YRYG 2308178822-11 LED Dazzling Alarm Clock Instruction Manual

YRYG 2308178822-11 LED Dazzling Alarm Clock

OVERVIEW

Function Overview

• HD LED Display
• 12/ 24-Hour Format Switch
• Time and Day of the Week on the Same Screen Alarm Clock, Snooze Function
• Memory Function (2032 Coin Cell Battery Installed) Atmosphere Light Function
• Type-C Port
• Alarm Volume Setting

Product Installation

1. Install the 2032 button battery in the battery compartment according to the “+, – ” pole direction, and cover the lid.
2. Plug the Type-C end of the power cord into the “INPUT 5V 1A” port, printed on the product, and plug the USB end into the USB 5V power supply port.
3. Tear off the protective film on the surface of the screen.

Clock Setting Section

Time Setting

1. In time display mode, long press “TIME SET” button for 3 seconds to enter the time setting;At this moment, HOUR digits flashes, press” +” or “- “button to adjust the hour; Press “TIME SET”button again to enter the minute setting, When MINUTE digits flash, press” +” or “- ” to adjust the minute.
2. Press “TIME SET” button again, Week digits flash, press ” +” or “- ” to adjust to the correct Wednesday.
3. Press ‘TIME SET” button again to enter the snooze time setting, Snooze Time digits flash, press ” +” or”- ‘ to adjust snooze time (5-60 minutes).
4. Press “TIME SET” button to exit the setting and return to the time display.
   NOTE: Before setting the time, pay attention to whether AM (morning) / PM (afternoon) setting is correct. Short press “TIME SET” to switch 12/24 hours format, the corresponding AM/PM will be light on/off.

Alarm Setting

1. In the time display mode, long press the “AL 1. SET button (icon for 3 seconds to enter the alarm setting; at this time, the alarm 1 (icon )and Hour digits flash, press ” +” or “- “to adjust the hour
   Press “AL1.SET” button (icon ) again to enter the minute setting, when the Minute digits flash, press “+” or ‘- ” to adjust the minute.

2. Press “AL1.SET” button (icon ) to enter the alarm mode setting, and press ” +’ or “_ ” to select alarm mode

Usage of Alarm and Snooze

1. In the time display mode, a short press button to turn on or off the alarm (alarm icon lights up when the alarm is on ). When the alarm function has been turned on and the set alarm time is reached, it will ring for 2 minutes.
2. When the alarm goes off, press button to suspend the alarm, and it will enter the state of snooze. The alarm icon flashes until the set snooze time is up, clock will alarm again.
3. When the alarm goes off, press any button except to stop the alarm.

Clock Display Color Setting

In clock display mode, short press button to set the favourite clock display colour, a total of 11 light colour display modes.

Clock Display Brightness Setting
In time display mode, short press ” Brightness “Setting button to adjust the display brightness (3 levels of brightness adjustment, the last level for the screen off function).

Clock Night Brightness Setting

• In time display mode, press” button for 3 seconds to enter the night mode setting, Now press ” +” or”-” to turn on or off the night mode.
• Then press “button again to exit the setting and return to the time display
• When night mode is on and the display brightness is high, the display will automatically darken at night (18:00-6:00).

Alarm Volume Setting

• In the time display interface, short press ” ” button to switch the alarm clock to ringing loud(db95)/low(db55), after the setting is done, short press “ ” button to return to the time interface, or automatically return to the time interface after 10 seconds of ringing.

Mood Light Setting Section

• In the time display interface, short-press press “ ” button to turn on the mood light, long press the button for 3 seconds to turn off the mood light.
• When the mood light is on, short-press press button to change the color mode of the mood light, short press ” +” or “-” to change the light brightness.

USB Power Supply

In the normal use process of the product, a USB port allows you to charge(slow charging) or power external devices such as cell phones.
NOTE: Please use a 5V 1A or 2A adapter, do not use any adapter higher than the parameter above

Thank you for purchasing this product
For your better experience
Please read and keep this manual carefully.

Environmental Protection

• Electronic products disposal instructions
• If the product is damaged and needs to be recycled. Please send the product to the nearest recycling division.

Please read this manual carefully for the first time to get the best experience of using this product

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>