Holland Green Science 10308001 Boreas Freezer User Manual

Holland Green Science 10308001 Boreas Freezer User Manual

Disclaimer

• The intellectual property rights for this manual belongs to Holland Green Science Corporation (hereinafter referred to as “the Company”).
• Products of the company are under the patent protection of China and other countries and regions (inclusive of obtained patents and patents currently under application).
• The company reserves the right to change product specifications without notice.
• The contents of the manual are subject to change without notice.
• The manual’s content must not be copied, extracted, or modified in any form without the Company’s permission.

LIMITED WARRANTY & DISCLAIMER
Products sold by the Company are intended solely for the use(s) specified by the manufacturer and are not to be used for any other purposes including, but not limited to, unauthorized commercial purposes. Buyer warrants and represents that Buyer will properly test, use, qualify, and/or validate each Product for intended use, and, to the extent authorized, manufacture and market any final articles made from the Company’s Products in accordance with the practices of a reasonable person who is an expert in the field, and in strict compliance with all applicable national, state and local laws and regulations. Buyer acknowledges and understands that the purchase of Products only conveys to Buyer the non-transferable right for only the Buyer to use the Products purchased in compliance with the applicable manufacturer’s Published User Statement, Limited User Statement, or Limited License, if any. While this manual contains certain representations of the potential dangers from the instrument or equipment, Buyer is solely responsible for conducting any research necessary to learn the hazards involved for any of its intended uses of the instrument or equipment purchased from the Company and to properly warn its customers, employees and other personnel who may be exposed to such instrument or equipment of any risks involved in using or handling the instrument or equipment.

The Company warrants that this product will operate or perform substantially in conformance with the Company’s published specifications and be free from defects in material and workmanship, when subjected to normal, proper and intended storage and usage by properly trained personnel, for the duration of the manufacturer’s warranty period set forth in this product documentation, published specifications or package inserts. If a manufacturer’s warranty period is not specified in the product documentation, published specifications or package inserts, the warranty period shall be one (1) year from the date of Bill of Sale to Buyer for equipment, and the earlier of any stated expiration dates or ninety (90) days for all other products (the “Warranty Period”). The Company agrees during the Warranty Period, to repair or replace, at the Company’s option, defective Products so as to cause the same to operate in substantial conformance with said published specifications; provided that Buyer shall (a) promptly notify the Company in writing upon the discovery of any defect, which notice shall include the product model and serial number (if applicable) and details of the warranty claim; and (b) after the Company’s review, the Company will provide Buyer with service data and/or a Return Material Authorization (“RMA”), which may include biohazard decontamination procedures and other product-specific handling instructions, then, if applicable, Buyer may return the defective Products to the Company with all costs prepaid by Buyer. Replacement parts may be new or refurbished, at the election of the Company. All replaced parts shall become the property of the Company. Shipment to Buyer of repaired or replacement Products shall be made in accordance with the Delivery provisions of the Terms & Conditions agreed to by the purchase of this product. Consumables are expressly excluded from this warranty.

Notwithstanding the foregoing, Products supplied by the Company but not manufactured by the Company are not warranted by the Company, and the Company disclaims all warranties associated with the accuracy of any original manufacturer or third-party supplier Product information, but the Company agrees to assign to Buyer any warranty rights in such Product that the Company may have from the original manufacturer or third-party supplier, to the extent such assignment is allowed by such original manufacturer or third-party supplier.

In no event shall the Company have any obligation to make repairs, replacements or corrections required, in whole or in part, as the result of (i) normal wear and tear, (ii) accident, disaster or event of force majeure, (iii) misuse, fault or negligence of or by Buyer, (iv) use of the Product in a manner for which they were not designed, (v) causes external to the Product such as, but not limited to, power failure or electrical power surges, (vi) improper storage and handling of the Product or (vii) use of the Product in combination with equipment or software not supplied by the Company. If the Company determines that Product for which Buyer has requested warranty services are not covered by the warranty hereunder, Buyer shall pay or reimburse the Company for all costs of investigating and responding to such request at the Company’s then prevailing time and materials rates. If the Company provides repair services or replacement parts that are not covered by this warranty, Buyer shall pay the Company therefor at the Company’s then prevailing time and materials rates.

