AURATON Libra U Wireless Digital Room Thermostat User Manual

AURATON Libra U Wireless Digital Room Thermostat

AURATON Libra
Specifications:

• Type : Weekly, wired thermostat
• Compatibility : Works with gas or electric heating devices
• Temperature Control : 3 independently adjustable temperatures (Day, night, anti-freezing)
• Programs : 9 independent temperature programs (including 6 user-modifiable programs)
• Display : Backlit LCD display

Description:
The AURATON Libra is a weekly, wired thermostat designed to work with gas or electric heating devices. It features a backlit LCD display, four function buttons, and a temperature setting knob with an OK button on the front part of the regulator’s casing.

LCD Display:

1. Time is displayed in a 24-hour system.
2. Timeline: Program progress indicator divided into 24 segments, each representing one hour.
3. Day Mode Indicator (S): Indicates the thermostat is operating in the day mode.
4. Night Mode Indicator (T): Indicates the thermostat is operating in the night mode.
5. Anti-freezing Mode Indicator (U): Indicates the thermostat is operating in the anti-freezing mode.
6. Manual Control Indicator (V): Appears when no program is used.
7. AURATON Libra Activation Indicator (Y): Provides information about the operating status of AURATON Libra.
8. Program Number: Indicates the number of the currently running program.
9. Dead Batteries (X): The indicator is visible when the battery voltage level is low.

Choosing the right location for AURATON Libra:
The correct operation of AURATON Libra is influenced by its location. It should be installed on an internal wall with free air circulation, away from heat-emitting devices and direct sunlight. Avoid placing it near doors or in areas exposed to vibrations.

Connecting cables to AURATON Libra:
To connect the wires, follow these steps:

1. Remove the plastic casing to access the terminals located on the back of AURATON Libra.
2. Connect the wires to the appropriate terminals.

FAQ:

1. Q: How many temperature programs can I set with AURATON Libra?
   A: You can set up to 9 independent temperature programs, including 6 user- modifiable programs.

2. Q: What is the purpose of the backlit LCD display?
   A: The backlit LCD display allows you to supervise the operation of the device even in poorly lit rooms.

3. Q: How do I know if the batteries need to be replaced?
   A: The “Dead Batteries” indicator (X) will be visible when the minimum permissible battery voltage level is exceeded. Replace the batteries as soon as possible.

• AURATON Libra
  User manual ver. 20220222
  The document presents collected information on safety, assembly and use of AURATON Libra.

Weekly, wired thermostat
AURATON Libra is a weekly, wired thermostat designed to work with a gas or electric heating device.

•  Day, night, anti-freezing.3 independently adjustable temperatures
•  Including 6 user-modifiable programs.9 independent temperature programs
• Backlit LCD display
  The backlit display allows you to supervise the operation of the device even in poorly lit rooms.

Description of the AURATON Libra

Weekly, wired thermostat
There is a backlit LCD display, four function buttons and a temperature setting knob with an OK button on the front part of the regulator’s casing .

1. LCD display

2. setting knob with integrated button

3. mode selection buttons:
    – day mode – comfort,
    – night mode – economic

4. selection button

5. date/time/day of week setting button

6. temperature setting button

Display

1. Day of the week (8) – Indicates what day of the week it is. Each day is assigned a number.

2. Temperature – AURATON Libra displays the temperature of the room in which it is installed in normal operation mode.

3. Temperature unit – tells you that the temperature is displayed in Celsius degrees (°C).

4. Clock
   Time is displayed in a 24-hour system.

5. Timeline
   Program progress indicator. The timeline is divided into 24 segments, each of which corresponds to one hour. It shows how a given program is implemented. Esee chapter
   “Timeline”)

6. Day mode indicator
   Indicates that AURATON Libra is operating in the day mode. (see chapter “Temperature programming”)

7. Night mode indicator
   Indicates that AURATON Libra is operating in the night mode. (see chapter “Temperature programming”)

8. Anti-freezing mode indicator
   Indicates that AURATON Libra is operating in the anti-freezing mode. (see chapter “Anti-freeze mode”)

9. Manual control indicator
   Appears when no program is used. (see chapter “Manual control mode”)

10. AURATON Libra activation indicator
    Segment giving information about the operating status of AURATON Libra. Visible when the regulator is turned on.

