LG GP57ES40 External Ultra Portable Slim DVD-RW Black, Silver User Guide
- June 4, 2024
- LG
Table of Contents
GP57ES40 External Ultra Portable
Slim DVD-RW Black, Silver
User Guide
Installation
Hardware Installation
NOTES
- Please pay attention to handling Electrostatic Sensitive Devices, you may use anti-static products such as wrist straps, heel straps, and mats to protect your body from electrostatic.
- Make sure you have a personal computer with one or two open USB ports before connecting the drive to your computer.
Connection to computer or A/V Device
Connect the drive to the computer as shown in the figure.
1 Connect the USB cable (mini plug) to the drive.
2 Connect the other end of the USB cable to your computer.
The drive may get its power from the PC USB power. All systems may not meet
USB power requirements and full performance may not be achieved.
In this case, connect to the USB Y-type cable (not supplied.).
When the computer is ready, confirm that the drive is detected. And then, insert the supplied software CD into the drive and install the software.
NOTES
-
Please do not connect the USB cables by any means other than specified above.
Using the wrong type of cable with this drive can cause it to malfunction. -
The appliance is not intended for use by young children or infirm persons without supervision.
Young Children should be supervised to ensure that they do not play with appliances. -
If the appliance is supplied from a cord extension set or an electrical portable outlet device, the cord extension set on the electrical portable outlet device must be positioned so that it is not subject to splashing or ingress of moisture.
The drive supports both Windows and Mac®. To use it properly, please follow
the directions below.
How to Eject Disc from the drive
-
When using with Mac
– Click the eject button located on the Mac OS menu or toolbar. -
When using Windows
– Press the eject button on the front of the product. -
Software CD (for Windows only)
– The Software CD includes DVD software for usage for Windows.
Location and function of controls
The following is the general figure of the design of the drive.
The drive’s appearance and specifications may change without prior notice.
Front
-
Disc Tray
-
Drive activity indicator
The LED is used to indicate the operation of drive. -
Eject Button
-
Emergency Eject Hole
Rear
- USB Connector (mini)
This connector is used to connect to the USB cable.
What is TV Connectivity?
TV Connectivity is a function that allows you to enjoy videos, pictures, and
music by connecting this product to a compatible A/V device (e.g. DIGITAL TV,
DIGITAL PHOTO FRAME, PC) that supports USB connectivity.
How to Use TV Connectivity
-
This product defaulted to the ODD mode when it is powered on.
-
With the tray open, press and hold the ‘Eject’ button for 2 seconds.
(The LED indicator will turn on, switching to TV mode. Press and hold the button again for 2 seconds with the tray open to return to ODD mode.) -
Insert your supported media into the drive.
The disc file system will be converted to FAT32 and will be recognized as USB flash memory. -
Select and play the files from your A/V device to enjoy videos, pictures, and music.
Refer to your A/V device owner’s manual for more information.
-
NOTES
- Normal operation is not guaranteed if you use a USB hub or unspecified USB extension cables.
- Due to compatibility issues with some AV devices and discs, may not work.
To install of your product, please read this guide manual carefully and completely.
Features
- Universal Serial Bus (USB) 2.0 interface for high-speed data transfer.
- Buffer Under Run error protection technology
- Emergency eject support
- Combination of CD-R/RW, DVD-R/RW, DVD+R/RW, DVD+R DL, DVD-R DL, M-Disc (DVD+R SL), and DVD-RAM drive functions in one drive.
- Supports region playback control Phase II.
- PC USB powered, no AC adapter needed.
- Supports TV Connectivity
Cautions
A system meeting the following requirements is needed in order to use USB
2.0 operation with this drive.
-
A computer that is equipped with a USB 2.0 – compliant USB connector or PCI adapter card, and on which the USB 2.0 EHCI (Enhanced Host Controller Interface) driver software 1) has been installed. 1) The USB 2.0 EHCI driver software is supplied with currently available PCI adapter cards that conform to USB 2.0. Further, Microsoft has released the USB 2.0 EHCI driver software for Windows XP, therefore it is also possible to use this driver software with Windows XP SP3.
If you want to know in detail, please contact your USB 2.0 adapter dealer or consult your PC manufacturer, or consult the Microsoft Corporation Web site. -
Under Windows 8 operating system, a specific mainboard with nVidia GeForce 7025 Chipset may cause an abnormal operation.
System Environment
Computer
This unit can be operated in the system environment explained here.
System requirements| CPU| Pentium IV 2.4 GHz or Higher(with USB 2.0) for basic
performance (Recommended for optimal performance: Pentium IV 3.2 GHz or
Higher).
---|---|---
Memory| 256 MB or larger (Recommended: 512 MB).
Hard disk| 20 GB or more free space. (The free space needed for writing
depends on the quantity of data.)
Video Memory| 64 MB (Recommended: 128 MB).
Interface| USB 2.0 (3.0 Compatible)
CD-ROM drive| For Software installation
Software Required OS| Windows 8.1/Windows 8/Windows 7/Windows Vista (32-bit,
64-bit)/Windows XP SP3, Mac OS X v.10.7.5 or Higher, Direct X 9.0 or Higher
CD-R, CD-RW, DVD-R, DVD-RW, DVD+R,
DVD+RW, DVD-RAM, DVD±R DL discs| CD-R: LG, Mitsubishi Kagaku Media,
Verbatim, That’s, TDK, Ritek, or HP discs are recommended.
CD-RW: LG, Mitsubishi Kagaku Media, Verbatim are recommended.
