Tolifo X-400B Plus LED Photo Video Light User Guide
- June 16, 2024
- Tolifo
Table of Contents
Tolifo X-400B Plus LED Photo Video Light
Warning and Notes
- Please work indoor, keep dry and airy condition.
- please do not let the device be exposed to rain or moisture, to avoid circuit problem.
- Please do not use when the over- rated voltage.
- The body will be a litter hot when working.
- During transportation and installation process, please do not hit against other items, or else it may couse deformation to the lamp shade and damage to the light.
- Please do not directly look at the light bulb with naked eyes when the photographic light on.
- Please do not place the photographic lights in near by such as alcohol or gasoline and other flammable or volatile solvents.
- Please use the dry soft cloth to clean photographic lights. You can wash with a cloth with some neutral detergent to remove the dirt that is difficult to remove, and then dry with a soft cloth.
- To keep the lights out of children’s reach.
- Please do not work when over-current.
- Do not disassemble equipment. Touch the product’s internal part could result in injury. In the event of malfunction, the product should be repaired only by a qualified technician.
- Please cut off power while the light is not necessary.
- Please note the precautions, or could result in injury.
Scan QR Code to Download App – Linklite
Product Information
Thank you for purchasing the bi-color COB (Chip-on-Board) studio Light. Built
with solid aluminium alloy frame, the fifixture provides wide beam spread with
dual color light source. This light fixture is built-in with FX mode that
gives you access to different pre-programmed creative lighting effects.
The light has a wide variable color range from 2700 to 6500K and a high CRI
rating. It features flicker free dimming from 0-100% and while you can make
adjustments locally on the fixture, you can also make them wirelessly with a
separately-available 2.4G remote controller or mobile APP. The studio light
operates on wide range voltage of AC power 100V-240V, it is useful for live
broadcast, video, studio, still life, portrait, streaming, interview lighting,
and more.
Specifications
Model No. | X-400B Plus |
---|---|
O Power Consumption | 400W |
Color Temperature | 2700K-6500K ±200K |
CRI | ≥97 |
Dimmer | 0%-100% |
LED Type | High power COB (Chip on Board) LED |
Special Effects | 12 |
Flash Speed | 1-9 |
App Control | LinkLite |
Remote Control | 99 channels 2.4G wireless remote control |
Remote Control Distance | ≥30M |
DMX 512 | YES (RJ45 interface) |
DC Input | 100-240V~ 50/60Hz / DC36V12A |
Size | 140140353mm |
Product Overview
-
LCD Screen
-
Temp / Bluetooth Reset
Shortly press 2 to check working temperature. / Long press 2 to reset bluetooth connection -
Fan | Channel Select
Short press to switch on or off the cooling fan.
Note : When the cooling fan is switched off, the intensity is allowed to dimmer max to 30%.
Long press to allow the access to 2.4G remote control, wheel the knob 7 to select the address 01 -99. -
FX Mode Select
In the mode of CCT, long press the button 7 to allow access to FX control. Shortly press the knob 7 to switch control of special effects x12, flash speed from 1 to 9, and dimmer from 0 % to 100 %. Wheel the knob 7 to change the number. Long press the button 4 to exist from the FX control.
FX Control ( special effects)
Pulsing / Campfifire / Lightning / Explosion / TV / Candle / Fault Bulb / Breathe / Paparazzi / SOS / Flame / Fade -
Power switch
-
Power Switch
-
Adjustment Knob
In the mode of CCT, shortly press the knob 7 to switch to control between dimmer and color temperature, and wheel the knob 7 to change the color temperature from 2700K to 6500K or change intensity from 0 % to 100 %. -
DC Power Socket
-
AC Power Socket
-
DMX Input | Output
-
Umbrella Socket
-
Tilt Adjusting Knob
-
Yoke
-
16mm (5/8”) Spigot
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To assure continued compliance, any changes or modifications not expressly
approved by the party.
Responsible for compliance could void the user’s authority to operate this
equipment. (Example- use only shielded interface cables when connecting to
computer or peripheral devices).
This equipment complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) This
device must accept any interference received, including interference that may
cause undesired operation.
FCC Radiation Exposure Statement:
The equipment complies with FCC Radiation exposure limits set forth for
uncontrolled enviroment. This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body.
Customer Support
Tolifo (Dongguan) Photographic Equipment Co., Ltd
Factory in china:15 Xibao Rd, Xitou Industrial Park, Xitou Village, Houjie,
Dongguan
Tel(Internatinal):0086-769-8592 4988 8599 9808 Fax:0086-769-8590 5228
www.tolifo.com /
us.tolifo.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>