11. Program number
    Indicates the number of the currently running program. (see chapters “Factory programs” and “Weekly programming”)

12. Dead batteries
    The indicator is visible when the minimum permissible battery voltage level is exceeded. The batteries need to be replaced as soon as possible.

IMPORTANT:
In order to maintain any programmed parameters, the battery replacement operation should not exceed 30 seconds.

Choosing the right location for AURATON Libra

• The correct operation of AURATON Libra is largely influenced by its location. Using the device in a place with no air circulation or a place with direct sunlight may result in incorrect temperature control. AURATON Libra should be installed on the internal wall of a building (a partition wall), in an environment with free air circulation. You should avoid proximity to heat-emitting devices (TV, heaters, refrigerators) or locations exposed to direct sunlight. The vicinity of doors and exposing
• AURATON Libra to possible vibrations may also cause problems with proper operation of the device.

Connecting cables to AURATON Libra

To connect the wires, remove the casing as shown below:

The terminals are located on the back of AURATON Libra, under the plastic casing.

1.  cover
2. screw
3. wire terminals

It is a typical single-pole double-throw relay. In most cases, the NC terminal is not used.

IMPORTANT:
After connecting the wires, place the plastic casing back on.

Battery replacement

The battery compartment is located inside AURATON Libra in the front of the casing. To install the batteries, remove the casing of AURATON Libra as shown in the figure below: IMPORTANT:
We recommend using alkaline batteries to power AURATON regulators. Do not use “rechargeable batteries” because their rated voltage is too low.1. – AAA 1.5 V battery socket

• Insert two 1.5V AAA batteries into the battery compartment, paying attention to the correct polarity of the batteries.
• IMPORTANT:
  After replacing the battery and assembling the cover, we recommend pressing the OK button twice to stabilise the relay operation.

Mounting AURATON Libra – the weekly, wired temperature regulator
In order to mount AURATON Libra on the wall:

1. Remove the casing (as shown in the “Battery Replacement” section)
2. Drill two holes with a diameter of 6 mm in the wall Emark the spacing between the holes using the rear part of the AURATON Libra casing).
3. Put wall plugs in the drilled holes.
4. Fix the rear part of the casing of AURATON Libra to the wall using the screws included in the kit.
5. Put the casing on.

IMPORTANT:
In the case of a wooden wall, there is no need to use wall plugs. It is enough to drill holes with a diameter of 2.7 mm (instead of 6 mm) and screw the screws directly into the wood.
hole for fastening screw

Putting the casing back on: IMPORTANT

Pay attention to the pins that transmit control to the relay when putting the front part of the casing to the rear part.

1. Front casing
2. Rear casing
3. Pins
4. The socket of the pin connector or the place where the pins contact the board

IMPORTANT:
Make sure that the “pins” are not bent and that they are placed in the correct spots on the relay board when assembling the casing. This is crucial for the proper operation of AURATON Libra.

Turning AURATON Libra on for the first time
After inserting the batteries correctly into the battery compartment, the LCD screen will display all the segments for a second and then the software version number.After a while, AURATON Libra will automatically switch to the time setting mode. A flashing item on the screen means that the device is currently in the edit mode. Turn the knob to the left or right to set the required hour and confirm using the button .Turn the knob to the left or right to set the correct value on the minute segment and confirm using the button. A flashing symbol of the day of the week appears in the upper left corner. Turn the knob to the left or right to set the day and confirm the selection using the button.

• IMPORTANT:
  If no button is pressed for 60 seconds in the initial edit mode, 12:00 o’clock and Monday, as the day of the week, will be set automatically.

• IMPORTANT:
  When programming any other functions, not pressing any button for 10 seconds is equivalent using the button.

Setting the clock and day of the week

To set the clock:

1. Press the button. The hour segment on the display will start flashing.

2.  Turn the knob to the left or right to set the required hour and confirm with using the  ( button).
   Turn the knob to the left or right to set the correct value on the minute segment and confirm using the  ( button).

