HOMCOM 831-599V02ND Rattan Bedside Table Instruction Manual
- June 16, 2024
- HOMCOM
Table of Contents
IN230300365V02_GL
831-599V02
831-599V02ND Rattan Bedside Table
Tools Recommended
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
Dear customer,
Thank you for purchasing this product. So that your appliance serves you well,
please read all the instructions in this user’s manual. If you have any
questions, please contact our customer care center,Our contact details are
below:
| Country | Phone | |
|---|---|---|
| us | 001-877-644-9366 |
[email protected]
CA| 416-792-6088|
[email protected]
UK| 0044-800-240-4004|
[email protected]
DE| 0049-0(40)-88307530| [email protected]
FR| 0033-1-84166106| [email protected]
ES| 0034-931294512| [email protected]
PT| 0034-931294512| [email protected]
IT| 0039-0249471447| [email protected]
USING CAM LOCKAND QUICKFIT
UICKFIT:Tighten quickfit until shoulder is flush with panel.Do not overtighten or undertighten.
CAM LOCK:When fitting cam lock, ensure starting position is correct before you
insert connecting quickfit.
Quickfit head should be in the centre of the cam lock when the two panels are
joined.
Turn cam lock clockwise to tighten.
HINGE ADJUSTMENT GUIDE
It may be necessary to adjust the hinges so that the doors align.Use the
instructions below as a guide.
To adjust the door vertically loosen the screw asshown and move up and down as
needed.
To adjust the gap from the door to the main frame turn the screw clockwise or anti-clockwise as needed.
To adjust the door laterally adjust the screw as shown by turning clockwise or anti-clockwise.
Please fix other screws
PARTS
HARDWARE
NOTE
Do not confuse similar screws.
Done
This is anti-dumping belt that fix the product to the wall and it can be used or not follow your needs.
If it is a solid wall, please use expansion and self-tapping screws, if it is a wooden wall, only use self-tapping screws, please do not overtighten the screws
Imported by Aosom LLC
27150 SW Kinsman Rd Wilsonville, OR 97070 USA
MADE IN CHINA