ANY INSTALLATION, MAINTENANCE, REPAIR, SERVICE, RELOCATION OR ALTERATION TO OR OF, OR OTHER TAMPERING WITH, THE PRODUCT PERFORMED BY ANY PERSON OR ENTITY OTHER THAN THE COMPANY WITHOUT THE COMPANY’S PRIOR WRITTEN APPROVAL, OR ANY USE OF REPLACEMENT PARTS NOT SUPPLIED BY THE COMPANY, SHALL IMMEDIATELY VOID AND CANCEL ALL WARRANTIES WITH RESPECT TO THE PRODUCT.

THE OBLIGATIONS CREATED BY THIS WARRANTY STATEMENT TO REPAIR OR REPLACE A DEFECTIVE PRODUCT SHALL BE THE SOLE REMEDY OF BUYER IN THE EVENT OF A DEFECTIVE PRODUCT. EXCEPT AS EXPRESSLY PROVIDED IN THIS WARRANTY STATEMENT, THE COMPANY DISCLAIMS ALL OTHER WARRANTIES, WHETHER EXPRESS OR IMPLIED, ORAL OR WRITTEN, WITH RESPECT TO THE PRODUCTS, INCLUDING WITHOUT LIMITATION ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE OR USE. THE COMPANY DOES NOT WARRANT THAT THE PRODUCTS ARE ERROR-FREE OR WILL ACCOMPLISH ANY PARTICULAR RESULT.

NOTHING IN THIS MANUAL OR IN THE TERMS AND AGREEMENT AGREED TO AT THE TIME OF PURCHASE SHALL BE CONSTRUED TO PROVIDE FOR THE TRANSFER, ASSIGNMENT OR ALIENATION OF THE LIMITED WARRANTIES PROVIDED BY THE COMPANY HEREIN TO ANY OTHER PARTY OTHER THAN BUYER, INCLUDING BUT NOT LIMITED TO, SUCCESSORS, HEIRS, SUBSIDIARIES OR ANY OTHER THIRD PERSON.

THE WARRANTIES IDENTIFIED ABOVE ARE THE SOLE AND EXCLUSIVE WARRANTIES WITH RESPECT TO THIS PRODUCT AND ARE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. ALL OTHER WARRANTIES ARE EXPRESSLY DISCLAIMED, INCLUDING, WITHOUT LIMITATION, THOSE OF NON-INFRINGEMENT, MERCHANTABILITY, OR FITNESS FOR A SPECIFIC PURPOSE OR USE (WHETHER ARISING FROM STATUTE, OR OTHERWISE IN LAW, OR FROM A COURSE OF DEALING, OR USAGE OF TRADE). THIS WARRANTY IS NOT TRANSFERABLE FROM THE ORIGINAL PURCHASER TO A SUBSEQUENT OWNER. FURTHER, THE COMPANY IS NOT LIABLE IN CASES OF DELIBERATE, NEGLIGENT OR ACCIDENTAL MISUSE OF THE PRODUCTS, USE WITH INAPPROPRIATE REAGENTS OR CONSUMABLES, DAMAGE CAUSED BY DISASTER, REPAIR OR MODIFICATIONS DONE BY ANYONE OTHER THAN THE COMPANY. THE COMPANY DOES NOT WARRANT THAT THE PRODUCT WILL NOT INFRINGE THE INTELLECTUAL PROPERTY RIGHTS OF A THIRD PARTY EITHER ALONE OR IN COMBINATION WITH OTHER PRODUCTS OR IN THE OPERATION OF ANY PROCESS. THE COMPANY’S TOTAL LIABILITY FOR BREACH OF THESE WARRANTIES SHALL BE LIMITED TO THE GROSS PURCHASE PRICE FOR THE PRODUCT AS STATED IN THE RELEVANT INVOICE OR ORDER UNDER WHICH THE ACTIVITY GIVING RISE TO LIABILITY ARISES. UNDER NO CIRCUMSTANCES SHALL THE COMPANY BE LIABLE FOR INDIRECT, INCIDENTAL, CONSEQUENTIAL, SPECIAL OR PUNITIVE DAMAGES (INCLUDING LOSS OF BUSINESS OR PROFITS) UNDER ANY THEORY OF LIABILITY HEREUNDER.

For claims under the warranty please contact your local supplier. You may also send the instrument directly to manufacturer, enclosing the invoice copy and by giving reasons for the claim.