3. A flashing symbol of the day of the week appears in the upper left corner. Turn the knob to the left or right to set the day and confirm the selection using the  ( button). IMPORTANT:
   You can also switch by pressing the m button.

Default program setting

• Monday – Friday:
  The heating device maintains the day temperature (S) from 05:00 to 8:00 A.M. and from 3:00 to 11:00 P.M.

• Saturday – Sunday:
  The heating device maintains the day temperature (S) from 06:00 A.M. to 11:00 P.M. default temperature settings:

• day temperature – 21,0°C

• night temperature – 19,0°C

•   anti-freeze temperature – 7,0°C

Programming day and night temperatures
AURATON Libra allows you to program 2 types of temperature:

• Day temperature (S) – from 5 to 30°C
• Night temperature (T) – from 5 to 30°C

To set one of the temperatures above:

1. Press the n button.
   • The display will show the currently set temperature with one of the two symbols:
   • – day temperature;
   •  – night temperature.
2. Turn the knob to the left or right to set the desired temperature value.
3. Pressing the n button will switch the edit mode between the day and night temperatures (S, T).
4. After setting the temperatures, confirm using the ( ) button.

IMPORTANT:
The night temperature setting can be equal to or lower than the day temperature. It is impossible for the night temperature to be higher than the day temperature.

Introduction to programming

Timeline
The timeline on the LCD display is divided into 24 sections. Each of them symbolizes 1 hour of the day.
Black rectangles above the timeline mean that the day temperature has been programmed for specific hours, and that there is no night temperature.
Example:

The figure above shows that from 6.00 A.M. to 11.00 P.M. Auraton Libra will control the heating device in such a way that the room temperature will be day temperature (S). AURATON Libra will switch to night temperature from 11.00 P.M. to 6.00 A.M. (T).

• Factory programs
  In order for AURATON Libra to know when to turn on the day and night temperatures, you should be set to an appropriate program for each day of the week. For this purpose, you can use one of the three factory programs (from 0 to 2):

• Program no. 0 – anti-freezing
  Unmodifiable factory program. Designed for all-day anti-freezing temperature setting.

• Program no. 1 – weekly
  Unmodifiable factory program. Sets day temperature from 5:00 to 8:00 A.M. and from 3:00 to 11:00 P.M.

• Program no. 2 – weekend
  Unmodifiable factory program. Sets day temperature from 6:00 A.M. to 11:00 P.M.

• Programs no. 3, 4,…., 8 – user-defined programs
  Programs from 3 to 8 are user-defined programs. They can be freely modified and adapted to specific requirements.

Programming

• Weekly programming
  To program AURATON Libra, set the day temperature intervals for individual days of the week. At other time, night temperature will be set.
  Sample AURATON Libra setting from Monday to Sunday. Outside the intervals programmed, the night temperature will be set.

Program selection
To set the program:

Press the key. Program number segment will start blinking.
Press the key as many times as required to set the day of the week for the program.
Press the key several times and select the program number requested. Programs 0-2 are factory-set, programs 3-8 can be edited.

Confirm selection pressing the ( key).
Repeat the procedure for the following days of the week.

jodyfying user-defined programs
To set the program:

Press the key. Program number segment will start blinking.
Press the key as many times as required to set the day of the week for the program.Press the key several times to select the program number required. Programs 0-2 are factory set, programs 3-8 can be edited.

• All (24) black rectangles will appear on the timeline. Each of them symbolises 1 hour. A visible rectangle indicates day temperature set for the given time. If no rectangle is displayed, -night temperature is set.
• Blinking rectangle indicates the point of the timeline which is modified.
• Press the r key to select day (rectangle on) or night temperature (no rectangle). Then, select the time interval for the temperature selected with the knob.
• By pressing the  key and selecting time interval the entire program is modified.
• Confirm selection with the ( key).

NOTE:
Any modified program for a specific day can also be selected and implemented during another day of the week.

