JVC XL-MV35TN Video CD Player Instruction Manual

VIDEO CD PLAYER
XL-MV35TN

XL-MV35TN Video CD Player

INSTRUCTIONS
For Customer Use:
Enter below the Model No. and Serial No. which are located either on the rear, bottom or side of the cabinet. Retain this information for future reference.
Model No. ……………………
Serial No. …………………….
LVT0023-001A
[ U, UF ] Warnings
IMPORTANT for the U.K.
DO NOT cut off the plug for this equipment. If the plug fitted is not suitable for the power points in your home or the cable is too short to reach a power point, then obtain an appropriate safetyapproved extension lead or consult your dealer.
BE SURE to replace the fuse only with an identical approved type, as originally fitted.
If nontheless the plug is cut off, remove the fuse and dispose of the plug immediately, to avoid a possible shock hazard by inadvertent connection to the power supply.
If this product is not supplied fitted with a plug then follow the instructions given below:
IMPORTANT.
DO NOT make any connection to the terminal which is marked with the letter E or by a safety ground symbol or coloured green or green/yellow.
The wires in the lead on this product are coloured in accordance with the following codes:
Blue: Neutral
Brown: Live
As these colours may not correspond with the coloured markings identifying the terminals in your plug proceed as follows:
The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black.
The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red.
IF IN DOUBT – CONSULT A COMPETENT ELECTRICIAN.
Caution –– POWER switch!
Disconnect the plug to shut the power off completely. The POWER switch in any position does not disconnect the unit from the power source. The power can be remote controlled.
CAUTION
To reduce the risk of electrical shock, fire, etc.:

1. Do not remove screws, covers or any parts.
2. Do not expose this appliance to rain or moisture.

IMPORTANT FOR LASER PRODUCTS
LABELS

1. CLASSIFICATION LABEL PLACED ON REAR ENCLOSURE
2. WARNING LABEL PLACED INSIDE THE UNIT

CLASS 1
LASER PRODUCT
DANGER: Invisible laser radiation when open and interlock failed or defeated. AVOID DIRECT EXPOSURE TO BEAM.

1. CLASS 1 LASER PRODUCT
2. DANGER: Invisible laser radiation when open and interlock failed or defeated. Avoid direct exposure to beam.
3. CAUTION: Do not open the top cover. There are no user service- able parts inside the Unit; leave all servicing to qualified service personnel.

We would like to thank you for purchasing one of our JVC products. Before connecting this unit to the wall outlet, read the instructions carefully to ensure that you obtain the best possible performance. If you have any questions, consult your JVC dealer.

GENERAL INFORMATION

Care and handling of compact discs
How to handle CDs
When handling a compact disc, do not touch the surface of the disc (reflective silver side –– the side without the label).
Since compact discs are made of plastic, they are easily damaged. If a disc gets dirty, dusty, scratched or warped, the sound will not be picked up correctly and, in addition, such a disc may cause the CD player to malfunction. Care of the label side
Do not damage the label side, stick paper or use any adhesive on its surface.
Storage
Make sure that discs are kept in their cases. If discs are piled one on top of another without their protective cases, they can be damaged. Do not put discs in a location where they may be exposed to direct sunlight, or in a place where the humidity or temperature is high. Avoid leaving discs in your car!
Maintenance of discs
If there are fingerprints or dirt adhering to a disc, wipe it with a soft dry cloth, moving from the center outwards.
If a disc is difficult to clean, wipe with a cloth moistened with water. Never use record cleaners, petrol, alcohol or any anti-static agents. CAUTION
Sometimes during play noise or images may be garbled. This is sometimes due to the disc. (It may not be up to industry standards.) These symptom are caused by the discs, not by the malfunction of the Player.
Which compact discs can be used?
Many types of compact discs are sold for a variety of uses. The Video CD Player can play the following compact discs:

• Video CD
  for audio and video (moving picture) reproduction, including multiplex sound.

• Video CD with Playback Control function
  featuring menu-type operation and super-fine still pictures for audio and video (moving picture) reproduction, including multiplex sound.
  PlayBack Control

• CD Graphics (CD-G)
  for audio and video (still picture) reproduction, including multiplex sound.

• Digital Audio CD
  including single discs
  for audio reproduction.

CDs you can’t play back
Do not play back CD-ROMs, DVDs, or CD-is on this equipment. Doing so may generate a noise which can damage your speakers.
Using the remote control
The remote control is ready to use when its batteries are installed properly.
To use it, point its infrared light-emitting window toward the display window of the player and press a button. The operating range of the remote control is up to about seven meters in front of the player and within about 30 degrees to each side –– with nothing between the remote control and the player interrupting the beam path.
If pressing a button on the remote control does not produce any response, check to make sure it is pointed correctly and try again. If it still does not function, check the batteries.

