Govee H6058 StarPal Pro Portable Table Lamp User Manual

User Manual
Model: H6058
Gove Portable Lamp 

Safety Instructions

Read and follow all the safety instructions:

• The lamp is not waterproof. Avoid exposing it to splashing or dripping water.
• The operating temperature should be within -10° to 45°C (14° to 113°F).
• The lamp’s internal light source cannot be replaced. If it breaks, you must replace the entire lamp.
• Do not install the lamp with a dimming driver.
• Do not place the lamp near the heat source or expose it to the sunlight for a long time.
• Avoid installing the lamp near potentially dangerous sources (e.g., candles, liquid-filled objects).
• Avoid charging the product in environments lower than 32 °F (0 C )or higher than 113 F (45 C). Avoid using the product in environments below -4 F (-20 C)or above 140 F (60 C).

Introduction

Thanks for choosing the Govee Portable Lamp. This lamp emits warm and smooth white lighting, and you can also apply over 16M RGB lighting effects via connecting to the Govee Home app.

what You Get

At a Glance

Power Off: Press and hold for 10s (the light will flash with blue twice)
Sleep Mode: Press and hold for 2s
Awake: Press once in Sleep mode
Color Switch: Press to switch from different color

Installing Your Device

1. Connect the adapter to the lamp via the DC charging port;
2. Power on the adapter (the lamp is available to use during charging).

Pairing Your Device with the Govee Home App

What you need: A Wi-Fi router supporting the 2.4GHz and 802.11 b/g/n bands. 5GHz is not supported.

1. Download the Gove Home app from the App Store (iOS devices) or Google Play (Android devices).
2. Turn on the Bluetooth in your smartphone.
3. Open the app, tap “+” icon in the top right corner, and search “H6058″.
4. Tap the device icon and follow the on-screen instructions to complete the pairing.

Specifications

-10° to 45°C (14° to 113°F)
Working Temperature

Troubleshooting

1. Cannot connect to the Govee Home app.
   • Check if the device is powered on.
   • Check if Bluetooth on the smartphone is enabled, or try connecting with another smartphone.
   • When connecting for the first time, ensure the smartphone is near the device.
   • If the connection error still exists, please delete the connected device from “My Devices” on the app. Reconnect to the Govee Home app by following the instructions provided previously.

2. How long will the battery last after fully charged?
   • When powered by the battery, the lamp will automatically turn on energy- saving mode for better battery life.
   • With the warm white lighting, the battery can last for 4 to 5 hours. It can last longer with colored lighting.

3. After connecting to WI-FI, the device consumes a lot of power.
   • If connected to Wi-Fi, the device can be controlled not only by voice assistants but also remotely by Govee Home App. This will use a lot of power and decrease its standby time to only 26 hours.
   • Follow the in-app instructions to turn on Battery Saver Mode to extend the standby time.

4. How to check the battery status of the lamp?
   • You can check the battery status on the Govee Home app after connecting via Bluetooth.

5. Did Wi-Fi disconnect or failed to connect?
   • Check if the device is powered on.
   • Do not skip the Wi-Fi connection steps during the device pairing process.
   • Ensure your Wi-Fi router is 24GHz (56Hz is not supported).
   • Ensure you entered the correct Wi-Fi password during the Wi-Fi setup process.
   • Try using another smartphone to pair with the device to ensure your network is working properly.
   • Shorten the distance between the device and the Wi-Fi router to less than 50 inches, then reconnect.

6. Cannot connect to Alexa or Google Assistant.
   • Ensure the Wi-Fi connection is stable and working properly.
   • Go to “User Guide” on the app Settings page to pair the device again. Can multiple users control one device?
   • Each device can only be controlled by one account.
   • If multiple users want to manage the same device, ensure they all use the same account.

When disposing of secondary cells or batteries, keep cells or batteries of different electrochemical systems separate from each other. Be aware that discharged battery may cause fire or smoke, tape the terminals to insulate them
CAUTION: Risk of explosion if the battery is replaced by an incorrect type.
WARNING: The batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like. Extremely low air pressure may result in an explosion or the leakage of flammable liquid or gas.

FCC and ISED Canada Statement

This device complies with Part 15 of the FCC Rules and Industry Canada license-exempt ft55 standard(s). Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.

FCC and IC Radiation Exposure Statement

This equipment complies with FCC and IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance 20cm between the radiator & your body.  4 20 cm.
Responsible party :
Name: GOVEE MOMENTS(US) TRADING LIMITED
Address: 13013 WESTERN AVE STE 5 BLUE ISLAND IL 60406-2448
Email: support@govee.com 
Contact information : https://www.govee.com/support
The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced.
Not intended for illumination. Only used for creating ambiance.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks by Shenzhen Intellirocks Tech. Co., Ltd. is under license.  Gove is a trademark of Shenzhen Intellirocks Tech Co., Ltd. Copyright ©2021 Shenzhen Intellirocks Tech Co., Ltd. All Rights Reserved.

Customer Service
Warranty: 12-Month Limited Warranty
Support: Lifetime Technical Support
Email: support@govee.com
Official **Website:www.govee.com
@Govee
@govee_official
@govee.official
@Goveeofficial
@Govee.smarthome**https://www.govee.com/apps/qrcode
For FAQs and more information,
please visit WWww.govee.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>