ECOWITT Generic Gateway Console Hub Configuration User Guide

Table of Contents

Specifications

Quick Start Guide

Install the Ecowitt app on your mobile phone.
Make sure location and Wi-Fi services are enabled on your mobile phone.
Disable the cellular network data service on your mobile phone during the setup process (if using a mobile phone to run the ecowitt app).
Tap the menu at the top left corner of the app.
Select “Weather Station” from the menu.
Select “+ Add a New Weather Station” to initiate the Wi-Fi provisioning process.
Follow the instructions provided by the app.
If you encounter any issues, please contact our customer service department for assistance.

SETUP Via Embedded Webpage

Activate configuration mode on the weather station. (If you don’t know how to activate it, please refer to the APP page on Wi-Fi provisioning.)
Use your mobile phone to connect to the Wi-Fi hotspot from your weather station.
Open your mobile phone browser and enter “192.168.4.1” to open the embedded web page.
The default password is empty, so tap “Login” directly.
Go to “Local Network” and enter your router’s SSID and Wi-Fi password.
Click “Apply” to save the settings.
Go to “Weather Services” and copy the MAC address.
Return to the Gateway provisioning on the mobile app.
Choose “Manually Adding” and enter the Device Name.
Paste the copied MAC address to save the configuration.

FAQ

Q: What should I do if I encounter issues during the setup process?
A: If you encounter any issues during the setup process, please contact our customer service department for assistance. They will be able to provide further guidance and support.

ECOWITT-Generic-Gateway-Console-Hub-Configuration-1

Install the “ecowitt” APP. Make sure you have the app with location and Wi-Fi services enabled.
Disable the cellular network data service on your mobile phone during the setup process (if you are using a mobile phone to run the ecowitt app).
Tap “menu” at the top left corner, then go to “weather station,” and select “+ add a new weather station” to initiate the Wi-Fi provisioning process.
Follow the instructions provided by the app, and if you encounter any issues, please contact our customer service department.

If you are unable to configure the device network settings using the mobile app, we recommend using the SETUP Via Embedded Web page on next page.

Activating configuration mode on weather station. (If you don’t know how to activate, please read on APP page Wi-Fi provisioning.).
Use your mobile phone to connect to the Wi-Fi hot spot from your weather station.
Go to your mobile phone browser, and enter 192.168.4.1 to open the embedded web page. (The default password is empty, tap Login directly. ).
Local Network -> Router SSID -> WIFI password -> Apply.
Weather services -> Copy “MAC”.
Return “Gateway provisioning” to choose “Manually adding” on mobile app. And then enter “Device Name” and paste “MAC” to save.