LIMITATION OF LIABILITY

NOTWITHSTANDING ANYTHING TO THE CONTRARY CONTAINED HEREIN, THE LIABILITY OF THE COMPANY UNDER THESE TERMS AND CONDITIONS (WHETHER BY REASON OF BREACH OF CONTRACT, TORT, INDEMNIFICATION, OR OTHERWISE, BUT EXCLUDING LIABILITY OF THE COMPANY FOR BREACH OF WARRANTY (THE SOLE REMEDY FOR WHICH SHALL BE AS PROVIDED UNDER THIS SECTION) SHALL NOT EXCEED AN AMOUNT EQUAL TO THE LESSER OF (A) THE TOTAL PURCHASE PRICE THERETOFORE PAID BY BUYER TO THE COMPANY WITH RESPECT TO THE PRODUCT(S) GIVING RISE TO SUCH LIABILITY OR (B) ONE HUNDRED THOUSAND DOLLARS ($100,000), WHICHEVER IS LESS.

With respect to any software products incorporated in or forming a part of the Product hereunder Buyer intends and agrees that such software products are being licensed and not sold, and that the words “purchase”, “sell” or similar or derivative words are understood and agreed to mean “license”, and that the word “Buyer” or similar or derivative words are understood and agreed to mean “licensee”. Notwithstanding anything to the contrary contained herein, The COMPANY or its licensor, as the case may be, retains all rights and interest in software products provided hereunder. See the Terms & Conditions of purchase for details regarding such license.

Safety

IMPORTANT Safety Items to be Observed.

Safety Warnings

! DANGER (may cause serious damage to property and or casualties)

1. Please carefully read this User Manual prior to operating the instrument and observe the instructions on safe operation.

2. The power source must be grounded reliably and away from any sources of electromagnetic interference.

3. Confirm that the voltage and frequency of the power supply matches the specified voltage and frequency specified prior to use.

4. The instrument should be operated on an independent power outlet.

5. Do not allow the instrument to be plugged in or unplugged whilst the power switch is in the on position.

6. Do not modify the power cord.

7. The working environment must be free of any flammable, explosive, volatile or corrosive substances.

8. The instrument is deenergised only when the power cable is disconnected from the power source.

9. This instrument is for indoor use only.

10. The instrument should be operated in a low humidity, well ventilated, dust, and water free environment, without direct sunshine or an intense magnetic, light or heat source.
    Ensure that the instrument and its accessories are free of any potential defects.

11. Ensure that the instrument is secured tightly, and only standard accessories supplied by the manufacturers are used with this instrument.
    ! WARNING (may cause property damage or personal injury)

12. Prevent water from splashing on the electrical elements of this instrument.

13. Before assembly, disassembly, cleaning or maintenance, the power source must be disconnected.
    ! ATTENTION (may affect operational performance or service life)

14. When pulling the power plug out from a power source, do not pull out using the power cord directly.

15. Only accredited and qualified professional repair technicians can open the instrument or conduct required repairs. Persons performing repairs on the instrument other than those selected or approved by the Company shall operate to void any warranty contained hereinabove for the product

16. Do NOT operate this instrument immediately after transport, due to the Compressor await 1-2 days before operating. The instrument must be used in accordance with this User Manual.

Proper Use

The instrument is designed for non-residential use and to be used in conjunction only with accessories recommended within this manual and by the manufacturer.

After Sales Support

If problems are encountered or technical support is required when installing or using the instrument, please contact serviceusa@hollandgreenscience.com

The Company may provide technical assistance and information regarding the instrument or equipment or service without charge at its sole discretion. Buyer assumes sole responsibility for any reliance on or use of such assistance and information, and the Company makes no warranty thereon.

Upon contact the following information is required:

• Product serial number (located on the instrument nameplate)
• Description of issue or problem
• Method and or operating steps you have undertaken towards resolution.
• Your contact details inclusive of telephone number and email address.

Boreas Series Freezer Introduction

Technical Specifications

Standards and Conformity

Construction in Accordance with the following Safety Standards:
UL 61010-1:2012
CSA C22.2#61010-1-12:2012
UL 61010-2-011:2021
CSA C22.2#61010-2- 011:2019
Construction in Accordance with the following EMC Standards:
EN 61010-1:2010
EN 61326-1:2013

Inspection

Unpack the equipment carefully and check for any damage which may have arisen during transport. In the event of identified damage, please contact serviceusa@hollandgreenscience.com
The package includes the following items

Item| Description| Unit|
---|---|---|---
1| IOM| PCS| 1
2| Key| PCS| 2
3| Stopper| PCS| 2
4| Ice Shovel| PCS| 1
5| Shelf| PCS| 3
6| Clip| PCS| 12

Installation Instructions

Initial Setup

• Leave a 30cm ventilation gap around all four sides of the cabinet.
• Install the instrument only on a stable and level floor surface
• When the freezer is located into the desired position, set the front castor brakes.
• The freezer must NOT be moved with the product loaded inside.

