1MORE EC305 PistonBuds User Guide
- June 16, 2024
- 1more
Table of Contents
- 1MORE EC305 PistonBuds User Guide
- 1MORE EC305 PistonBuds
- * Functions of the 1MORE MUSIC APP may vary with different devices or
- Limitations:
- WEEE
- Tips
- Safety Information
- FCC
- Caution!
- IC
- FAQ
- Safety Caution
- Read More About This Manual & Download PDF:
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
1MORE EC305 PistonBuds User Guide
1MORE EC305 PistonBuds
To change a song or control volume, please set up on 1MORE MUSIC APP or
operate on paired mobile phone or device.
Above functions are available for either earbud in individual or stereo Custom
setup is available on the APP.Above functions may vary with different devices
The default setting of the headphones is “ANC Off”, long press the touch
control area of the earbuds to switch between “ANC-Off”, “ANC-Strong” and
“Pass-through”.
“ANC-Mild”, ”WNR (Wind Noise Resistance), “ANC-Adaptive” options are available
via 1MORE MUSIC APP.
Once the Listening mode has been set up in the APP, they will be memorized by
the headphones allowing you to switch modes based on your settings.
Spatial Audio1MORE Spatial Audio breaks through the limitations of devices,
systems, and audio formats, creating a more immersive and realistic listening
enjoyment.Low-Latency Gaming Mode
Turn on the gaming mode to sync up audio and video, reducing the latency to as
low as 80ms. Available via APP.
-
If only one earbud can be connected to the device, please put the two earbuds back into the case and triple tap the pairing button, then click “1MORE PistonBuds PRO Q30” in the device pairing list to connect to your
-
Clear The Pairing Records:
Put both Left and Right earbuds into the case, press and hold the pairing button for 8 seconds, the pairing records will be cleared. -
OTA Firmware Update:
It can be synchronously upgraded via the 1MORE MUSIC APP while the Left and Right earbuds are connected to each other with at least 50% battery.
* Functions of the 1MORE MUSIC APP may vary with different devices or
operating systems. For more details, please contact our customer service.
1MORE (1) Year Limited Warranty
1MORE warrants to the original retail purchaser that this product is to be free from defective materials and workmanship for a period of one year from the date of purchase if it is properly used and maintained. If this product proves defective in either material or workmanship, 1MORE, at its option, will (a) repair the product with new or refurbished parts, or (b) replace the product with an equivalent new or refurbished product, at no charge for parts or labor. If the product model is no longer available and cannot be repaired effectively or replaced with an identical model, 1MORE at its sole option may replace the unit with a current model of equal or greater value. In some cases, modification to the mounting surface may be required where a new model is substituted. 1MORE assumes no responsibility or liability for such modification. TO OBTAIN A REPAIR OR REPLACEMENT UNDER THE TERMS OF THIS WARRANTY, PLEASE RETURN TO THE ORIGINAL DEALER FIRST AND THE ORIGINAL DEALER SHALL REPAIR THE PRODUCT WITH NEW OR REFURBISHED PARTS OR REPLACE THE PRODUCT WITH AN
EQUIVALENT NEW OR REFURBISHED PRODUCT.
You will be required to submit a proof of purchasing details, including but
not limited to a receipt or sales invoice.
Return shipping for exchanges/repairs is the sole responsibility of the
original retail purchaser.
Limitations:
- This limited warranty does not cover the failure of the product resulting from improper installation, misuse, abuse, accident, neglect, mishandling, or wear from ordinary use or environmental
- This limited warranty does not cover cosmetic damage, including paint damage, or consequential damage to other components or premises which may result for any reason from the failure of the
- This limited warranty is null and void for products not used in accordance with 1MORE’s
- This limited warranty is null and void for products with altered or missing serial numbers and for products not purchased from an AUTHORIZED
- This limited warranty terminates if you sell or otherwise transfer this product to another
We Appreciate Your Business
We know you will enjoy new 1MORE headphones as much as we do. At 1MORE, we value your satisfaction. If you would like more details on this product or any of our other products, please visit us online by scanning the QR code. Go to www.1more.com and sign up for VIP, and 1MORE will treat you like one.
WEEE
All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by
handing over your waste equipment to a designated collection point for
therecycling of waste electrical and electronic equipment, appointed by the
government or local authorities. Correct disposal and recycling will help
prevent potential negative consequences to the environment and human health.
Please contact the installer or local authorities for more information about
the location as well as terms and conditions of such collection points.
Your 1MORE retailer will advise you of the correct way of disposal in your
country.
Tips
- Please read this instruction manual carefully and retain for future
- Please fully charge the battery before first
- If the headphones have been unused for more than 3 months, we recommend that you charge This will improve battery capacity.
- Only use chargers that are FCC (Federal Communications Commission)
- In dry environments, static electricity may numb your This is not related to the quality of the product.
Safety Information
- Never disassemble the There are no user-serviceable parts inside.
- Do not expose the headphones to temperatures below 32 °F (0 °C) or to temperatures above 113 °F (45 °C).
- Do not use the headphones in a thunderstorm storm. This could prevent the headphones from working properly, and also increase your chance of being electrically
- Do not use oil or any volatile liquid to clean this
- Do not listen at high volumes for extended periods of
- Do not use the headphones in Do not use the headphones any time it would be dangerous to be unaware of noises around you.
- Adult supervision is required for children of age 6 and
FCC
This device complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
Caution!
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue.
Device types EC305 (FCC ID: 2ASDI-EC305) has also been tested against this SAR
limit.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate
radiofrequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
IC
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:(1) this device may not cause
FAQ
-
Why the headphones cannot be turned on?
Check if your headphones have enough battery life. If not, please charge them for at least 30 minutes. -
Why the headphones cannot play music after successfully connecting to my Android device?
After pairing successfully, on the Bluetooth menu of your device, tap the icon on the right of your device name and make sure the “Media Audio” option is on. -
Why there is no sound from the headphones while making phone calls after successfully connecting to my Android device?
After pairing successfully, on the Bluetooth menu of your device, tap the icon on the right of your device name and make sure the “Phone Audio” option is on. -
Why the Bluetooth connection is not stable and causes some interruptions?
- Try shortening the distance between your headphones and Avoid solid barriers in between.
- Please keep away from strong interference sources, such as Wi-Fi and
- Please make sure the Bluetooth antenna of your device is not
- Why some control functions do not match those in the manual while using third party music/video player Apps?
Your operating system and the third party music/video player apps may have different settings for the control functions. We recommend that you use the music/video player apps that your device has originally provided.
- For more detailed product FAQs, please visit the product support section under www.1more.com
Safety Caution
Do not expose batteries or battery packs to excessive heat such as sunshine, fire or the like.
Tiinlab Corporation hereby declares that this product is in compliance with
the essential requirements and other relevant provisions of Directive
2014/53/EU and all other applicable EU directive requirements. The full text
of the EU
declaration of conformity is available at the following internet
address:www.1more.com.
Operation Frequency/Max. EIRP: 2400-2483.5MHz, Max. EIRP is 6.93dBm.
The specifications are acquired from laboratory tested data.
- The playback time, tested under the laboratory condition of AAC format and 50% volume, may vary with different device setting, environments, usage and other factors.
Read More About This Manual & Download PDF:
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>