BEFORE USING FOR THE FIRST TIME

Basic connections

The Video CD Player must be connected directly to a television set or an amplifier that is connected to a television or monitor. The television set or the amplifier must have audio input jacks for right and left channels and a video input jack.
Select a level, dry location free of dust and vibration, having a temperature maintained between 5 and 35°C (41 and 95°F).
Connecting the player to a TV or amplifier using the Audio Video cord
First connect the Audio Video cord — before connecting the AC power cord.
Firmly insert the yellow pin plug of the Audio Video cord in the yellow VIDEO OUT jack on the rear panel of the player; the red pin plug in the red AUDIO OUT (RIGHT) jack; and the white pin plug in the white AUDIO OUT (LEFT) jack. (The RIGHT and LEFT output jacks are for the right and left audio channels.)
Then make sure that the television, amplifier or receiver is turned off, disconnect the AC power cord, and firmly insert the pin plugs at the other end of the Audio Video cord into the matching video and audio INPUT jacks. Video out select
Set the VIDEO OUT SELECT switch on the rear panel to NTSC, PAL, or PAL AUTO mode according to your television system.
NTSC ……………….. for NTSC exclusive TV
PAL ………………….. for PAL exclusive TV
PAL AUTO ………… for Multisystem TV
PAL AUTO detects the formula of the disc (NTSC/ PAL) automatically and plays the image on the screen correctly.
Notes

• When you play an NTSC disc in PAL AUTO mode on a PAL exclusive TV, the image may be distorted. If the signal doesn’t synchronize, change the mode to “PAL”.
• Select the mode before you play the disc. If you change the mode during play, images may get distorted. In this situation stop the player and reset the mode.
• When you play an NTSC disc in PAL AUTO mode on a Multi system TV, the image may blink for a moment. This symptom is caused by the Player detecting the formula of the disc, not by a malfunction of the Player.

Connecting the power cord
IMPORTANT (not applicable for China)
Check the setting of the * LINE VOLTS switch on the rear panel of the player.
Change the setting if the switch is not set for the main voltage supplied to your home.
After the audio-video connectors had been connected, insert the female end of the power cord firmly into the AC POWER CORD socket located on the rear panel of the player. Then insert the male end of the power cord into the wall outlet.
When the power cord is connected, the STANDBY indicator on the left-hand side of the player’s front panel comes on. [See “overview of Controls” for a description of the controls on the player.]

Installing batteries

Putting batteries in the remote control
The battery compartment is located on the back of the remote control.

1. Insert a finger in the recess under the battery compartment cover, and pull off the cover.
2. Place the two accessory R6P (SUM-3)/AA (15F) batteries in the remote control according to the polarity markings (“+” and “–”) inside the compartment and on the batteries.
3. Insert the two tabs of the cover in their respective slots, and snap the cover in place.

The batteries last about one year with normal use. If function of the remote control become erratic, replace the batteries.
Precautions for the safe use of batteries
Observe the following precautions for the safe use of batteries. Their life will be shortened, they may burst or their contents may leak if they are used improperly.

• Remove batteries from the remote control if it is not going to be used for a long period of time.
• Remove dead batteries and dispose of them properly.
• Never leave dead batteries lying around, take them apart, mix them with other refuse, or throw them into an incinerator.
• Never touch liquid that has leaked out of a battery.
• Do not mix new and old batteries, or batteries of different types, when replacing them.

OVERVIEW OF CONTROLS

The following is an explanation of the the basic function of controls on the front panel of the Player and the remote control. The function of some controls may be restricted in actual use depending on the on-going operations. The remote control has twelve (12) unique function buttons in addition to those on the player. Left front panel of the Player
(Controls marked (R) have equivalents on the remote control.)

1. POWER button (R)
   Turns the power on and off.

2. STANDBY indicator (Red)
   Lights when the power cord is connected and the power is turned off. The STANDBY indicator is not lit when the player is turned on.

3. KEY CONTROL button (R)
   Transposes the music key.
   DOWN b button: used to flatten by a half tone.
   NORMAL button: returns to original key tone.
   UP # button: used to sharpen by a half tone.

4. MODE switch
   Switches the KARAOKE/NORMAL/PBC OFF mode.
   KARAOKE mode: one track playing mode.
   NORMAL mode: continuous plural tracks playing mode. Required also for the Playback Control (PBC) function.
   PBC OFF mode: inhibits the Playback Control (PBC) function of the video CD.

5. SPATIALIZER button (R)
   Changes the sound mode. (See page 13.)

6. MPX button (R)
   Activates the multiplex function, which switches to NORMAL (stereo), L-ch monaural and R-ch monaural.

7. DIGITAL ECHO knob
   Adjusts the degree of the echo effect for the microphone voice (1 through 3).

8. MIC1 to MIC3 knobs
   Adjusts volume of the microphone corresponding to MIC number.

9. PHONE jack
   Used for connecting stereo headphones. The volume is set to a
   predetermined level and is not adjustable.

10. KEY CONTROL jack
    Used for connecting a microphone with key control function.

11. MIC jacks (1 through 3)
    Used for connecting microphones (1 through 3). The jacks correspond to MIC 1 to 3 volume knobs located above.
    Center front panel of the Player

12. DISC1 to DISC3 trays
    Used to load discs. To insert/remove one or up to three (3) discs, press the OPEN/CLOSE button located at the right of the tray corresponding to disc number.

13. VIDEO INTRO button (R)
    Applies to video CDs only. The introductory five (5) seconds of tracks on a video CD are displayed on the television screen in order to present the contents of the video CD.

14. Display window
    Shows information about the status of operation.

15. BOOK DIGEST button (R)
    Displays video segments you marked with the Bookmark function. (See page 14.)
    Right front panel of the Player

16. (OPEN/CLOSE) buttons (Disc number 1 to 3)
    Used to open and close disc trays 1 to 3 respectively. When, after opening the DISC1 tray, another 0 (OPEN/CLOSE) button is pressed, the DISC1 tray is first closed, then the other DISC tray selected is opened.

17. DISC1 through DISC3 buttons with indicators (Green) (R)
    Plays the disc of the number indicated on the button. As soon as the disc begins playing, the indicator blinks.