Manual control

• Option 1:
  • If, for some reason, you want to stop the current program at a given moment and extend the day or night temperature, you can do it manually, but for not longer than 24 hours. To do this you should:
  • Hold the button for 3 seconds. Then, using the knob, select the number of hours of manual operation (24 hours at the most) and confirm the setting using the ( button.
  • AURATON Libra will wait until you choose one of the two temperatures which it should maintain (day or night). The change is made by using the  button or the knob. Confirm the selection using the ( button).
• Option 2:
  • If you want to suspend the execution of a given program, e.g. due to a party lasting longer than expected, but AURATON Libra has already started lowering the temperature for the night (the T symbol has appeared on the display), you should:
  • Press the  button, the display will show the symbols of a  and the . The day temperature will then be maintained until the next temperature change carried out by the program.
  • To withdraw the above-mentioned action press the  button. The  symbol will disappear from the display.
  • Similarly, if the program is using the day temperature but you want it to implement the night temperature immediately, you should:
  • Press the  button. The display will show the symbols of a  and the . The night temperature will then be maintained until the next temperature change carried out by the program.
  • To withdraw the above-mentioned action press the  button. The  symbol will disappear from the display.
• Anti-freezing temperature
  • In the event of being away for a long time, it is possible to turn on the anti-freezing temperature mode. It allows you to avoid the unpleasant consequences of water freezing in the heating system by automatically setting the temperature to 7°C. To set the anti-freezing program, simply select program 0 for the desired day of the week.

Resetting AURATON Libra

To perform a reset, remove the battery and wait until the data on the display disappears.

Master reset of AURATON Libra

MASTER RESET is performed by pressing and holding the button and at the same time installing the batteries. This causes AURATON Libra to return to its factory settings.

IMPORTANT:
All user-defined programs will be removed!

Configuration settings

Configuration settings are set one after another:

• heating mode/ air-conditioning mode Changes in hysteresis  Changes in the delay  Offset change    Clock calibration
• To enter the edit mode of the configuration settings, hold the h and ( buttons simultaneously for 3 seconds until the settings menu is displayed.

Heating mode/air-conditioning mode

• AURATON Libra can work in two modes:
  • Heating mode (preset) – set it if you want AURATON Libra to cooperate with heating devices.
  • Air-conditioning mode – set it if you want AURATON Libra to cooperate with air-conditioning devices.
• Turn the knob to the left or right to set the required mode. Confirm your choice by pressing the ( button. AURATON Libra will proceed to change the next parameter.

Changes in hysteresis

Hysteresis is supposed to prevent too frequent activation of the actuator due to small temperature fluctuations.
For example, in the case of ef=O hysteresis, when the temperature is set to 20°C, the boiler will be switched on at 19.8°C, and switched off at 20.2°C. In the case of ef=Q hysteresis, when the temperature is set to 20°C, the boiler will be switched on at 19.6°C, and switched off at 20.4°C.

• The hysteresis change mode is signaled by a flashing HI. Turn the knob to the left or right to set the desired hysteresis.
• HI 2 – ±0,2 °C (preset),
• HI 4 – ±0,4 °C,
• HI P – PWM operating mode (see chapter “PWM operating mode”).
• Confirm your choice by pressing the button. AURATON Libra will proceed to change the next parameter.
• Changes in the delay
• The delay prevents too frequent activation of the actuator, e.g. due to temporary drafts (caused by opening the window, etc.).
• The delay change mode is signaled by a flashing 90:SE. By turning the knob left or right, we set the delay. 90:SE – delay of 90 s (preset), 0:SE – no delay
• Confirm your choice by pressing the  button. AURATON Libra will proceed to change the next parameter.

Offset change

• Offset allows you to calibrate temperature indications with a tolerance of ± 3 °C. AURATON Libra may for example show that the temperature in the room is 23 °C, while a regular room thermometer next to it may show 24 °C. Changing the offset by +1 degree, will make AURATON Libra show the same temperature as the room thermometer.

• The offset change mode is signaled by a flashing OFFS. By turning the knob to the left or right, you can set the desired value in the range from -3.0 to 3.0 (preset – 0.0). Confirm your choice by pressing the  button. AURATON Libra will return to the normal operating mode.

• IMPORTANT: If no button is pressed for 10 seconds while changing the configuration settings, AURATON Libra will return to the normal operating mode.