DVD-R: Mitsubishi Kagaku Media, Maxell, That’s recommended.
DVD-RW: Victor. JVC, Mitsubishi Kagaku Media, TDK are recommended.
DVD+R: Mitsubishi Kagaku Media, That’s, Maxell is recommended.
DVD+RW: TDK, Mitsubishi Kagaku Media, Ricoh are recommended.
DVD-RAM: Maxell and Mitsubishi Kagaku Media are recommended.
M-Disc (DVD+R SL) : Millenniata
DVD±R DL: Mitsubishi Kagaku Media, Verbatim are recommended.
- For Windows 8.1/8/7/Vista, 1 GB of RAM or large is recommended.
- Compatibility problems in the write/read function may occur with some media depending on the media manufacturing quality.
- To achieve maximum Record & Write speed your system may require data to be copied first to the computer’s hard drive rather than directly from another source disc or drive.
- Please visit http://www.m-disc.com to learn more about the M-DISCTM.
Specifications
Supported Discs| DVD-ROM(Single/Dual), DVD-RW, DVD-R, DVD+RW, DVD+R,
DVD+R
Double layer, DVD-R Dual layer, DVD- RAM, M-Disc (DVD+R SL),
CD-Digital Audio & CD-Extra, CD-Plus, CD-ROM, CD-ROM XA-Ready,
CD-I FMV, CD-TEXT, CD-Bridge, CD-R, CD-RW, Photo-CD (Single &
Multi-Session), Video CD, DVD-VIDEO
---|---
Dimensions (WxHxD)| 141 mm x 14 mm x 136.5 mm (5.6” x 0.6” x 5.4”)
Weight| About 200 g (0.4 Ibs)
Interface| USB 2.0 (3.0 Compatible)
Read/Write Speed| Write : DVD-R: 2x, 4x, 8x
DVD-RW: 2x, 4x, 6x
DVD-RAM: 2x, 3x, 5x (Ver. 2.2 & higher)
M-Disc (DVD+R SL): 4x
DVD+R DL: 2.4x, 4x, 6x
CD-R: 10x, 16x, 24x
DVD-R DL: 2x, 4x, 6x
DVD+R: 2.4x, 4x, 8x
DVD+RW: 2.4x, 4x, 8x
CD-RW: 4x, 10x, 16x, 24x Read: DVD-R/RW/ROM: 8x/8x/8x max.
DVD-R DL: 8x max.
DVD-RAM (Ver.2.2 & Higher): 6x max.
M-Disc (DVD+R SL): 8x max.
DVD-Video (CSS Compliant Disc): 4x max.
DVD+R/+RW: 8x/8x max.
DVD+R DL: 8x max.
CD-R/RW/ROM: 24x/24x/24x max.
CD-DA (DAE): 24x max.
- For the sake of periodic improvements, specifications and appearance are subject to change without prior notice.
- The maximum data transfer rate varies according to the performance capabilities of the PC.
- We have taken all possible measures to assure the quality of our products, but we cannot be responsible for the consequences if a defect occurs.
Data transfer rate
Sustained| CD-ROM : 3,600 kB/s (24x max)
DVD-ROM: 11.08 MB/s (8x max)
---|---
Average Access
Time (1/3Stroke)| CD-ROM: 140 ms (Typical)
DVD-ROM: 160 ms (Typical)
DVD-RAM: 200 ms (Typical)
Buffer capacity| 0.75 MB
MTBF| 60,000 Power On Hours (Duty Cycle 10 %)
Power Requirement| 5 V DC
Operating Environment
Temperature| 5 °C to 40 °C
Humidity| 15 % to 85 %
Storage Environment
Temperature| -30 °C to 60 °C
Humidity| 10 % to 90 % RH
Software
Install the appropriate CD Recording Authoring Software before using this
unit.
- Please uninstall any previous CD-burning software you may have loaded on your PC in order to prevent possible compatibility issues.
Once you have installed the application software, you may (if you wish) begin to reinstall the previous software, taking note of errors. We recommend using the drive with the latest software as some problems encountered when using the drive can be solved by updating the software.
Worldwide corporate site : http://www.LG.com
Safety Instructions
CAUTION: The laser used in the Drive can damage your eyes. Do not attempt
to open the cover. To reduce the risk of electric shock, do not remove the
cover (or back).
There are no user-serviceable parts inside. Refer servicing to qualified
service personnel.
Use of controls or performance of procedures other than those specified herein
may result in hazardous radiation exposure.
WARNING: To reduce the risk of fire or electric shock, do not expose this
appliance to rain or moisture.
EU Conformity Notice
LG Electronics hereby declares that this/these product(s) is/are in
compliance with the essential requirements and other relevant provisions of
Directive 2004/108/EC, 2006/95/EC, 2009/125/EC and 2011/65/EU.
European representative :
LG Electronics Inc. – EU Representative
Krijgsman 1, 1186 DM Amstelveen
The Netherlands
CLASS 1 LASER PRODUCT
CAUTION: CLASS 3B VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS DEFEATED. AVOID EXPOSURE TO THE BEAM.
FCC COMPLIANCE STATEMENT
Note: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an Authorized Service Center for help.
• FCC WARNING
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
• This Drive is for use only with UL-listed personal computers that have
installation instructions detailing user-installation of card cage accessory.
- Microsoft® and Windows® are trademarks registered in the United States and other countries by Microsoft Corporation.
- The company names and product names written in this manual are trademarks or registered trademarks of the respective companies.