18. Number keys (1 to 10) (R)
    Used to specify a track number for playing, changing, or program- ming. To operate numbers above ten (10), press the +10 button once. The number keys (1 to 10) are then assigned the numbers 11 to 20 instead of 1 to 10. The maximum key number assignment is 99. In PBC function operation, the number keys are additionally utilized for the selection of menu items. See page 18 “Operation of Playback Control function”.

19. PROGRAM button (R)
    Any desired sequence of tracks can be programmed with the number keys and the +10 button. (On the remote control use +10) The program button cannot be used while the Playback Control function is activated.

20. +10 button (R)
    Used to shift the numbers assigned to the number keys to 11 or higher (maximum 99).

21. RETURN button (R)
    Utilized for operation with the PBC function. This button is used to return to a menu screen during play.

22. PREV / NEXT buttons (R)
    During operation with the Playback Control function
    Invokes previous or next screen.
    During operation without the Playback Control function
    Skips forward or backward quickly from current track being played.
    The controls with identical names on the Player and on the remote control have the same function and are used in the same manner.

23. SELECT (PLAY) button (R)
    Starts to play the disc with/without the Playback Control function.

24. (STOP) button (R)
    Stops play.

25. STILL (PAUSE) button (R)
    Temporarily suspends playing. Video motion freezes and audio reproduction stops. Pressing the button repeatedly advances the picture frame-by-frame. (Video CD only)

26. BOOKMARK button (R)
    Places a “bookmark” at video segments you want to find later for almost instant replay. (See page 14.)

27. B. SEARCH button (R)
    Retrieves video segments which you marked with a bookmark.
    (See page 14.)

28. Jog/Shuttle dial
    Used for fast-forward, fast rewind, and still play.
    Remote control unit

29. VCD POWER/TV POWER button
    Turns the player on and off.
    When pressed after you hold down the SHIFT button, turns the TV on or off.

30. ON SCREEN button
    Controls whether or not control and operation status are displayed on the television screen or monitor.

31. CANCEL button
    Cancels the latest track you have programmed. The latest programmed track is canceled whenever you press this button. Also used to cancel a bookmark.

32. HIGHLIGHT button
    Applies to a video CD to see highlights of a track. Displays the first (5) seconds of each of nine (9) equal-time segments of the track.

33. MPX/V.REPLACE button
    Activates the multiplex function. (See page 12)
    When pressed after you hold down the SHIFT button, activates the vocal replace function, inserting your voice in place of the disc  vocals.

34. RANDOM/REPEAT button
    Changes the disc track program to a random sequence from disc 1 through 3 respectively.
    When pressed after you hold down the SHIFT button, repeats a track or inserted discs from 1 to 3.

35. SLOW/V.MASKING button
    Starts slow-motion playback.
    When pressed after you hold down the SHIFT button, activates the voice masking function, playing the music with low-level vocals.

36. MANUAL SEARCH button
    Shifts the playing location backward and forward quickly. Holding down the button causes it to go much faster.

37. TV/VIDEO/SPATIALIZER button
    Used to preset the remote control unit, to control some functions on your TV set. (See page 10.)
    When pressed after you hold down the SHIFT button, changes the sound ambiance. (See page 13.)

38. SHIFT button
    Used together with other keys for various functions. (See page 10)

39. TV VOL + / TV VOL – keys
    Turns the TV volume up or down.

40. TV PROG – / TV PROG + / KEY CONTROL
    Changes the television channel.
    When pressed after you hold down the SHIFT button, changes the key in which the music plays. (See page 16.)

BASIC OPERATIONS

Now you can play a variety of video CDs!!
Overview of the three modes
This Player has three (3) modes: KARAOKE, NORMAL, and PBC OFF mode. These are selected by the MODE switch. This permits various ways of playing a video CD. KARAOKE mode: One track playing mode. Whenever one track has completed play, the Player stops.
NORMAL mode: Continuous plural track playing mode. The Player plays tracks continuously in the order they appear on the disc.
PBC OFF mode: This mode is identical to the NORMAL mode, except that the PBC function is inhibited.
To set the mode, move the MODE switch on the left side of the front panel.
Triple disc tray usage
Up to three (3) discs can be loaded in the Player. You may insert a disc into any of the disc trays 1 through 3.
If you want to play only a specified disc, press the corresponding disc 1, 2 or 3 button located to the right of the 0 (OPEN/CLOSE) button.
When three discs are inserted, basic order of playing is as follows.

• Pressing DISC 1: DISC 1 → DISC 2 → DISC 3 → STOP
• Pressing DISC 2: DISC 2 → DISC 3 → DISC 1 → STOP
•  Pressing DISC 3: DISC 3 → DISC 1 → DISC 2 → STOP

Display window
The display window indicates many aspects of control and operation status.

1. Shows the disc number being played.
2. Shows mainly the total number of tracks and the track number being played.
3. Shows mainly the cumulative time (minutes and seconds) of the track. Afterward, total time of the disc is displayed.
4. The combination of VCD, PBC, and CD-G indicators shows the type of disc being played.
5. Each indicator in this area lights when the corresponding function is activated.

Preparation for playing
Turn on the television set, amplifier or receiver to which the Player is connected. Then select the proper channel and mode to operate the Player, and set the sound volume to a reasonable level.
Press the POWER button on the front panel or remote control. The display window shows the initial information as shown below.
Easy start up
Without pressing the POWER button you can start up the Player by pressing ** SELECT button or disc buttons.
Inserting/removing disc(s)
Press the (OPEN/CLOSE) button (1 through 3) to open the disc tray. Then place the disc in the round recess of the tray with label side up. To close the tray, press the   (OPEN/CLOSE) button again.
If you press the   (OPEN/CLOSE) button of the disc which is playing, the Player stops and then opens the tray. If you press the (OPEN/CLOSE) button of a disc that is not being played, you can change discs without stopping play. Note**

• When loading a disc in the disc tray, be sure to position the disc inside the recess. Otherwise, the disc will be damaged when the disc tray is closed, and the disc cannot be removed from the unit.

