LARKSOUND L200M 2.0 CH 3D SoundBar User Manual

LARKSOUND L200M 2.0 CH 3D SoundBar

Product Information

• Specifications
  • Product Name: Soundbar L200M
  • Channel: 2.0 CH
  • Sound Technology: 3D soundbar

Product Usage Instructions

• Important Safety Instructions
  • Please read and follow these safety instructions to ensure safe usage of the Soundbar:
  • Do not dismantle the product or expose it to rain or moisture to reduce the risk of electric shock.
  • The product contains no user-serviceable parts. Refer servicing to qualified personnel only.
  • The lightning flash symbol indicates the presence of dangerous voltage that may cause electric shock.
  • Read and observe all important warnings and instructions provided in the unit and this manual.
• Preparation for Use
  • Before using the Soundbar, ensure the following:
  • Power Source: The Soundbar operates on a normal AC power source with SMPS 100V-240V and 50Hz/60Hz. Do not use any other power source to avoid damage not covered by warranty.
• Important Notes
  • The product diagram indicates the various controls and ports available on the Soundbar:
  • Standby: Short press for power ON, long press for power OFF.
  • Input: Short press to choose input mode (HDMI ARC/OPT/AUX/USB/BT), long press to connect/reconnect the device under BT mode.
  • VOL+: Increase master volume.
  • VOL-: Decrease master volume.
  • USB: USB port.
  • AUX IN: Auxiliary input port.
  • HDMI(ARC): HDMI input port with ARC support.
  • Optical: Optical input port.
• Product Usage
  • Standby Mode
  • To power on the Soundbar, short-press the standby button. To power off, long press the standby button.
  • HDMI Mode
  • Select HDMI mode using the input button. This mode allows you to connect devices via HDMI input.
  • Optical Mode
  • Select optical mode using the input button. This mode allows you to connect devices via the optical input port.
  • VOL+ and VOL-
  • Use the VOL+ button to increase the master volume and the VOL- button to decrease the master volume.
  • BASS-
  • Press the BASS- button to decrease the bass level.
  • AUX IN Mode
  • Select AUX IN mode using the input button. This mode allows you to connect devices via the auxiliary input port.
  • Play/Pause
  • This button works only under the USB & BT modes of a smartphone. Use it to play or pause audio playback.
  • Pre Button
  • This button works only under the USB & BT modes of a smartphone. Press it to go to the previous program.
  • Music EQ Mode
  • Select music EQ mode to optimize sound for music playback.
  • Standard EQ Mode
  • Select standard EQ mode for balanced sound output.
  • Night EQ Mode
  • Select night EQ mode for quieter sound output suitable for nighttime use.
  • Dialogue EQ Mode
  • Select dialogue EQ mode to enhance speech clarity.
  • Pairing
  • Long press the pairing button to disconnect a connected
  • Bluetooth device or reconnect the last connected device while devices are disconnecting.
  • Bluetooth Mode
  • Select Bluetooth mode using the input button. This mode allows you to connect devices via Bluetooth.
  • BASS+
  • Press the BASS+ button to increase the bass level.
  • MUTE
  • Press the MUTE button to mute or unmute the soundbar.
  • USB Mode
  • Select USB mode using the input button. This mode allows you to connect devices via the USB port.
  • Next Button
  • This button works only under the USB & BT modes of a smartphone. Press it to go to the next program.
  • Movie EQ Mode
  • Select movie EQ mode to optimize sound for movie playback.
  • 3D Sound
  • Select the 3D sound effect using the dedicated button.
• FAQ
  • Q: Can I dismantle the Soundbar?
  • A: No, dismantling the Soundbar can cause electric shock. Do not attempt to dismantle it. Refer servicing to qualified personnel.
  • Q: Can I place the Soundbar inside a cabinet or walled shelf?
  • A: No, it is recommended to place the Soundbar on a flat surface such as a TV unit or shelves. Allow some space between the speaker and the wall for optimal sound output and airflow.
  • Q: How do I power on/off the Soundbar?
  • A: Short press the standby button to power on the Soundbar. Long press the standby button to power it off.
  • Q: How do I connect the Soundbar to a power source?
  • A: Connect the power cord to a wall socket, and the Soundbar will automatically turn on. To turn off the device, press the power button on the Soundbar or remote control, then unplug the power cord from the wall socket.

Thank you for purchasing the home theater L200M Soundbar. Please read this user manual carefully and keep for future reference.

Warning

Caution:

• To reduce the risk of electric shock, do not dismantle the product and do not expose the apparatus to rain or moisture. No user-serviceable parts inside. Refer servicing to qualified personnel only
• The lightning flash within an equilateral triangle is intended to alert you to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute an electric shock to a person or persons.
• Important! This symbol alerts you to read and observe important warnings and instructions on the unit or in this manual.

Notice:

This appliance is not intended for use by persons (including children) with reduced physical sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.

1. To prevent possible hearing damage, do not listen at high volume levels for long periods or a sudden high volume level.
2. Never use the device unsupervised! Switch off the device whenever you are not using it, even if not using it only for a short while.
3. The appliance is not intended to be operated using an external timer or a separate remote control system.
4. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons to avoid a hazard.
5. Before operating this system, check the voltage of this system to see if it is identical to the voltage of your local power supply.
6. The unit should not be impeded by covering the ventilation opening with items such as newspaper, tablecloths, curtains etc. Make sure that there is at least 20 cm of space above and at least 5 cm of space on each side of the unit.
7. The apparatus must not be exposed to dripping or splashing and objects filled with liquids, such as vases, must not be placed on the apparatus.
8. To prevent fire or shock hazards, do not expose this equipment to direct heat, rain, moisture or dust.
9. Do not locate this unit near any water sources e.g. taps, bathtubs, washing machines or swimming pools. Ensure that you place the unit on a dry, stable surface.
10. Do not place this unit close to a strong magnetic field.
11. Do not place the unit on an amplifier or receiver.
12. Do not place this unit in a damp area as the moisture will affect the life of electric components.
13. Do not attempt to clean the unit with chemical solvents as this might damage the finish. Wipe with a clean, dry or slightly damp cloth.
14. When removing the power plug from the wall outlet, always pull directly on the plug, never pull on the cord.
15. Depending on the electromagnetic waves used by a television broadcast, if a TV is turned on near this unit while it is also on, lines might appear on the LED TV. Neither this unit nor the TV is malfunctioning. If you see such lines, keep this unit well away from the TV set.
16. The mains plug is used to disconnect the device, the disconnected device should remain readily operable.

