMING – Smooth triac dimming capabilities ranging from 10% to 100% with modern LED dimmers allow you to control the look and feel of your space.
▶ APPLICATION – The LED WALL SCONCE provides bright, yet smooth lighting for your family room, bedroom, hallway, corridor, or any other common area in your living space. This fixture is also Damp Locations rated.
▶ ADVANTAGES – With a lifespan of 54,000 hours, these fixtures are made to last decades under normal operation! ASD provides a 5-year limited warranty along with UL certification to guarantee top quality products and safety!

Catalog number|
---|---
Notes|
Type|

ORDERING INFORMATION

PRODUCT SPECIFICATIONS:

Construction & Materials

Housing| Aluminum
Lens| Acrylic
Finish| Brushed nickel, Black
Weight| 1.4 lb (0.6 kg)
Environmental system
Work environment| Suitable for Damp Locations
Operating temperature| -4℉ to 104℉ (-20℃ to 40℃)
L-70 Life| > 54,000 hrs
Optical system
Luminous flux| 799/834/856/861/855 lm
Color temperature| 5CCT (2,700/3,000/3,500/4,000/5,000 K)
CRI| > 80
Electrical system
Input voltage| 120 V
Max input current| 0.12 A
Inrush current (Action time)| 40 A (0.01 S)
Off state power| 0W
Power consumption| 12W
Power factor| > 0.9
Output voltage| 36 V
Max output current| 0.3 A
Surge protection DM/CM| 2.5 kV / 2.5 kV

Dimming range
10-100%

Regular and voluntary certifications
5-year limited warranty
UL certified E473804

PACKAGE CONTENTS:

INSTALLATION GUIDE

IMPORTANT SAFETY INFORMATION:

Please read all the instructions below before installation.
▶ Make sure that the supply voltage corresponds to the rated product voltage.
▶ The product must be installed by a qualified electrician in accordance with the National Electrical Code and corresponding local codes.
▶ If the product is damaged, do not use it.
WARNING
RISK OF PERSONAL INJURY – READ and follow all WARNINGS and installation instructions. Keep or give to the owner for future reference.
Risk of cuts: Wear gloves to prevent cuts or abrasions when removing from carton, handling, installing, and maintaining this product.
Risk of electric shock: This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.
Risk of Fire: Minimum 194°F supply conductors. Consult a qualified electrician to ensure correct branch circuit conductor.
ASD® assumes no responsibility for claims arising out of improper or careless Installation or handling of this product.

ELECTRICAL SCHEMATIC DIAGRAM:

INSTALLATION STEPS:

1. Unscrew the two fixture screws from both sides of the wall sconce. Remove the mounting plate and attach it to the existing outlet box using two mounting screws.
2. Choose preferred color temperature by adjusting switch position. Connect the wires: Black to Black, White to White, Green to Green. Secure the connection with wire nuts.
3. Fix the wall sconce to the mounting plate using two fixture screws on both sides. Before tightening the screws, align the holes of both the fixture and the mounting plate to ensure a solid fit.

For most up-to-date spec sheets please refer to asd-lighting.com

ASD LIGHTING CORP
E-mail: orders@asd-lighting.com
Web site: www.asd-lighting.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>