walmart FRA-D1 Dog Shock Collar for Large Medium Breed User Manual

walmart FRA-D1 Dog Shock Collar for Large Medium Breed User Manual

Important Safety Information

WARNING
Not for use with aggressive dogs. DO NOT use this product if your dog is prone to be aggressive. Aggressive dogs can cause severe injury and even death to their owner and others. If you are unsure whether this product is appropriate for your dog, please consult your veterinarian or a certified trainer.

• For use with dogs over 6 months of age.

• DO NOT use it when the dog or the collaris wet.

• DO NOT press and hold shock or vibrate for more than 10 seconds to avoid physicalor psychological damage to your dog.
  Your dog SHOULD NOT vocalize or panic when receiving stimulation. If this happens, the stimulation level is too high and you need to go back to the previous level and repeat the process.

• DO NOT charge the device near any flammable substances.

• Dog use only. Not for use on children.

• This is not a toy, and should only be operated by a responsible adult.

CAUTION
Not for use with aggressive dogs. DO NOT use this product if your dog is prone to be aggressive. Aggressive dogs can cause severe injury and even death to their owner and others. lf you are unsure whether this product is appropriate for your dog,please consult your veterinarian or a certified trainer. For on- leash training. Do not attach the leash to the training collar. Use a regular collar in addition to the training collar. Risk of skin damage. Please read and follow the instructions this manual. Proper fit of the collar is important. A collar worn for too long or made too tight on the dog’s neck may cause skin damage. Ranging from redness to pressure ulcers; this conditions commonly known as bed sores.

• DO NOT leave the collar on the dog for more than 12 hours per day.
• When possible reposition the collar on the dog’s neck every 1 to 2 hours.
• Check the fit to prevent excessive pressure; follow the instructions in this manual.
• Never connect a lead to the collar; lt will cause excessive pressure onthe contacts.
• Wash the dog’s neck area and the contact probes of the collar weekly with a damp cloth. Examine the contact area daily for signs of a rash or a sore.
• If a rash or sore is found, discontinue use of the collar until the skin has healed. elf the condition persists beyond 48 hours, see your veterinarian.
• The Receiver meets the IP67 waterproof rating, it can be submerged in water up to 1 meter for up to 30 minutes. lf submerged and wet, please don’t use it.
• This product comes with conductive silicone covers, please ensure they are worn on the contact points before putting the Receiver on dour dog and check for the presence of the silicone cover every hour.

What You Get

COMPONENTS

| Transmitter| 1
| Receiver (Including collar)| 1
| Static stimulation test light| 1
| Magnetic charging cable| 1
| Lanyard| 1
| User manual| 1

Function and operation description

.At a glance

channels
⑨| On/Off Button| Press to turn on/off the receiver

Receiver Indicator Light Status

| Red light (Flashing slowly)| Charging
---|---|---
| Steady green light| Charging completed
| Green light(Blinks every 5 seconds)| Receiver is power on
| Green light (Flashes once)| Tone
| Yellow light (Flashes once)| Vibration
| Red light (Flashes once)| Static Stimulation

Charging
Tips: Please fully charge before use!

Turn on/off: Transmitter and Receiver

Function introduction

Tone
Transmitter delivers a beep tone with nonadjustable volume to the receiver collar. The indicator color shows green.

Vibration
Transmitter delivers a vibrate with adjustable level (level1-16) to the receiverollar.The indicator color shows yellow.

Static Stimulation
Transmitter delivers a static stimulus with adjustable level (level1-16) to the receiver collar. The indicator color shows red.

How to test the Static Stimulation function？

Step 1 ：Make sure the Transmitter and receiver collar are on paired.
Step 2 ：Please start the static stimulation function and adjust the level to 10.
Step 3 ：Put the test light between two contact points and make sure its interface is touching the contact points. Press the static stimulation button again, if the test light is on which means the static stimulation is on going .

Pairing and select the communication channel

Tips Th e default factory settings of the communication channel is channel

Please follow the steps below if you want to switch to another channel

Step 1 ：Unlock the transmitter and long press the button to select a signal channel.

Step 2 ：Make sure the receiver is shut down first, and hold on the on/off button for 7 seconds. The green light will flash quickly and enter to the matching state after hearing a beep.

• The green light flashes quickly and will enters the matching state after hearing a beep.
  

Step 3 ：Please press the tone or vibration function button within 10 seconds when entering the matching state, and the receiver will beep twice indicating that the matching is successful.

Note ：

1. Repeat above steps when timeout
2. One channel can control multiple receivers simultaneously

Wearing Method And Precautions

Wearing Method

①| Please keep the dog in a comfortable standing position and ensure that the receiver is turned off before wearing.|
---|---|---
②| Please place the receiver in the middle of the dog’s neck and ensure that the direction of the switch button is upward, and the contact point is aligned with the dog’s throat.Check the tightness of the receiver collar.|
③| The wearing standard is that a finger can be held between the collar and the dog’s neck. If the collar is too loose or tight, the normal operation of the product will be affected.|
④| Mark the length of the collar with a pen, remove the collar and cut off the excess part, and slightly burn the edge with a lighter to prevent the thread from falling off.|