Starting to play disc(s)
Press the   SELECT (PLAY) button. The Player starts to play from he disc indicated in the display window.
Press one of the DISC 1 through 3 buttons and the Player plays the disc you pressed, from the 1st track. For individual track selection, use the number keys or the PREV/NEXT buttons.When you start play, the Display window shows the disc number and the track number being played.
During play, the indicator on the DISC button blinks.
If the PBC function is activated, the display window shows “Pb” until you play a track, and the television screen shows the initial menu, DISC number, and “PBC”. See page 18, “Operation of Playback Control function”.
When you press   SELECT button during play, the disc will restart from the beginning of the track except when the PBC function is activated.
Using number keys
Press the number keys to select numbers.
On the Player ……………….. 1 to 10 and +10 key
Example: For number 5, press 5. For number 15, press +10, then 5.
For number 20, press +10 button, then 10. For number 32, press +10 three times, then 2. On the remote control ….. 1 to 10 and +10 key Select numbers as described above.

Note

• When you press the number keys, the track will start playing without pressing   SELECT button.

Stopping play
Press the   (STOP) button to stop play at any time. Pausing play
Press the   STILL (PAUSE) button to temporarily suspend play.

• When the   STILL (PAUSE) button is pressed once, “PAUSE” appears on the television screen, the video motion freezes and the sound is turned off. The still picture advances frame-by-frame each time the STILL (PAUSE) button is pressed, or the shuttle dial is rotated to the right. This frame-by-frame function is effective only  for video CDs.
• To release the pause, press the   SELECT or blinking DISC 1 through 3 button.
•  During “PAUSE” the time counter on the display will blink.

Auto search/Manual search
On the Player, during play, pressing the   button once causes the Player to replay the current track from the beginning. Pressing The button once causes the Player to skip to the next track. The current position on the disc is displayed on the television screen.Rotating the shuttle dial to the right causes the disc to fast forward. Rotating it to the left causes it to fast reverse. On the remote control, holding down the buttons causes the disc to fast forward or reverse.
Continuing to hold down the buttons causes it to search much faster.

Note

• In some circumstances, this function is not available when the PBC function is activated.
•  The angle at which you hold the shuttle dial determines the manual search speed.

Slow-motion playback on the remote control unit
Press the SLOW/V.MASKING button to play in slow-motion. By pressing the SLOW/V.MASKING button consecutively, the playback speeds are cycled as shown below.

Note

• This function can only be used when playing a Video CD.

Using stereo headphones
Connecting stereo headphones
Connect stereo headphones to the PHONES jack at the lower-left of the front panel. The volume level is fixed and cannot be adjusted.

Using the remote control

Presetting the remote control to operate your own TV
You can use the Player’s remote control unit to control some functions on your TV set (e.g., turning the TV on and off, adjusting volume, or selecting channels). First, though, you must preset the remote control to make it compatible with your TV.
Operation

1. Check the Preset Code Table (page 10) to determine the two- digit brand code number for your TV.

2. While holding down the TV/VIDEO/SPATIALIZER button on the remote control, press the Number keys to insert the two-digit brand code number. (For example, if the code number is “28”, press Number key 2, then 8. If the first digit is a “0”, press 10. Thus, if the code number is “09”, press Number key 10, then 9. If the code number is “10”, press Number key 1, then 10. If it s “20”, press Number key 2, then 10.)
   Notes
   • Before the remote control unit leaves the factory, the brand code number is set as No. 01 (JVC).
   • Depending on your television set’s age and other factors, brand ode numbers may be different from those shown in the table. In uch a case, try out other codes until you find one that corresponds to your television.

3.  While still holding down the TV/VIDEO/SPATIALIZER button, press the STOP button on the remote control.

4. The TV is turned off if the code number is correct. Repeat the procedure from the beginning if you weren’t successful the first time.

Using the SHIFT button on the remote control unit
You can control other functions with the remote control, simply by holding down the SHIFT button while pressing another button. Some of these functions are useful for Karaoke and Video CD playing, others for controlling the TV.

• SHIFT button functions for Karaoke and Video CD playing
  SHIFT + MPX ⇒ VOCAL REPLACE
  SHIFT + RANDOM ⇒ REPEAT
  Push RANDOM several times to toggle the repeat function:
  ALL DISC → 1 TRACK → OFF
  SHIFT + SLOW ⇒ VOCAL MASKING
  SHIFT + TV/VIDEO ⇒ SPATIALIZER
  Push TV/VIDEO several times to toggle the SPATIALIZER function:
  SPATIALIZER H → SPATIALIZER L → OFF
  SHIFT + TV PROG – ⇒ KEY CONTROL (b )
  SHIFT + TV PROG + ⇒ KEY CONTROL (#)

