Roxicosly CL1000 Solar Hand Crank Camping Lantern User Manual
- June 6, 2024
- Roxicosly
Table of Contents
CL1000 Solar Hand Crank Camping Lantern
OUTDOOR ACTIVITIES NO POWER OUTAGES CONCRNS
User Manual
Chapter 1: LOCATION OF CONTROLS
| 1. Flashlight ON/OFF Button | 2. Handle |
|---|---|
| 3. Solar Panel | 4. USB Output Charging Port |
| 5. Main Light | 6. Micro USB Input Charging Port |
| 7. Crank Handle | 8. Flashlight |
Chapter 2: MAIN LIGHT CONTROL
When the 18650 rechargeable battery is fully charged, the main light can be continuously illuminated for no less than 35 hours.
Chapter 3: FLASHLIGHT CONTROL
- Click Flashlight ON/OFF Button to turn on flashlight.
- Click Flashlight ON/OFF Button again to turn off flashlight.
When the 18650 rechargeable battery is fully charged, the flashlight can be continuously illuminated for no less than 30 hours.
Chapter 4: USB OUTPUT CHARGING
Connect your phone charging cable with the USB output port on the top of the
Camping Light.
If the Camping Light has no power, you can rotate the crank handle for 815
minutes (time depends on your speed of rotation). then your phone will get
enough power to start up.
The maximum charge current is 1 Ampere.
Chapter 5: POWER SUPPLY MODE
-
Hand Crank Power
(1) Unfold the crank handle from the backside and rotate it in either direction.
(2) Rotate the crank handle for 3-5 minutes. It will generate ample power and activate the build-in rechargeable battery for initial use.
Note: Rotate the crank handle at the speed of 2 laps per second. It will generate 300-350mA electricity.
-
Solar Power
(1) Expose the solar panel to sunlight, Don’t charge indoors.
(2) It will generate 40-60mA electricity to charge the build-in 18650 rechargeable battery.
Note: Solar panels will generate 45-60mA electricity when exposed to sunlight. It is difficult to fully charge the battery with a solar panel, which is mostly used for maintaining the rechargeable battery. -
Micro USB Adapter Charging input
(1) Plug the adapter (optional) into the standard outlet, and then connect to the “Micro USB interface” jack on the broadside.
(2) It will also charge the built-in rechargeable battery in the meantime.
(3) It is highly recommended to use a 5V/2A adapter.
| Charging Type | 5V2A Adapter | Hand Crank | Solar |
|---|---|---|---|
| Charging Duration | 2 Hours | 10 Min | 30 Min |
| Main Light Working time | > 35 Hours | 20 – 30 Min | 20 – 30 Min |
| Flashlight Working time | > 30 Hours | 20 – 25 Min | 20 – 25 Min |
Note: 5V2A adapter is not included.
Main Light Wattage: 2.4W
Main Light Brightness: 200LM
Main Light Color Temperature: 6500-7000K
Flashlight Wattage: 3W
Flashlight Light Brightness: 350LM
Water Resistance: IPX4
CONTACT OUR EXPERTS
support@wismco.com
Http://www.wismco.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>