FUFU GAGA KF020217-01 Hall Tree Upholstery With Multiple Storage Instructions
- June 16, 2024
- FUFU GAGA
Table of Contents
FUFU GAGA KF020217-01 Hall Tree Upholstery With Multiple Storage
Specifications
- Product: Hall Tree
- Version: 07/05/2022
Product Usage Instructions
Important Information
- Please read the entire manual before starting to assemble and/or use this product. Follow the manual thoroughly and keep it for further reference.
Avoid Scratches
- To avoid scratching, this furniture should be assembled on a soft layer, such as a rug.
Improve Efficiency
Try to find a partner to install with you, which can speed up the installation efficiency and shorten the time.
Anti-Topple Warning
Overturned furniture can cause serious or fatal crush injuries. To prevent tipping over, be sure to use the wall attachment, if not included with this product. Please purchase the wall attachment that fits your wall. If unsure, seek professional advice. Please read and follow each step of the instructions carefully.
Assembly Steps
-
Step 1
Fix slide rail (CL) and (CR) to the right and left side of board 15 with screw (I) as shown. -
Step 2
Attach board 16 to 15 with wooden dowel (C) and screw (D) as shown. -
Step 3
Fix boards 12 to 16 with screw (D) as shown. -
Step 4
Insert quickfit screw (A) into board 17 with a screwdriver. Attach board 20 to 17 with wooden dowel (C) and screw (J) as shown. -
Step 5
Attach board 17 to 15. Insert cam lock (B) into board 15 as shown, then turn cam locks clockwise to tighten. -
Step 6
Attach boards 16 to 19. Insert cam lock (B) into board 16 as shown, then turn cam locks clockwise to tighten. -
Step 7
Insert wooden dowel (C) into corresponding holes in boards 19, 20, 17, and 12 as shown. -
Step 8
Fix slide rail (CR) to board 14 with screw (I) as shown. Insert quickfit screw (A) into board 14 with a screwdriver. -
Step 9
Attach board 14 to the component. Turn cam locks (B) clockwise to tighten. Insert part (G) into corresponding holes, then fix with screw (E). -
Step 10
Connect boards 18 to 14 with a wooden dowel (C). Insert part (G) into corresponding holes, then fix with screw (E).
FAQ
- Q: Can I use an electric screwdriver?
- A: No, do not use an electric screwdriver. Use a manual screwdriver to avoid damaging the board.
- Q: What should I do if I encounter resistance during the rotation of accessories?
- A: Do not use force during the rotation of the accessories, as it may cause the board to crack. Check if everything is aligned correctly and try again.
PRECAUTION
IMPORTANT INFORMATION!
- please read the entire manual before starting to assemble and/or use this product. follow the manual thoroughly and keep it for further reference.
AVOID SCRATCHES!
- To avoid scratching this furniture should be assembled on a soft layer-could be a rug.
IMPROVE EFFICIENCY!
- Try to find a partner to install with you, which can speed up the installation efficiency and shorten the time.
ANTI-TOPPLE WARNING!
Overturned furniture can cause serious or fatal crush injuries. To prevent tipping over, be sure to use the wall attachment, if not included with this product. Please purchase the wall attachment that fits your wall. If unsure, seek professional advice. Please read and follow each step of the instructions carefully.
IMPORTANT !
- Any product which is assembled using any kind of screw must be re-tightened 2 weeks after assembly, and once every 3 months – to assure stability throughout the lifespan of the product.
- For regular maintenance and cleaning of the product, for the frame, please use a rag dipped in neutral detergent to fully wipe it, and then dry it with a clean rag. For glass materials, wipe with a rag dampened with water glass cleaner, and then dry with a dry rag.
- Do not use an electric screwdriver, and do not use too much force when installing, because the board is easy to break.
PARTS AND TOOLS
- Please prepare the following tools
- When installing, please carefully confirm whether each screw corresponds to the manual, accessories with similar shapes can be distinguished by size.
PARTS
Installation Instructions
- Fix slide rail(CL) and (CR) to the right and left sides of board 15 with screw(I) as shown.
- Please pay attention to the holes where the accessories are inserted
- Attach board 16 to 15 with wooden dowel(C) and screw(D) as shown.
- Fix boards 12 to 16 with screw(D) as shown.
- Insert quickfit screw(A) into board 17 with screwdriver.
- Attach board 20 to 17 with wooden dowel(C) and screw(J) as shown.
- Please do not use force during the rotation of the accessories, otherwise it may cause the board to crack.
- Please pay attention to the holes where the accessories are inserted Attach boards 17 to 15, insert cam lock(B) into board 15 as shown, turn the cam locks clockwise to tighten.
- Do not use an electric screwdriver, and do not use force during the rotation of the accessories, otherwise, it may cause the board to crack
- Attach boards 16 to19, insert cam lock(B) into board 16 as shown, and turn cam locks clockwise to tighten.
- Insert wooden dowel(C) into corresponding holes in boards 19,20,17 and 12 as shown.
- Fix slide rail(CR) to board 14 with screw(I) as shown.
- Insert quickfit screw(A) into board 14 with screwdriver.
- Attach board 14 to the component, turn cam locks(B) clockwise to tighten, insert part(G) to corresponding holes, then fix with screw(E).