•  SHIFT button functions to control the TV
  SHIFT + VCD POWER ⇒ Turns the TV on and off
  SHIFT + 1 ⇒ TV Channel 1
  SHIFT + 2 ⇒ TV Channel 2
  SHIFT + 10 ⇒ TV Channel 0
  SHIFT + ON SCREEN ⇒ 1 – (The first digit of a TV Channel number
  10 to 19. Push a Number key to insert the second digit.)
  SHIFT + B.SEARCH ⇒ 2 – (The first digit of a TV Channel number 20 to 29. Push a Number key to insert the second digit.)
  SHIFT + +10 ⇒ -/- – (To change a one – digit or to change a two digit TV channel number, using a Number key.)5
  SHIFT + B.MARK ⇒ ENTER (Push after choosing a channel. This function registers the channel you have chosen.)*

Note
 The asterisk * indicates that these operations do not work for some manufacturers’ television sets.
Preset code table

VARIOUS UNIQUE FUNCTIONS

Various functions can enhance your enjoyment
Display of operations status
Preparation
This function is controlled by the remote control.
Operation
Press the ON SCREEN button on the remote control. By pressing the ON SCREEN button, the following information may be easily and quickly displayed or removed from the television screen.
Time, Echo effect, Key control, Program, Repeat, Random, Multiplexing, Vocal replace, Vocal masking, Bookmark, etc. Programming the track sequence you want
Preparation
It is not possible to enter programming mode during play. If playing, stop the player with the 7 STOP button.
Operation

1. Press the PROGRAM button to enter the programming mode. PROGRAM is displayed in the Display Window.
2. Specify the disc by the DISC (1 through 3) button and then the track by the number keys successively. You can program up to nine (9) tracks by repeating this procedure.
3. To play the programmed tracks press the   SELECT button.

Notes

• The track number playing, next track programmed, and number of programmed tracks are displayed from the left-top of the television screen. You may use the ON SCREEN button to delete this information.
• Once the programmed track is played, it is deleted from the program.
• You may continue to program even while the disc is playing.

Canceling a programmed track
Operation
There are three (3) canceling functions (canceling the last programmed track, canceling the current track, canceling the next track to be played).

• To cancel the last programmed track press the CANCEL button on the remote control and the last programmed track will be canceled. This can be done while a disc is playing.

• To cancel the current track press   STOP button.
• To cancel the next track, wait until the current track has finished and press the button and the next track will be canceled and the unit will go to the next programmed track.

Note

• To verify the tracks you programmed, stop the Player and see ON SCREEN information

Clearing a program
To delete all programmed tracks you have entered, press the STOP button and then the PROGRAM button. “PROG OFF” will be displayed on the television screen.

Note

• The Player does not cancel the track program even if the (STOP) button is pressed. Pressing the SELECT (PLAY) button again causes the Player to resume playing from the next track.

Repeating tracks
It is possible to repeat all discs or only a single track.
Preparation
This function is controlled by the remote control.
Operation
Hold down the SHIFT button while you press the RANDOM/ REPEAT button on the remote control. Channel REPEAT modes are cycled as shown below.

Notes

• When playing a programmed sequence of tracks, only one track repeat is available.
• Only REPEAT1 and REPEAT OFF are available in KARAOKE mode.
• The Repeat function is not available when the player is set to PBC ON.
•  Only REPEAT ALL is available when the player is in RANDOM mode.
• You cannot repeat the segment between bookmarks.

Randomly playing tracks
Preparations

• This function is controlled by the remote control.
• The RANDOM button is effective only in NORMAL or PBC OFF mode.
• This function plays tracks randomly from one disc.

Operation

1. Stop the Player.
2. Press the RANDOM/REPEAT button and random playing will start.
3. To cancel random playing, after stopping the Player ( STOP button), press the RANDOM/REPEAT button again.

Note

• Random is not effective in program or KARAOKE mode.

Playing a multiplex sound CD
This function is used for multiplex sound discs.
Operation
By pressing the MPX button consecutively, channel multiplexing modes are cycled as shown below. Viewing the VIDEO INTRO of a video CD
Preparation
When you play a video CD with the Playback Control function, the mode switch should be in the PBC OFF mode or KARAOKE mode.
Operation

1. Play the disc you want to see a digest of.
2. Press the VIDEO INTRO button on the Player or the remote control just after starting disc play. Then the Player starts to  isplay in sequence the first five (5) seconds and track numbers of all tracks on the disc.
3. To select a track during digest display, press the number key corresponding to the item number on the television screen.

Programming during VIDEO INTRO
Operation

1. Stop play.
2. Press the PROGRAM button so that PROGRAM is lit in the display.
3. Press the disc button you want to play, and enter 1 on the number keys.
4. Press the   SELECT button and then, after the disc has started to play, press the VIDEO INTRO button.
5. The Player starts to display in sequence the first five (5) seconds and track numbers of all tracks on the disc. Select the numbers you want to program. You can program nine (9) tracks.
6. Press the SELECT button to play.

Viewing the highlights of a video CD
This function is used for a movie video CD.
Preparations

• When you play a video CD with the Playback Control function, the mode switch should be in the PBC OFF mode or KARAOKE mode.
• This function is controlled by the remote control unit.

Operation

1. Start playing the track you want to see the highlights of.
2.  After the track begins to play, press the HIGHLIGHT button on the remote control.
3. To select one of the nine (9) segments, press the number key (1 to 9) of the segment which you want to play.

Notes

• When you choose a highlight it will start from five (5) seconds before the shown time below each segment.
• The highlights show the proceeding five (5) seconds up to the displayed time on each highlight.
• The segments are each of nine (9) equal-time divisions of the track.
• Nine (9) different highlights are displayed for one (1) minute.
• If no highlight is chosen in the one (1) minute period in NORMAL mode or PBC OFF mode, the next nine (9) segment highlights will begin. In KARAOKE mode highlights will stop.
• While in VIDEO INTRO or HIGHLIGHT, sometimes image is partially distorted. This symptom is caused by noise in the disc itself or incorrect manufacturing, not by a malfunction of the Player.

