SANUS CCS2K On Wall Cable Concealer Owner’s Manual
- June 16, 2024
- SANUS
Table of Contents
SANUS CCS2K On Wall Cable Concealer
Product Information
ON WALL CABLE CONCEALER
Model: CCS2K, CCS3K
The ON WALL CABLE CONCEALER is a cable management solution that allows you to neatly conceal and organize cables on your wall. It includes cover strips, connectors, and various tools to help you achieve a clean and professional- looking cable setup.
Specifications:
- Cover Strips Quantity: 3
- Connectors Quantity: 3
- Connector Shapes: Outside elbow, Inside elbow, Flat elbows
- Tools needed: Level, Tape Measure, Phillips Screwdriver, Paint Brush
- Surface: Paintable to match your wall
- RoHS compliant
Product Usage Instructions
Step 1: Prepare the Wall
Clean the wall surface using a damp cloth to remove any dust or dirt. Ensure
that the surface is dry before proceeding.
Step 2: Measure and Cut
Measure the length(s) of the cables you want to conceal. Use a tape measure to
accurately determine the required length. Cut the cover strips to match the
measured length(s) using a sharp tool.
Step 3: Plan the Placement
Before adhering the cover strips to the wall, plan the placement by verifying
the spacing needed between the cover strips and connectors for proper fit.
Ensure that there is enough space for the cables to fit comfortably.
Step 4: Adhere the Cover Strips
Peel off the liner from the adhesive side of the cover strips.
Press firmly to adhere the cover strips to the wall in the desired position.
Make sure to align the cover strips horizontally for a neat appearance.
Step 5: Attach Connectors
Attach the connectors to the cover strips to create cable pathways. Use the
provided connectors such as outside elbow, inside elbow, and flat elbows to
route the cables as needed. Connectors can be easily inserted into the cover
strips.
Step 6: Paint (Optional)
If desired, you can paint the surface of the cover strips to match the color
of your wall. Use a paintbrush and apply paint evenly over the cover strips.
Allow the paint to dry completely before handling.
FAQ:
Q: Can I paint the cover strips?
A: Yes, the surface of the cover strips is paintable.
Use a paintbrush to apply paint evenly and match the color of your wall.
Ensure that the paint is dry before handling.
Q: How many connectors are included?
A: The package includes three connectors in a variety of shapes,
including outside elbow, inside elbow, and flat elbows.
Q: What tools do I need for installation?
A: You will need a level, tape measure, Phillips screwdriver, and a
paintbrush (if you choose to paint the cover strips).
Q: Can I remove the cover strips without damaging the wall?
A: Yes, the cover strips can be removed without causing damage to the
wall. Gently peel off the cover strips from one end, pulling slowly and
evenly.
ON-WALL CABLE
CONCEALER
Model CCS2K, CCS3K
OWNERS GUIDE
Included
Tools needed
WARNING: Not to be used to extend hard-wired (permanent) electrical wiring. Two power cord maximum capacity. Do not loop cord.
INSTRUCTION
Measure location(s)
TIP: BEFORE adhering to the wall, verify the spacing needed between strips a and connector(s) b for proper fit.
Cut to length(s)
Secure cables
Peel Liner from Tape
Press firmly in place
Attach Connectors
Legrand AV Inc. and its affiliated corporations and subsidiaries
(collectively, “Legrand”), intend to make this manual accurate and complete.
However, Legrand makes no claim that the information contained herein covers
all details, conditions, or variations.
Nor does it provide for every possible contingency in connection with the
installation or use of this product. The information contained in this
document is subject to change without notice or obligation of any kind.
Legrand makes no representation of warranty, expressed or implied, regarding
the information contained herein. Legrand assumes no responsibility for
accuracy, completeness or suciency of the information contained in this
document.
©2021 Legrand AV Inc. All rights reserved. SANUS is a Legrand brand. SANUS and
the SANUS logo are trademarks of Legrand.
Made in USA.
Legrand AV Inc.
6436 City West Parkway
Eden Prairie, MN 55344 USA
1-800-359-5520
SANUS.com
RoHS compliant
Conforme con RoHS