Colmi P45 Smart Watch User Manual

Colmi P45 Smart Watch

Welcome to our high-performance wristband Smart Watch which creates a thoughtful and healthy experience for you.

Device Maintenance

• Please remember the following tips when you maintain your Smart Watch:
• Clean the Smart Watch regularly, especially its inner side, and keep it dry.
• Adjust the Smart Watch tightness to ensure air circulation.
• Excessive skincare products should not be used for the wrist when wearing the Smart Watch.
• Please cease wearing the SmartWatch in case of skin allergy or any discomfort.

Schematic diagram of the main body of the Smart Watch

Power-on

• Long press the side button for 3 seconds or plug in the Magnetic charging cable to charge the Smart Watch.

Downloading and binding of Smart Watch APP

• Download and install APP
• Scan the QR code with your mobile phone to download the APP.
• For the IOS system, select APP, and storesearch Da Fit. Android system, select Google Play to download and install Da Fit. Or scan the QR code to download

Bind Smart Watch with APP

1. Click on “Add Device” to bind the Smart Watch.
2. Click on your device in the device list scanned.
3. The IOS system will show a Bluetooth pairing request and you can click on Bluetooth “Pairing” to confirm. Connect it directly to the Android system.
4. Successfully bound.

Bluetooth call connect

Android: After the APP successfully connects to the watch’s Bluetooth.

1. The phone will automatically pop up a “pairing” request, click “Allow”.
2. For some brands of mobile phone models, there is no need to pop up the pairing confirmation permission. After connecting to Bluetooth, the call function is also directly connected. After the binding is successful, you can answer and make calls on the watch.

iPhone: Enter into Settings – Bluetooth, search device and connect pair (P45_PHONE). After pairing successfully, you can make call/ answer incoming call.

Remove Bluetooth Call connection

• Android: For the Android mobile phone, the device can be disconnected from your mobile phone by simply clicking on Remove device.
• iPhone: firstly, users need to dismiss the pair, then enter into mobile phone Setting – Bluetooth, find P45_ PHONE, click the icon on the right, ignore the device, watch and mobile phone are disconnection.

Introduction of Smart Watch functions

• Power-on status
• switch the menu interfaces of the main screen, as the interfaces shown in the following;

1. Introduction of main interface functions
   After the smart bracelet and APP are first paired, the time and date of the mobile phone will be synchronized.

2. Step counting, distance and calorie
   The step-counting interface shows steps. Wear the smart bracelet on your wrist, and the smart bracelet can automatically count steps, distance and calories.

3. Sleep monitoring
   Wearing the smart bracelet at night to automatically judges whether you are in a sleep state, records deep sleep and light sleep respectively, and summarises the total sleep time to help you monitor your sleep quality. The sensor can measure your sleep quality according to the range and frequency of wrist movements when you sleep.
   Note: Because user’s sleep time and habits are different, the time of sleep monitoring is only for reference.

4. Heart rate measurement
   Enter the heart rate test interface, the motor will vibrate once after “Start measurement” and “Stop”, and the current measurement data will be displayed

5. Exercise
   Sports interface, including a variety of sports, walking, running, cycling, skipping rope, badminton, basketball, football and so on.

6. Al’s voice
   Click on the voice, and through the connection with the mobile phone, the user’s spoken language is converted into text, intelligent dialogue and intelligent interaction of instant question and answer.

7. Phone
   Turn on the Bluetooth function of your phone and smartwatch. The phone searches for the smartwatch’s Bluetooth device and initiates pairing. When both parties confirm the pairing, there will be a prompt that the connection is successful. Click the dial pad of the watch to dial and answer the phone.

8. Blood pressure
   Enter the blood pressure test interface, the motor will vibrate once after “Start measurement” and “Stop”, and the current measurement data will be displayed.
   The environment for measuring blood pressure should be quiet with an appropriate temperature. The user should rest for at least 5 minutes, and avoid tension, anxiety and emotional excitement before measurement. Repeatedly measure blood pressure for three times at the interval of 2 minutes. Record the average of three readings.