Selecting the SPATIALIZER mode
You can change the sound ambiance and enjoy a different sound using the Spatializer function.
Operation

1. Choose one of the following two sound modes to change the sound ambiance.
   SPATIALIZER H : For movies and television programs
   SPATIALIZER L : For music clips

2.  To select the Spatializer mode, push the SPATIALIZER button one or more times.
   When one of the Spatializer modes is selected, the SPATIALIZER indicator on the front panel is illuminated.

3. To cancel the effect, press the SPATIALIZER button until the word “OFF” appears on the television screen.

Note

• Depending on which type of TV, amplifier or receiver to combine with this device or which software to play back, sound may be distorted when the SPATIALIZER function is turned on. In such cases, set SPATIALIZER mode to “L”.
•  In the following cases, the SPATIALIZER function does not work even when it is turned on. Always use this function in specified mode.

1. Be sure to set MPX mode of this device to “OFF (Lch + Rch)”. When set to “L mono” or “R mono” mode, the SPATIALIZER function does not work.
2. Be sure to set the sound mode of the TV, amplifier or receiver which is connected to this device to “STEREO”. When set to monaural mode, the SPATIALIZER function does not work. The SPATIALIZER function does not work with monaural TV, either.
3. When sound multiplex (KARAOKE) software is played back with the SPATIALIZER function turned on, you may have an “unnatural” feeling of sound spatiality. To play back sound multiplex software, basically set SPATIALIZER mode to “OFF” or “L”.
4. The SPATIALIZER function does not work for the sound which is recorded through the MIC terminal of this device.

• This function is not effective if you attempt to use, at the same time, the similar function of a television, receiver or other device connected to this Video CD Player. Turn off the function on your television, receiver, or other device before selecting your Video CD Player’s SPATIALIZER mode.

Certain audio features of this product manufactured under a license from Desper Products, Inc., Spatializer® and the circle-in- square device are trademarks owned by Desper Products, Inc.

Playback with the Bookmark function

Marking segments for later viewing with the Bookmark function
The Bookmark function lets you mark segments of a Video CD, so that you can have almost instant playback of desired scenes later. You can mark segments on up to ten discs, with a maximum of nine segments per disc.
Even if you take the disc out of the player, its bookmarks will stay stored for later use, until you erase them.
Operation
While playing the disc, press the BOOKMARK button at the segments you want to mark for later playing. Bookmark numbers appear on the television screen. Notes

• The Bookmark function works only with Video CDs.
• The BOOKMARK function is most easily used when the Player is in PBC OFF mode.
• When you begin marking segments in any one of the three Player modes (KARAOKE, NORMAL or PBC OFF), all subsequent markings and searches for that disc must be done in the same mode.
•  If you mark a segment when the Player is set for the Playback Control (PBC) function, the mark is placed at the beginning of the scene.

Using the BOOKMARK DIGEST button

1. Press the BOOKMARK DIGEST button while playing the disc.
2. The marked segments will be highlighted on the screen, with their respective numbers (maximum of nine).
3.  Press the Number key (1 to 9) which corresponds to the number of the segment where you want to start play.

Note

• If you plan to use the BOOKMARK DIGEST function, register all bookmarks with the player in the same mode.
• The Bookmark Digest function is not available in PBC function.

Using the BOOKMARK SEARCH button
With PBC off

1. Press the BOOKMARK SEARCH button while playing a disc.
   The BOOKMARK SEARCH light will flash on and off, indicating the Player is in the Bookmark Search mode.

2. Press the Number key (1 to 9) which corresponds to the number of the segment where you want to start play. Or press the button until the desired bookmark number appears on the screen.

Note

• To exit the Bookmark Search mode and return to regular viewing, press the BOOKMARK SEARCH button again.

With PBC on

1. Press the BOOKMARK SEARCH button while playing a disc. The play will stop and the Player will enter Bookmark Search mode.
2. ress the Number key (1 to 9) which corresponds to the number of the segment where you want to start play.

Note

• The Bookmark Search function ends automatically, and the player returns to reqular viewing.

Canceling individual bookmarks

1. If the Player is in PBC OFF mode, start playing the segment whose bookmark you want to cancel.
2. Press the CANCEL button. The bookmark for the segment immediately preceding the part you are playing will be canceled.
   (If the Player is in KARAOKE or NORMAL mode, the bookmark with the highest number will be canceled.)

Note

• When you cancel a bookmark number, all subsequent bookmark numbers change, moving up one level to fill the gap you made.
•  If the Player is in PBC ON mode, the last bookmark you registered will be canceled.

Canceling all bookmarks on individual discs
When the disc whose bookmarks you want to cancel is in the  Player:
This cancels all bookmarks on the disc whose play you stopped.

1. Stop play. Hold down the   STILL (PAUSE) button on the Player for at least three seconds.
2. Keep holding down the 88888 STILL (PAUSE) button until bookmark information on the television screen stops blinking.

When the disc whose bookmarks you want to cancel is not in the Player:
This cancels all bookmarks on the disc which was played the least recently.

1. Hold down the STOP button on the Player for at least three seconds.
2. Keep holding down the   STOP button until bookmark information on the television screen stops blinking.

Using a microphone

Using a wired microphone
Operation

1. Insert the connector cable into the end of the microphone.
2.  Press the cable sleeve against the microphone base and turn clockwise. Keep turning until sung.
3.  Up to three (3) microphones can be connected to the MIC jacks on the front panel.
4. Switch the microphone power on.
5. Turn the MIC 1 through MIC 3 knobs clockwise (level up) or counterclockwise (level down) as desired.

