Brink 310681 Sky Renovent Instructions

June 16, 2024
BRINK

Renovent Sky 300
Set/ Satz/ Set/ Kit : 310681

 310681 Sky Renovent

Replacing preheater

Important: Mounting a preheater is always possible at a Renovent Sky 300!
– Switch off the main power from the Renovent Sky 300.
– Position the preheater so that the arrow does point to the appliance and place it on the duct “From atmosphere”.
– Connect the wiring of the preheater as shown on the wiring diagram on page 2 is displayed.
– Turn on the power of the Renovent Sky 300 as well as the preheater.
– Parameter 12 must be changed to 1.Brink 310681 Sky Renovent - Mounting a
preheater

I = To dwelling
II = To atmosphere
III = From dwelling
IV = From atmosphere
Parameter Description Factory setting
--- --- ---
12 Heater 0

1 = Preheater

Wiring diagramy

Brink 310681 Sky Renovent - Wiring diagramy Renovent Sky 300

A Renovent Sky 300
B Connector for conneting preheater on the Renovent Sky 300
C Heating coil ( 1000W max.)
D Maximum safety with manual reset
E LED maximum safety; lights up when activated
F By installer on the Renovent  Sky to join connector B
G Wiring in preheater
C1 brown
--- ---
C2 blue
C3 green/yellow
C4 black

Technical information

  • Supply voltage
  • Weight
  • Duct diameter
  • Heater length
  • Overall length
  • Protection degree
  • Rated power
  • Rated current

Service

When ordering parts, in addition to the article code number, please state the type of the heat recovery appliance, the serial number, the year of production and the name of the part.

Maximum safety
Heating coil
Cable with plug 230V

Air for Life
Wethouder Wassebaliestraat 8 7951 SN Staphorst The Netherlands
P. O. Box 11 NL-7950 AA Staphorst The Netherlands
T. +31 (0) 522 46 99 44
F. +31 (0) 522 46 94 00
info@brinkclimatesystems.nl
www.brinkclimatesystems.nl

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals