EBL TB-6409 Rechargeable Battery Charger User Manual

Table of Contents

EBL TB-6409 Rechargeable Battery Charger

EBL TB-6409 Rechargeable Battery Charger

For your own safety, please read this user manual carefully before using it.

Input: DC 5V/2A
Output Voltage: DC 1.4V
Output Current: 500 mA
No-load Power Consumption: 0.3 W(Max)
Battery Charging Rate: >90%

The charger is compatible with 1/2/3/4 AA/AAA Ni-MH Ni-CD rechargeable batteries.
Smart charger with i Quick technology, charging speed up to 500mA, effectively charging batteries, save your time.
With advanced MCU control system, intelligent 6 V and-6 V cut-off charging method, the charger turns to trickle charging automatically to prevent the batteries from over-voltage, over-current and over-heat.
With LCD screen to show charging process, battery status can be easily monitored.
Powered by Micro USB or Type C input port, USB charging allows you to try more charging methods, such as charging with a power bank, 5V 2A power adapter.
If the battery voltage is between 0.4-0.9v, the charger will renovate it automatically.

Storage Temperature: -5°C-40°C
Storage Humidity: 45%-85%
Working Temperature: 0°C-35°C
Working Humidity: 35%-95°/o
Surface Temperature in Charging:
Surface Temperature of Charger: 35°C-60°C
Surface Temperature of Battery: 25°C- 60°C

Plug in the Micro USS/Type C cable and power on: LCD screens light up and show every character on screen first, then character disappears.
Make sure the battery is placed correctly so that the “+/-” pole of the battery corresponds to the “+/-” of the charger.
Charging status: Independently show the charging status of each battery in the form of battery icon.
If the charging is abnormal (the positive and negative poles are placed conversely; the battery is broken), the corresponding icon will flash.

Charging status

|

Abnormal charging

---|---

≤333/o flashing

|

≤ 66% flashing

|

100% fully charged

|

keeping flashing

The charger is ONLY designed for AA/AAA Ni-MH Ni-CD rechargeable batteries. Please DO NOT put any other types of batteries in this charger, especially alkaline batteries.
Please use the power cable provided by EBL. Recommended to charge the battery with 5V/2A power adapter.
Place the batteries into the charger correctly by making sure the +/- pole of battery matches the +/- pole of the charger.
The charger can charge each battery independently.
When non-rechargeable batteries are put in, or there’s short-circuit situation, the whole LCD screen will flash all the time.
New battery will reach the best performance after using 2-3 times.
Battery power will lose because of long-time storage. Please charge the battery fully if it is not used for long time.
It’s normal that the battery becomes hot while charging. The temperature will cool down to normal later, please feel free to use it.
Please note that Micro USB and Type C input ports can not be simultaneously powered on.

Turn off the charger and take the batteries out after charging i completed.
DO NOT disassemble and reassemble the charger, or it may cause short-circuit.
DO NOT charge batteries whose cover are damaged, or it may cause short circuit and fire hazard.
DO NOT charge non-rechargeable batteries. It might cause battery leakage, battery explosion, personal injuries, etc.
DO NOT put anything on the charger while charging batteries, it will accumulate heat to cause fire hazard.
Indoor use only, keep it away from direct sunlight and moshing-temperature environment.
Children should not use this charger without any adult’s superv1s1on.
Store this charger out of reach of children.