ROXICOSLY CR1024 Projection Alarm Clock for Bedroom Instruction Manual

Specifications

Product Size:| 7.87×2.36x 3.42inches
Product Weight:| 0.52 pounds
Adapter nput:| AC 100-240V.
Adapter output:| DC 5V/2A
Power input:| DC 5V
Type-C port input/output:| DC5V/A
USB port charging output:| DC5V/I1A
Backup battery:| 2xAAA batteries (not included)
Package Lists:| 1x Projection Alarm Clock
1x USB Power Adapter
1x Power Cable
1x User Manual

Installation Notes

1. 1.Insert 2x 1.5V “AAA” batteries into the battery compartment located at the bottom of the machine to ensure that the clock maintains the time and alarm settings during power outages.
   Note: Batteries are not included, without AC power in, batteries don’t support time display or any other functions.

2. Connect the adapter cable to the DC jack and plug it into 100-240V AC wall outlet.

Time Setting

1. To change the 12H/24H time format : Hold press the “TIME/12/24” button.
   This will toggle between the 12-hour and 24-hour time formats. In the 12-hour format, an <AM/PM >icon will be displayed.

2. Press the “TIME/12/24” button to enter = the hour setting mode. The hour digits ‘Uqg will start flashing. Use the “+”and ” =” buttons to adjust the hour display.

3. Press the “TIME/12/24″ button again to enter the minute setting mode. The minute digits will start flashing. Use the” +”and” – “buttons to adjust the minute display.

4. Press the “SNOOZE/OK/LIGHT” button or the “TIME/12/24” button to confirm the time, or wait for another 10 seconds for automatic confirmation.
   Note: Hold press “+ “or *-” to quickly set the hour or minute.

Date Setting and DST

1. Press the “DATE/DST” button to enter the date setting mode. The will start flashing (defaultis 2023). Use the “+” and” – “buttons to select the desired year. Press the “SNOOZE/OK/LIGHT” or “DATE” button to confirm.

2. After confirming the year, enter the month setting. The will flash. Usethe”+”and” -“buttons to select the desired month. Press the “SNOOZE/OK/LIGHT or “DATE” button to confirm.

3. After confirming the month, enter the day setting. The will flash. Use the”+ “and” -“buttons to select the desired \day. Press the “SNOOZE/OK/LIGHT” or “DATE” button to confirm.

Note: If no action is taken by pressing “SNOOZE/OK/LIGHT” or “DATE”, the settings will be automatically confirmed and the date setting will be completed after 10 seconds.

DST Function: (1) Press and hold the “DATE/DST” button for 2 seconds to enter DST mode. The time will advance by one hour, and the icon will be displayed. (2)To exit DST mode, press and hold the “DATE/DST ” button again for 2 seconds. The time will be adjusted back one hourand the DSTicon will be turned off.

Alarm Setting

1. Press “AL1″ button to enable or disable
   .

2. Press and hold the “ALI” button for 2 seconds to enter  setting mode. -# P~ The hour digits will start flashing. Use the” +”and ” – ” buttons to adjust the hour display.

   ---

3. Press the “AL1” or “SNOOZE/OK/LIGHT” button again to enter the minute setting mode. The minute digits will start flashing. Use the “+” an buttons to adjust the minute display.

4. When the display shows flashing, press “+”and ” – “buttons to adjust the alarm period range. (the available options are < Sat-Sun>and< One-Time>)

5. Press the “AL1” or “SNOOZE/OK/LIGHT” -7} D m” button to save the alarm settings and exit the alarm setting mode.

6. Use the “VOL” button to adjust the volume level (defaults , volume ranges from to< U07> in a cycle).

Note: If no action is taken by pressing “SNOOZE/OK/LIGHT” or “AL1″ during the alarm setting process, the settings will be automatically confirmed after 10 seconds, and the alarm setting mode will be exited, returning to the main time display.

Turn off Alarm & Snooze Mode

1. When the alarm goes off, press the “SNOOZE/OK/LIGHT” button, the icon will be flashing and alarm will stop temporarily and ring again after 9 minutes. (SNOOZE mode can be recycled 9 times)

2. During the alarm ringing, press the “AL1” or “AL2” button to turn off the alarm for the current day. The alarm will ring again the next day.

3. If there is no operation after the alarm goes off, the alarm will automatically stop after 60 minutes and ring again the next day.

Cancel Alarm

Press the “AL1” button repeatedly until the alarm indicator disappears from the display. The alarm will never ring.

Note: The setting method for Alarm 1 is the same as Alarm 2.

Brightness Setting

Display screen brightness (default L03). Press the “DIM/°C/°F” button briefly to adjust the brightness of the display screen. It cycles through levels to.

Temperature/Humidity Function

The default temperature display is in Fahrenheit. Press and hold the “DIM/°C/°F “button for 2 seconds to switch to Celsius.
Note:

1. Temperature Range: -50°C to 70°C (-58°F to 158°F) (Accuracy deviation: =1°C)
2. Humidity Range: 1-99%RH (Accuracy deviation: +29%RH)

Night Light

When there is no alarm clock ringing, press the” SNOOZE/OK/LIGHT “button to turn on the night light. Press it again to dim the night light, and press it once more to turn off the night light.

Projection Mode

1. Press the button to turn on the projection.

2. Press again to flip it 180 degrees, and once more to turn off the projection.
   Note: (1)Best projection distance s 1.5 to 3.0 meters (4.92 t0 9.84 fee g

   88 =25).| Projector is a common LED Light . So the projector is not visible

   in bright environment.

3. Rotate the focus ring to adjust clarity of projection image.
   Note: if projection is fuzzy, please rotate the focus ring to adjust angle for clear image.

4. Press “DIM” button to adjust the brightness of projection for your preference.

Charging Other Devices

This alarm clock has two ports, USB and Type-C, which are compatible with charging two mobile devices at the  same time (charging cable not included), with a maximum charging current of 1A.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>