Frequently Asked Questions

5V1A original charging cable
Charging cable is damaged| Replace the charging cable and try again
The product low power enters the low power protection mode| The battery needs to be activated. Please extend the charging time slightly
2. The product does not turn on| Check whether the touch of the key is normal| No response means damaged
No display/sound prompt| Recharge again
The product low power enters the low power protection mode| Recharge and wait for the battery to activate
Wrong startup method| Long press the on/off button
3. No static stimulation/No vibration| The shock level is set 0, or the shock level is too low| Adjust high shock level and try again
---|---|---
The vibration level is set 0, or the vibration level is too low| Adjust high vibration level and try again
Check whether the battery is low and the output power becomes small| Charge the receiver in time
The dog hair not well groomed| The contact points are attached to the dog’s skin
The collar strap is wearing too loose| The receiver is worn in the middle of the dog’s neck, with a finger width gap between the collar and the neck
Remote & receiver not paired| Repair the remote with receiver
4. The collar strap is easy to fall offend not tight| The collar strap is wearing too loose| The receiver is worn in the middle of the dog’s neck, with a finger width gap between the collar and the neck
---|---|---
Excess collar strap not cut off after first-time wear product| Collar straps should be passed through each buckle, and excess collar straps should be cut off and clamped to the size of the dog’s neck
The collar strap is damaged and needs to be replaced| Please refer to page 6 for instructions on wearing the collar
5. The remote screen displays garbled characters| Low battery power| Use it after it is fully charged
Violent handling and beating. The transmitter was damaged by a dog.|

1. the use of the process can not be violent operation, artificial damage will not be after-sales; Keep the transmitter and receiver out of sight of the dog when in and out of use.
2. In case of garbled characters on the display screen after receiving the goods, contact customer service for confirmation after shooting video or pictures

6. Dog injuries| Wear it for too long time| It should not be worn for more than 12 hours and should be checked every 2 hours
---|---|---
Worn when the dog’s hair is wet or swimming, the shock column will wear on the skin|

1. Keep your dog’s neck area dry and clean, and donor wear products while swimming or playing with your owner
2. Use silicone caps to reduce the friction of the contact points

Dog has skin diseases| Stop using the product for a few days. If the condition persists for more than 48 hours, consult your veterinarian for help
The dog is less than 6 months old| The pet should be at least 6 months old before using the training collar, and the dog should be able to recognize basic obedience commands, such as “sit” or “stay.”
7. Accessories missing, accessories damage, etc| Transport damage or packing miss| Contact customer service to confirm the repair/return with shooting video or photos.
8. Product compatibility issues| The remote and receiver need to match, if buy another sellers’ remote or receiver, it can not be paired with ours| Buy the same model from us to pair
---|---|---
9. Safety of vibration/shock| A brief vibration or shock won’t hurt, but it can make the dog feel uncomfortable| The continuous use of vibration and shock should not exceed 30 seconds. The dog training collar requires the user to interact with and train the pet to achieve the desired effect
Our vibration and shock functions have been tested on different types of dogs over a long period of time
10. Remote range does not equal actual| The actual remote range may vary due to terrain, weather, vegetation, battery capacity, and interference from other radio devices.| Change the venue and try to train in a place with less interference
11. The product does not effect| The dog training collar is a training aid product, which requires users to interact and train their pets to achieve the desired effect|

1. Seek training support from a professional do trainer
2. Proper training time. The training course should be kept active and short, with a better effect of about10-15 minutes each time

12. It is effective at first, but doesn’t work later| ① Check whether the device works normally
② Wearing for a long time dog has been fully adapted|

1. Change the levels and readjust the training mode
2. It is recommended not to wear the product whatnot training

---|---|---
13. The product does not work| Can not turn on it| Test after charging
Remote & receiver not paired well| Repair the remote with receiver
14. Dog bites damage thDevice/collar belt| The dog resists the product| Do not let the dog see when wearing and operating the product
15. Do not use the product for a long time| If the product is not used for a long time, it will lose power until it is shut down.|

1. Please turn it off every time when not using it
2. If it is not used for a long time, please refer to the manual for charging instructions before charging it and use

Warranty and repair information

Year Warranty
The original purchaser for this unit is provided with 1-YEAR WARRANTY.
The warranty begins from the date of purchase. For the first year, coverage is for both Parts and Labor on warranty repair services but the return postage is for the buyer’s account. Accessories such as chargers, straps, and batteries are covered for the first year only. When the warranty expires, customers will need parts and repairs at their own expense.

Won’t Qualify for 1-Year Warranty
We do not offer warranty for products that have been bought secondhand or as a resold product.
Manual damage or loss is not covered by the warranty.
Any water damage on the Water Resistant Transmitters and the Water Resistant Receivers of our product series will not be covered.
The warranty is void if the unit has been altered or an unauthored- razed person who attempts to repair work has damaged the unit. Replacement of batteries is not recommended during the warranty period. If the customer chooses to replace the batterie- sandy damage to the unit during the change- out by the owner will make the warranty void.

To activate the warranty
If there is problem with your product, please send the below info to soulchat_service@outlook.com for after-sale service.

1. Your original order page.
2. Your current shipping address After confirm the info, we will send you the replacement within 5 business days.
3. After confirm the info, we will send you the replacement within
4. business days.

Compliance

This symbol means that the product has been CE certified, and any product with CE mark is proved in compliance with the local regulations of EEAs

This symbol means that the electromagnetic interference of the equipment is lower than the limit approved by the Federal Communications Commission.

Disposal of package: The package shall be disposed by  as waste papers for cardboards and cartons Recycling for packaging cases

Disposal system: The disposal system shall be applicable to EU and other European countries and capable of collecting recyclable materials by category

FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>