• IMPORTANT: Pressing any function button for the first time always turns on the backlight, and then the function of a specific button.

Clock calibration
The function is used to correct the clock indications in case of any deviations. If the clock is working incorrectly within a week, the extent of incorrect clock indications should be determined. This value should be entered in AURATON Libra in the form of seconds.

• Example 1:
  After a week of operation, AURATON Libra shows time accelerated by 1 minute and 20 seconds (60 + 20 = 80). In this case you should slow down the clock by setting C -80.

• Example 2:
  After a week of operation, the clock in AURATON Libra is 2 minutes slow (2 x 60 = 120). In this case you should speed up the clock by setting C 120.

• IMPORTANT:
  The number of seconds should be determined after one week of operation of AURATON Libra for the clock calibration function to work correctly (7 days = the number of seconds to be added or subtracted, maximum 294 seconds).

• IMPORTA NT:
  If no button is pressed for 10 seconds while changing the configuration settings, AURATON Libra will return to the normal operating mode.

PWM operating mode

• (Pulse-Width Modulation)
• By changing the hysteresis settings (chapter “Configuration settings”), you can turn on the PWM operating mode. In this mode, AURATON Libra cyclically turns on the heating device in order to minimize temperature fluctuations. AURATON Libra checks temperature rise times and temperature drop times.
• Knowing these values makes AURATON Libra turn on and off the heating device in appropriate cycles to maintain the temperature to the set value as close as possible.

1. Temperature
2. Time
3. Set temperature
4.  Room temperature

IMPORTANT:
AURATON Libra can turn on the heating device despite the fact that the temperature in the room is higher than the set temperature in the PWM mode. This is caused by the PWM algorithm aiming at maintaining the set temperature and anticipating the behavior of the thermal system.

Additional remarks

• At least 30 seconds must elapse between switching the relay off and on again.
• AURATON Libra enables you to turn on or off the control functions at any time (e.g. after a heating season) by briefly holding down (for about 5 seconds) the  button (AURATON Libra will only show the current time and room temperature – no “timeline”).
• Pressing any function button for the first time always turns on the backlight, and then the function of a specific button. When using the knob, each step keeps the backlight on.
• When programming any function, not pressing any button for 10 seconds is equivalent to
  pressing the button.

The AURATON Libra connection schematics

1. Heating device ffKg. a gas furnace
2. electric heating device (MAX 230 V AC, 16 A)

Cleaning and maintenance

• The outside part the device should be cleaned with a dry cloth. Do not use solvents (such as benzene, thinner or alcohol).
• Do not touch the device when your hands are wet. It may cause electric shock or serious damage to the device.
• Do not expose the device to excessive smoke or dust.
• Do not touch the screen with a sharp object.
• Keep the device away from liquids or moisture.

Technical specifications

• Power supply: 2 x AAA (2 x 1.5 V), alkaline
• Working temperature range : 0 – 45 °C
• Signalling the working status : LCD display
• Number of temperature levels : 2
• Anti-freeze temperature : 7 °C
• Temperature measurement range : 5 – 30 °C
• Hysteresis: ±0,2 °C / ±0,4 °C / PWM
• Relay load capacity: Max. 250 V AC, max. 16 A
• Working cycles: Weekly programmable
• Level of security: IP20
• Dimensions [mm]: 90 x 90 x 36

Disposing of the devices

The devices are marked with the crossed-out wheeled bin. According to European Directive 2012/19/EU and the Waste Electrical and Electronic Equipment Act, this kind of marking indicates that the equipment, after its operational life must not be disposed of together with other waste from households. The user shall return it to a collection point for electrical and electronic waste.

• Hereby, LARS Andrzej Szymanski declares that the radio equipment type AURATON Libra is in compliance with Directive 2014/53/EU and 2011/65/EU. The full text of the EU declaration of conformity is available below in the download area.
• Contact and address of the manufacturer:
  • LARS,. 14 64-320
  • www.auraton.pl
• Download
  • User manual
  • Declaration of conformity

References

• AURATON pompy ciepła, termostaty, sterowniki, smart home
• AURATON Libra – AURATON manuals

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>