9. Blood oxygen
   Enter the blood oxygen test interface, the motor will vibrate once after “Start measurement” and “Stop”, and the current measurement data will be displayed.
   Blood oxygen saturation (SpO2) is the percentage of the volume of oxyhemoglobin (HbO2) combined by oxygen in the blood to the volume of all (Hb, hemoglobin) which can be combined, i.e., the concentration of blood oxygen in the blood.
   Note: the data measured for blood pressure and blood oxygen are for reference only, and cannot be used as the basis of relevant medical purposes.

10. Weather
    The weather page will display the current weather today, and swipe up to display the weather forecast for the next 6 days. For weather information, it needs to connect with the client end before data can be obtained. If the disconnection time is long, the weather information cannot be updated.

11. Messages
    You can view the content pushed by the message in the information interface. At most five messages can be saved. After five messages are saved, the messages displayed before will be replaced by new messages one by one.

12. Shutter
    After connecting with the mobile phone, the smart bracelet can be used as a remote controller for the mobile phone camera. Open “Photo control” in APP to “Shake” the smart bracelet and click on the icon to take a photo.

13. Music Control
    After connecting with the mobile phone, the smart bracelet can control the music player of the mobile phone. When the mobile phone plays music, you can use the smart bracelet to control the mobile phone for playing/pausing, the previous song and the next song.

14. Flashlight
    After opening, the screen will be adjusted to the maximum brightness and always on, and you can exit the interface after swiping left.

15. Game
    Three built-in games Bird, 2048 and Whack-a- Mole can help you relieve stress

16. Setting
    Click the “Settings” icon to enter the function list, which includes display (brightness, screen time, watch face, menu view, turning the wrist to brighten the screen,) sound and vibration, do not disturb, phone: off, save mode, call reset, System (restart, shutdown, factory reset), about (version, APP download)

17. Drainage
    Pull down the shortcut menu on the dial interface, enter the drainage system function, enter the drainage interface and wait for 3 seconds, the wristband will make a drainage sound, turn the speaker outlet down, and the wristband will automatically drain water, you can also shake the wristband to speed up the water droplets from Flare discharge.

Remove Device

For the Android mobile phone, the device can be disconnected from your mobile phone by simply clicking on Remove device. For Apple mobile phones after binding removal, you need to click on the symbol on the right in Setting – Bluetooth, and choose to ignore the device As shown holow-

Frequently Asked Questions (FAQs)

• Why does the Smart Watch automatically disconnect Bluetooth when the Android screen goes out?
• Lock the background APP. When the Da Fit process is cleared, the SmartWatch will be disconnected from the mobile phone.
• Set APP self-startup
• Unrestricted background operation. The Android mobile phone installed with the APP intelligently restricts the background operation by default, and the App should be set manually without any restriction.
• Why cannot the Smart Watch receive message push?
• Please confirm that you have turned on the switch for message push at the mobile phone client.
• Please confirm that messages can be displayed normally in the mobile phone notification bar. The message push on the Smart Watch is completed by reading the message from the mobile phone notification bar. The SmartWatch will not receive the message push if there is no message in the mobile phone notification bar. (You need to find notification settings in the mobile phone settings, and turn on the notification switch of WeChat, QQ, call, SMS and mobile phone client).
• Turn on the mobile phone — Settings. Enter “Notification use right” on the top search box, and re-open Da Fit.
• Why can’t take a hot bath with the Smart Watch?
• Answer: the bath water has a relatively high temperature, and generates a lot of vapour which is in the gas phase with a small molecular radius and can easily infiltrate into the Smart Watch from the shell gap. When the temperature drops down, the vapour will condense into liquid-phase droplets which will easily cause a short circuit inside the Smart Watch and damage the circuit board and then damage the Smart Watch.

Warning
Please consult your doctor before you take a new sport. The Smart Watch should not be used for any medical purpose though it may dynamically monitor the heart rate in real time.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>