VANISH 5310 Treestand Carry Straps Instruction Manual
- June 16, 2024
- VANISH
Table of Contents
VANISH 5310 Treestand Carry Straps
USING INSTRUCTION
HOW TO ATTACH CARRY STRAPS TO YOUR TREESTAND
Before attaching to your treestand, remove the web strap from buckle and re-
thread as shown below (Fig. A & B). This will allow the webbing to lock into
the buckle.
Step 1: Thread the short end of the web strap through the bottom side of the platform on the stand (Fig. D) and through the buckle strap to lock in place
Step 2: Unbuckle the webbing from the shoulder strap (Fig. J) and loop
buckle through the bottom side of the platform on the treestand (Fig. K). Then
thread buckle through the webbed loop on the strap (Fig. L).
Step 3: Attach the buckle back to itself to create the backpack strap
(Fig. N).
Step 4: Repeat steps on the other side (Fig O).
Note: ensure you are attaching the backpack straps to the bottom side of the platform on your treestand.
FABRIC CONTENT
100% Polyester, Exclusive of Trim
CARE AND USE
Spot clean only with a damp cloth, air dry.
Ensure the fabric is completely dry before storing
SEE THE FULL TREESTAND GEAR LINEUP AT BYALLEN.COM
ALLEN Company, Inc. / 609 South 104th St., Louisville, CO 80027
WARNING: Cancer and reproductive harm – www.P65Warnings.ca.gov