Adjusting music key
Press the KEY CONTROL buttons ( or #) to change the key in hich the music plays. To return the music to its original key, press the NORMAL button.
You can adjust the music using the remote control unit also. Notes

• The degree the key has been sharpened or flattened is displayed on the television screen.
• When the song ends the key control will return to NORMAL mode automatically.

Adjusting echo effect
Turn the DIGITAL ECHO knob clockwise (level up) or counterclockwise (level down) to adjust the echo effect as desired. Vocal replace
Preparation
This function is used for multiplex sound discs.
Operation

1. While holding down the SHIFT button, press the MPX/ V.REPLACE button during play or stop. REPLACE will appear on the display window and VO.REPLACE will appear on the television screen. When you start singing, the disc vocal is removed and your voice is inserted into the music.
2. To cancel voice replacement, hold down the SHIFT button and press the MPX/V.REPLACE button again.

Note

• You cannot use the Vocal Replace function with a disc that has vocals recorded on the left channel.

Vocal masking
Preparation
Use a digital audio CD with vocals, in KARAOKE mode.
Operation

1. While holding down the SHIFT button, press the SLOW/ V.MASKING button during play or stop. The player plays the music with low level vocals recorded on the disc. MASKING will appear on the display window and VO.MASKING will appear on the television screen.
2. To cancel vocal masking, hold down the SHIFT button and press the SLOW/V.MASKING button again.

ATTENTION
Be sure to remove the microphone If an excessively strong signal is given to a unit through a microphone, for example when using Karaoke, it may cause an adverse effect such as distorted sound. Lower the sound volume using the microphone control.
Karaoke etiquette
Think of your neighbors when you are enjoying karaoke music. Particularly late at night, the sound you enjoy may reach your neighbors more than you expect. Common sense and courtesy are always appreciated.

OPERATION OF PLAYBACK CONTROL FUNCTION

Playing Video CDs with Playback Control function
This Player provides a Playback Control function which utilizes a procedure (menu selection) programmed in a video CD. The playback operation procedure may differ depending on the disc you use. The Playback Control function is described below and in the figure.

• High-resolution still image display – Super-fine reproduction of still images with more than 4 times the resolution of video tape.

• Menu-driven playback – interactive menus for easy selection of tracks
  Preparation

• A video CD with the Playback Control function is required for this operation.

•  Only the NORMAL mode can be used.

• The buttons available for use are the number keys, the PREV/NEXT buttons, SELECT button, DISC (1 through 3) buttons, and RETURN button.

Button functions

Number keys  (Including +10 button)| Select a specific menu item from the television screen or monitor.
---|---
PREV/NEXT buttons .| Move through menu.
SELECT button| Starts up a video CD with the PBC function in DISC tray(s) 1 to 3.
DISC (1 through 3) buttons| Start up a video CD with the PBC function in the specified DISC tray.
RETURN button| Returns to the menu.

Operation

1. Verify that the Player is in NORMAL mode.
2.  Press the DISC (1 through 3) or 33333 SELECT button, and then the Player starts up the PBC function. “Pb” is shown in the Display window. The main menu, “PBC”, and disc/track numbers are displayed on the television screen.
3. To move through the disc menus, press the PREV/ NEXT buttons.
4. When the disc menu you want appears, select an item in the menu by using the number keys. The numbers on the number eys correspond to the menu item numbers.
5.  To return to a menu and stop the track being played, press the   RETURN button.

Notes

• Page numbers in the disc menu show that preceding pages exist.  To move from the current menu, press the   PREV/NEXT buttons.
• If you have no desire to use the PBC function when playing a disc with the PBC function, switch the MODE switch to “PBC OFF” before playing.
• If you change the mode switch (except to NORMAL mode) when playing a Playback-Control disc, the play stops, so reset again from the beginning.
•  If you press the number keys directly to select the track, you can’t enter PBC mode.

Video CDs with Playback Control function
What is Playback Control function?
The Playback Control function, ushering in a new video CD age, allows you to enjoy menu-driven operation and high-resolution still images having a resolution four times greater than moving pictures.

• Menu-driven playback
  You can interact with the screen using a menu display to select and play an entry.

• High-resolution still image display
  You can display high-quality images four times clearer than moving pictures.

Example of playback using the Playback Control function A selection menu is displayed when you start playing a video CD disc with the Playback Control feature. The selection menu shows a list of numbers for selection. Some discs may show moving pictures or a divided screen.

1. When a list of numbers is displayed, selecting a number shows its contents.

2.  When a moving picture is displayed, pressing SELECT, at the time when the part of the movie you desire is shown, plays the movie.

3.  When the selection menu is redisplayed after you have played your selection, selecting a number again replays its contents.
   (Some discs may show the menu screen several times.) When “Next” and “Prev” are shown, pressing “NEXT” or “PREV” can change the selection menu.

4. After playback, press RETURN to go back to the previous screen. After playback, pressing RETURN for 2 seconds or more causes it to go back to the previous menu selection. Some discs may return you to the menu screen shown before playback.

Note

• When a menu is displayed for a long time (about 10 minutes), the screen background automatically fades out to prevent screen burn-in while the setting is suspended.