Allow adequate space in the front of the freezer for door opening. Remove all packing materials and the packing bag.

• Install the stoppers at the rear side of the machine set as per figure below.
• Do not install the instrument within small, closed or confirmed spaces.

Note: If tipped more than 45°, allow the Freezer to sit upright for 24 hours prior to Start.
Powering On

• Inspect all external components to confirm they are not damaged.
• Check the rated voltage on the nameplate
• With an empty cabinet, connect the power plug to a dedicated power socket.
• After power ‘ON’, if an alarm sounds, press the ‘Buzzer Button’ to mute the alarm. The alarm light continues to display until the temperature reaches the required setting data.
• After checking the freezer is operating as required, gradually place items into the cabinet.

Operating Instructions

**User Interface

**

1. Cooling Status Indicator
2. Defrost Indicator
3. Fan Status Indicator
4. Power Indicator
5. Keyboard Lock Indicator
6. Door open Indicator
7. Power Switch
8. Setting Key
9. Increase Key
10. Decrease Key
11. Lamp Switch
12. Mute Alarm

• Long press ‘Power Switch’ to switch ‘OFF’
• Long press ‘Power Key’ to switch ‘ON’
• Long press the Keypad ‘Lock Key’ (combination of keys 8 and 9 together) to lock and unlock the keypad. The keyboard lock LED will Light confirming that all keys are now locked.
  Press ‘Mute’ to disable the audible alarm, the alarm indicator and code continues to display

Parameter Settings
Upon power on, the screen displays the current internal temperature value.
To change the set temperature

inside temperature

Temperature Query Settings
Press key 9 to check high and low temperature record.

Review and Set Time

Alarm Codes.

During a power failure or fault a battery will activate allowing the display to continue, the power failure alarm displays ‘AUF’ and the current inside temperature will cycle on the display.
After 8 hours, the display blanks.
The power failure alarm light will illuminate continuously until the battery is fully recharged.
Error Display

If the temperature sensor alarm occurs, switch ‘OFF’ the power and check the connecting wire of the sensor.

Maintenance

Keep the instrument dry and clean in routine operations.
Clean the outer surface with a non-abrasive cleanser and only connect the power supply when the entire instrument surface is dry.
If liquid or moist solids enters the instrument, please immediately disconnect the power supply and contact serviceusa@hollandgreenscience.com

• Surface stains on the instrument should be cleaned only by a clean, soft rag and detergent.
• The power must be disconnected before any maintenance or cleaning.
• Do not clean the instrument with any corrosive cleaning solutions.
• If the instrument is left unused for a long period, switch ‘OFF’ the power and store within a dry, clean, level, and stable surface at normal temperature.

| Caution!
Before any Maintenance or Inspection, the Power Cable MUST be removed from the power socket.
---|---

Defrost
Frost may occur on the rack within the cabinet and may possibly cause a gap between the cabinet body and the door seal and reduce performance. Please remove frost only after disconnecting the power supply.

NEVER remove frost with any sharp edge object such as a knife or screwdriver.

1. Take out all items from the cabinet and store them within an alternate cabinet or container with frozen liquid carbon dioxide.
2. Disconnect the power supply.
3. Open the small doors, and keep the external door open to defrost for a moment.
4. Remove the water from the bottom of the cabinet with dry fabric cloth.
5. Start the instrument after cleaning the cabinet body.
6. Ensure the temperature is correct prior to return to the original items to the defrosted and cleaned cabinet.

Trouble Shooting

Poor Cooling Performance

• Check ambient temperature is within limits.

• Check if the external door is closed. (Check for frost on seal)

• Check if the temperature is set correctly.

• Check if the storage cabinet is near a heat source.

• When stopped temporarily due to power failure or other faults, the inside temperature of the refrigerator will rise from -40℃ to -30℃ within 1 hour.
  If power cannot be restored, relocate all stored goods to avoid damage or loss.

• Prior to storing goods confirm in that the inside temperature is in accordance with the set temperature for item storage to avoid losses caused by goods damage due to the improper temperature.

• Due to the refrigeration inertia, the instrument cannot be kept at an exact constant temperature and differences between the actual temperature and the set temperature will occur.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>