NEXTORCH UT41 Multi Function Rechargeable Signal Light User Manual
- June 16, 2024
- NEXTORCH
Table of Contents
NEXTORCH UT41 Multi Function Rechargeable Signal Light User Manual
SPECIFICATIONS
ANSI / PLATO-FL1 | Light Outpu | Run Time |
---|---|---|
Constant on | Flash | |
Red Light | 3 lm | 18 h |
Blue Light | 2 lm | 16 h |
Yellow Light | 9 lm | 20 h |
Green Light | 12 lm | 18 h |
White Light | 20 lm | 12 h |
IR Light | 850 nm | 13 h |
Red & Blue Flash | — | — |
Impact Resistance | 2 m | |
Submersible | IPX8,2 m | |
Weight and Dimensions | Weight: 29 g / 1.02 oz Size: 62 mm (Length) × 27 mm |
(Width) × 25 mm (Height)
Material| Light Source: White / Red / Blue / Green / Yellow / IR LED sPC
Battery| Built-in 500 mAh Rechargeable Battery
Above tested specifications are strictly based on the standard of ANSI / PLATO-FL1. We tested UT41 with built-in 500 mAh Li-ion battery in 22 °C ± 3 °C . The specifications might be different when using a different battery or testing in a different environment.
FEATURES
- 6 light sources and 13 modes are able to indicate different grouping, personal Identify Friend or Foe (IFF) beacon, quick positioning and security warning.
- Various Carry Options allow mounted on a MOLLE or helmet with ARC rails for fast, secure installation and easy removal.
- Dual Side Switches for light sources or modes selection, clear operation logic andnon-interference.
- The transparent shell ensures all-round signal recognition and identification.
- USB Type-C rechargeable for convenient charging, environmentally friendly and efficient.
INSTRUCTION
-
ON / OFF
Press to turn on, press again for more than 3s to turn off. -
Mode Selection
Press to turn on, press again within 3s to switch Flash→ OFF→ Constant ON (In the red and blue flashing state, only ON/OFF is switched) -
Lights Selection
Press when the light in on
Red → Blue → Yellow → Green → White → IR → Red & Blue Flash -
Light Source Memory
When reactivated, the light will automatically access the previous memorized light source. -
Mounting Method①
ARC Rail Clip
-
Mounting Method②
Back Clip
NOTE: If IR light is turned on, please switch to other light sources and then turn it off.
BATTERY INDICATOR
-
USB Type-C Rechargeable
Charging time about 2 hours. Red light: charging in progress. Blue light: fully charged -
Battery Capacity Indicator
Battery indicator will light up for 2s only when turn on the light.
NOTE: When the IR light is turned on, the power indicator light will not light up.
Blue light: 75% ~100%
Blue flash: 50% ~75%
Red light: 25% ~50%
Red flash: 0% ~25%
MAINTENANCE
- Being infected with seawater or any corrosive chemicals, please rinse immediately with clean water.
- Please fully charge the battery before first use; if left unused for a long time, recharge every three months.
- The product uses a non-removable built-in battery. Do not replace the battery yourself to avoid damage to the product battery
WARRANTY
- NEXTORCH offers 5-year warranty.
- NEXTORCH warrants our products to be free from any defects in workmanship and / or material, we will replace or return faulty item. NEXTORCH reserves the right to replace similar products if original one is discontinued.
- The warranty excludes other accessories, but rechargeable batteries are warranted for 1 year from date of purchase.
- Any accessories or products are not covered in the warranty, NEXTORCH can repair for users with reasonable fee.
- Please scan the below QR code and access to NEXTORCH website
(www.nextorch.com) to register your purchasing.
Email us info@nextorch.com
Call us: 0086-662-6602777
Or contact local dealer
CONTACT WITH NEXTORCH DESIGNER
In order to improve NEXTORCH , we appreciate you could offer our designers
your after-use feedback and creative suggestions by scanning the following QR
code. Thank you!
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>