- Connect boards 18 to 14 with a wooden dowel(C), insert part(G) into corresponding holes, and then fix with screw(E).
- Please pay attention to the holes where the accessories are inserted.
- Insert wooden dowel(C) into corresponding holes in boards 19,20,17,12 and 18 as shown.
- Fix slide rail(CL) to board 13 with screw(I) as shown.
- Insert quickfit screw(A) into board 13 with screwdriver.
- Attach board 13 to the component, turn cam locks(B) clockwise to tighten, insert part(G) to corresponding holes, then fix with screw(E).
- Insert quickfit screw(A) and wooden dowel(C) into board 17 as shown.
- Attach board 5 to 4 with wooden dowel(C) and screw(D) as shown.
- Do not use an electric screwdriver, and do not use force during the rotation of the accessories, otherwise, it may cause the board to crack
- Attach boards 6 to 4, insert cam locks(B) into board 4 as shown, and turn cam locks clockwise to tighten.
- Fix part(L) to board 7 with screw(M) as shown.
- Connect boards 7 to 4 with a wooden dowel(C) as shown.
- Connect boards 9 and 7 to board 8 with a wooden dowel(C)as shown.
- Please pay attention to the holes where the accessories are inserted.
- Slide board 11 into available slots as shown.
- Insert wooden dowel(C) into corresponding holes in boards 4 and 6 as shown.
- Do not use an electric screwdriver, do not use force during the rotation of the accessories, otherwise, it may cause the board to crack
- Attach board 3 to the component, insert cam locks(B) into boards 4,7 and 9 as shown, and turn cam locks clockwise to tighten.
- Insert wooden dowel(C) into corresponding holes in boards 4 and 6 as shown.
- Slide board 11 into available slots as shown.
- Insert quickfit screw(A) into corresponding holes in board 2 with screwdriver.
- Attach board 2 to the component, insert cam locks(B) into boards 9,7 and 4 as shown, and turn the cam locks clockwise to tighten.
- Slide board 10 into available slots as shown.
- Insert wooden dowel(C) into corresponding holes in boards 2,5 and 3 as shown.
- Insert quickfit screw(A) into corresponding holes in board 1 with screwdriver.
- Cover board 1 to the top of the unit, insert cam locks(B) into boards 2,5 and 3 as shown, and turn cam locks clockwise to tighten.
- Connect 2 assembled components, insert cam locks(B) into boards 2 and 3 as shown, and turn cam locks clockwise to tighten.
- Fix the backboard with part(N) and screw(O) as shown.
- Fix the anti-dumping device(R) to board 10 with part(S) and screw(Q) as shown.
- Fix part(P) to boards 9 and 12 with screw(Q) as shown.
- Insert quickfit screw(A) into board 21.
- Attach boards 23 and 24 to board 21 with a wooden dowel(C)as shown.
- Insert cam locks(B) into boards 23 and 24 as shown, and turn cam locks clockwise to tighten.
- Slide board 15 into available slots. Attach board 22 to the component with screw(D) as shown.
- Fix handle(U) with screw(V) as shown.
- Fix runner(DL) and (DR) to boards 23 and 24 respectively with screw(I) as shown.
- Stable the item by fixing the anti-dumping device(R) through part(T) to your wall with part(S) and screw(Q) as shown.
WARRANTY
WARRANTY CLAIMS
- There is a 30-day warranty for broken furniture or any other problems that do not work properly. The warranty will start from the date of purchase which must be verified by proof of purchase.
- Before making a claim, we may be able to answer your query, simply call us. Please leave your purchase order number, along with some details of the problem, if you want a replacement part. We will arrange it within 48 hours. If there is out of stock, we will reply with a shipping date.
- The product must be used per the instructions provided. For health reasons.
- For other reasons, if the furniture needs to be returned, it must be cleaned dried and operated within 30 days of receipt.
Type of Warranty Claim
- Failure to follow the furniture instructions will invalidate the warranty. Attention, please.
- Does not include damage during installation, but includes damage during transportation.
Scope of responsibility
- Shall not bear any responsibility for misuse or user damage and/or loss of parts during the installation of furniture.
- After use, the damage and scratches of the furniture are not covered by the warranty.
The Warranty Relates to All Bought in The US and Covers The Following Areas
- Sheet parts: 1 month from the date of purchase.
- Electrical parts: 1 month from the date of purchase.
RETURNS
CHANGED YOUR MIND AND NEED TO RETURN YOUR ITEM?
PLEASE FOLLOW THE BELOW INSTRUCTIONS:
- If you have purchased and have simply changed your mind, follow the retailer’s instructions for returns.
DEFECTIVE ITEMS
- If your item is defective in any way, i.e. it doesn’t work but you can’t identify why, in the first instance, please call us.
DAMAGED ITEMS
- If you receive an order with obvious shipping damage from the retailer, then we suggest the delivery is refused. If the delivery has been accepted and then shipping damage is found, please follow the specific instructions advised by the retailer.
- In all circumstances please save all packaging material and paperwork for the order.
- Please be aware that if you dispose of packaging material or attempt to return the merchandise without contacting the fulfiller, you jeopardise your chances of making a claim, and you may not receive a credit for the return.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>