RESTRICTING USE OF YOUR DISCS

Locking a disc with the Read-Protect function
Locking a disc
The Read-Protect function restricts viewing of a disc. Only people who know the code can unlock the disc. You can lock only Video CDs (up to a maximum of 10 discs).
Notes

• When you lock a disc using the Read-Protect function, your Player recognizes the number of tracks and the recorded time on that disc. If you try to play another disc which has exactly the same number of tracks and the same recorded time, the Player may mistakenly assume that it is the locked disc.
• You cannot lock a disc while it is playing, or when the VCD light is blinking (i.e., immediately after turning on the player or shutting a disc tray). Stop the disc, then lock it.
•  All Read-Protect functions are performed using buttons on the Player, not on the remote control.

Operation

1. Play the disc for a moment, then press the Stop button.
2. Hold down the NEXT button on the Player for at least three seconds. The track and time numbers are no longer displayed.
3. Press the Number key “8” four times. The Display window indicates “Loc.”
   Now the disc cannot be viewed. You can open and close the tray and you can turn the Player power on and off, but no other functions are available for this locked disc.

Notes

• PROTECT is displayed on the television screen.
  Cut out the following instructions and keep them separately, to ensure privacy.

Canceling Read-Protect
Operation

1. Place the disc in a tray, then press the Disc button for that tray. PROTECT is displayed on the television screen.
2. Hold down the PREV (Previous) button on the Player for more than three seconds. The indication “Loc” in the Display window will flicker for a moment.
3. Press the Number key “8” four times. You can now play the disc.

Canceling Read-Protect for a single viewing
Operation

1. As above, hold down the PREV (Previous) button on the Player for at least three seconds. The indication “Loc” in the Display window will flicker for a moment.
2. Press the Number key “7” four times. You can now play the disc, but only until you press the OPEN/CLOSE button for that disc, or until you play another disc. (Turning off the Player  power does not lock the disc again.) This function is convenient when you want to play a disc, but you also want to restrict its use later.

GRAPHIC/DIGITAL AUDIO CDs

Playing CD Graphics/ digital audio CDs
Playing CD Graphics
Basic video CD-playing procedures apply although the pictures are still. A CD Graphics is identified by “CD-G” shown on the display.
Notes

• The following operations may distort the image on the screen.
  Searching for starting point of music Fast forwarding/reversing Stop/pause

• If paused, the screen changes to blue in a few minutes. This is to prevent burn-in of the TV screen.

Playing digital audio CDs
Basic video CD-playing procedures apply to the reproduction of sound. Note

• The display has no indicator to show disc type.

SPECIFICATIONS

Main specifications

X L-MV35TN|
---|---
Model| Video CD player
Playback disc| Video CD (with/without Playback Control function) CD Graphics
Digital Audio CD
Total harmonic distortion| 0.01% (1 kHz)
S/N ratio| 90 dB (Best Case)
Frequency response| 20Hz — 20kHz
Input terminal| Microphone| 2 mV (9.1 kf2)
Output terminal| Line output| 2.0 Vrms (full scale)
Image output Video (composite)| 1.0 Vp-p (7552)
Echoing| Digital echoing|
Power requirements| AC220V/50Hz (for China)
AC115-127/220-240V%
adjustable with the voltage selector; 50/60Hz (for other area)
Power consumption| In standby mode| 18 watts 5 watts
Weight| | 5.3 Kg (11.7 Ibs)
Dimensions (W/H/D)| | 447 x 127 x 333.5 mm 17-5/8 x 5 x13-3/16 inches

Accessories

TROUBLESHOOTING
What appears to be a malfunction may not always be so. Please go through the following list before requesting service.

connect the plug to AC outlet.
Batteries are exhausted.| Replace the batteries with new ones.
Remote control does not work.| The tip of the remote controller is not pointed at the receiving part of the player.| Use the remote control correctly.
No image is displayed on the monitor.| The video cable is not connected.| Firmly connect the cable.
The TV is not set in video mode.| Set the TV in video mode.
An incompatible disc is loaded.| Load a disc compatible with the player.
Playback does not start.| No disc is loaded.| Load a disc.
Disc is loaded upside down.| Reload the disc with the label up.
Speaker does not produce sound.| Audio cable is not connected.| Firmly connect the cable.
Operation of the external amplifier is incorrect.| Operate the amplifier correctly.
Sound is distorted or noise is generated.
Image is garbled.| Disc is dirty.| Wipe the disc surface with a soft cloth.
Connection is wrong.| Correctly connect cables. (See page 2.)
Sound is intermittent. Image is garbled.| Disk is dirty.| Wipe the disc surface with a soft cloth. (See page 1.)
Disc is scratched.| Replace the disc with a new one.
Disc is warped.
Disc tray does not come out when OPEN/CLOSE button is pressed.| Power plug is disconnected from the power outlet.| Firmly insert the plug into the outlet.
Operation is not possible.| Microcomputer malfunctions due to lightning or static electricity.| Turn the power off, then on again.

The malfunction may be caused by a device other than the player. Check other devices connected to the player.
AC Power Line Instructions (not applicable for China)

This file has been downloaded from:www.UsersManualGuide.com
User Manual and User Guide for many equipments like mobile phones, photo cameras, monther board, monitors, software, tv, dvd, and othes..
Manual users, user manuals, user guide manual, owners manual, instruction manual, manual owner, manual owner’s, manual guide, manual operation, operating manual, user’s manual, operating instructions, manual operators, manual operator, manual product, documentation manual, user maintenance, brochure, user reference, pdf manual

Downloaded from: https://www.usersmanualguide.com/
1097TTMUBNJEM

References

• User Manual, users guide, operation instruction
• User Manual, users guide, operation instruction

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>