Tolifo R-S60RGB LED Photo or Video Soft Light Instruction Manual

Manual of LED Soft Light Series

Model No.R-S60RGB

Scan QR Code to Download App – Linklite

Tolifo (Dongguan) Photographic Equipment Co., Ltd
Factory in china: 15 Xibao Rd, Xitou Industrial Park, Xitou Village, Houjie, Dongguan
Tel (Internatinal): 0086-769-8592 4988 8599 9808 Fax：0086-769-8590 5228

TOLIFOLIGHT

: www.tolifo.com / us.tolifo.com

Product Introduction

R-S60RGB is a thin and portable fixture that provides photographers and videographers with a natural and soft continuous light source with broad coverage. This light fixture is built-in with HSI mode that gives you access to literally more than 36000 colors and different pre-programmed creative lighting effects. The light has a wide variable color range from 2700 to 10,000K and a high CRI rating. It features flicker free dimming from 0-100% and while you can make adjustments locally on the fixture, you can also make them wirelessly with a separately-available 2.4G remote controller, DMX console or mobile APP. The moon light operates on either AC power or battery power, it will accept either NP-F batteries or V-mount battery. It is useful for live broadcast, video, studio, still life, portrait, wedding, macro, streaming, interview lighting, and more.

Product Specifications

Overview

(1) Light diffuser
(2) Tilt adjusting knob
(3) 16mm (5/8”) Spigot
(4) Accessory shoe mount
(5) Vents
(6) V-mount battery plate
(7) Battery plate NP-F970 battery plate
(8) MODE
Shortly press MODE button to switch between CCT and HSI control.
In the mode of CCT, long press MODE button allows to change 12 different special effects from F1 to 12.
In the mode of HSI, long press MODE button allows to change another 8 different special effects from F1 to F8

(9) Bluetooth connection when you access to APP control
(10) COLOR / SAT / FX

1. Shortly press MODE button to switch between CCT and HSI control.

2. In the mode of CCT, wheel (10) to change the color temperature from 2700K to 9999K, wheel (14) to change intensity from 14 om 0 % to 100 %.

3. In the mode of CCT, long press MODE button allows (8) to change 12 different special effects from F1 to 12, shortly press (10) to change speed from 1 to 9.
   Pulsing / Campfifire / Lightning / Explosion / TV / Candle / Fault Bulb / Breathe / Paparazzi / SOS / Flame / Fade

4.  In the mode of RGB, wheel (10) to change hue 0-360°, and short press (10) then wheel to change saturation from 0% to 100%. Shotly press (10) goes to the control between hue and saturation. Wheel (14) always changing intensity from 0 % to 100 %.

5. In the mode of HSI, long press MODE button allows (10) to change another 8 different special effects from F1 to F8, shortly press (10) to change speed from 1 to 9.
   Cop Car / Party / Fireworks / Disco / Ambulance / Fire Siren / RGB Loop / Welding

(11) DMX512 input/output

(12) DMX Channel selector button
Rotating (14) to select address

(13) 2.4G remote selector button
Rotating (14) to select address

(14) Dimmer / Channel knob
(15) Power socket

(16) Power switch
“I” for battery power supply, “O” for Power off,
“II” for Adapter power supply

1. The environment should be kept dry and ventilated when using the light.
2. Please do not let the device be exposed to rain or moisture, to avoid circuit problem.
3. Please do not use the light with over- rated voltage.
4. It’s normal the fixture will be a little hot when working.
5. During transportation and installation process, please do not hit against other items, or else it may cause deformation to the lamp shade and damage to the light.
6. Please do not directly look at the light bulb with naked eyes when the light is on.
7. Please do not place the light near by such as alcohol or gasoline and other flammable or volatile solvents.
8. Please use the soft dry cloth to clean the light. You can wash with a cloth with some neutral detergent to remove the dirt that is difficult to remove, and then dry with a soft cloth.
9. Keep the light out of reach from children.
10. Please do not work when over-current.
11. Do not disassemble equipment. Touch the product’s internal part could result in injury. In the event of malfunction, the product should be repaired only by a qualified technician.
12. Please cut off power when the light isn’t used for long time.
13. Please note the precautions, or could result in injury.

Note: The technical data are subject to change without notice.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.

To assure continued compliance, any changes or modifications not expressly approved by the party.
Responsible for compliance could void the user’s authority to operate this equipment. (Example- use only shielded interface cables when connecting to computer or peripheral devices).

This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.

FCC Radiation Exposure Statement:
The equipment complies with FCC Radiation exposure limits set forth for uncontrolled enviroment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>