Important Safety Instructions

1. Read these instructions. Keep these instructions. Follow all instructions. Heed all warnings.
2. Do not use this apparatus near water.
3. Clean only with a dry cloth.
4. Do not block any ventilation openings. Install following the manufacturer’s instructions.
5. Do not install near any heat sources such as radiators, heaters, stoves, or other apparatus (including amplifiers) that produce heat.
6. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades one wider than the other.
7. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles or at the point where they exit from the apparatus.
8. Only use attachments/accessories specified by the manufacturer.
9. Unplug this apparatus during lightning storms or when unused for long periods.
10. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, for example, when the power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
11. The DC plug is used to disconnect the device, the disconnected device should remain readily operable. To disconnect the apparatus from the DC power completely, the DC plug must be removed from the AC outlet completely.

Unpacking and Set Up

• Remove the Soundbar from the carton and remove all packing material from the Soundbar.
• Save the packing material, if possible, in case the Soundbar ever needs to be serviced or transported. The original carton and packing material are the only safe way to pack your Soundbar to protect it from damage in transit.
• Remove any descriptive labels or stickers on the front or top of the cabinet. Do not remove any labels or stickers from the back or bottom of the cabinet.
• Place your Soundbar on a level surface such as a table, desk or shelf, convenient to an AC outlet, out of direct sunlight, and away from sources of excess heat, dirt, dust, moisture, humidity, or vibration.
• Unwind the Line cord connecting the AC adapter and extend it to its full length.

Protect Your Furniture

• This model is equipped with non-skid rubber ‘feet’ to prevent the product from moving when you operate the controls. These ‘feet’ are made from non-migrating rubber material specially formulated to avoid leaving any marks or stains on your furniture. However certain types of oil-based furniture polishes, wood preservatives, or cleaning sprays may cause the rubber ‘feet’ to soften, and leave marks or a rubber residue on the furniture.
• To prevent any damage to your furniture we strongly recommend that you purchase small self-adhesive felt pads, available at hardware stores and home improvement centers everywhere, and apply these pads to the bottom of the rubber ‘feet’ before you place the unit.

Power Source

• This sound bar is designed to operate on a normal AC Power source, it works only under SMPS 100V-240V～50hz/60Hz. Do not attempt to operate the Soundbar on any other power source. You could cause damage to the Soundbar that is not covered by your warranty.

Important Notes

This sound bar was specially developed for LED/LCD/Plasma TVs:

• It should not be used in combination with CRTTV’s (Cathode Ray Tube TV’s) to avoid image interference.
• The safety and operating instruction manual should be retained for future reference.
• The apparatus should not be exposed to dripping, splashing or placed in a humid atmosphere such as a bathroom.

Do not install the product in the following areas:

• Places exposed to direct sunlight or close to radiators.
• On top of other stereo equipment that radiates too much heat -Blocking ventilation or in a dusty area.
• Areas where there is constant vibration.
• Humid or moist places.
• Do not place near candles or other flames.
• Operate the product only as instructed in this manual.
• Before turning on the power for the first time, make sure the sound bar is plugged to power outlet.
• For safety reasons, do not remove any covers or attempt to gain access to the inside of the product. Refer any servicing to qualified personnel.
• Do not attempt to remove any screws, or open the casing of the unit; there are no user serviceable parts inside. Refer all servicing to qualified service personnel.

Product Diagram

1. Standby: short press for power ON, long press for OFF;

2. Input: short press for choosing input mode(HDMI ARC/OPT/AUX/USB/BT); long press for connect/unconnected device under BT mode;

3. VOL+: master volume up

4. VOL-: master volume down

5. USB

6. AUX IN

7. HDMI(ARC)

8. Optical

9. Standby mode, short press for power on, long press for power off.

10. HDMI mode

11. Optical mode

12. VOL+: master volume up

13. BASS-: To decrease the bass.

14. VOL-: master volume down

15. AUX IN mode

16. Play/Pause (Only work under USB & BT mode of smartphone)

17. Pre button: Previous program (Only works under USB & BT mode of smartphone)

18. Music EQ mode

19. Standard EQ mode

20. Night EQ mode

21. Dialogue EQ mode

22. Pairing (long press for disconnect bluetooth device if connecting, or connect back the last connected device while devices are disconnecting )

23. Bluetooth mode

24. BASS+: to increase the bass.

25. MUTE: mute/unmute the soundbar

26. USB mode

27. Next button: Next program (Only work under USB & BT mode of smartphone)

28. Movie EQ mode

29. 3D Sound: select the 3D sound effect.

PACKAGE CONTENTS

Positioning the Sound Bar

• Place on a flat Surface
  • Place the sound bar horizontally on a flat surface such as a TV unit or shelf and align it centrally with the TV screen.
  • Allow some space between the speaker and the wall.
  • Don’t place it inside a cabinet or a walled shelf.
  • Follow this guidance for the best sound output and good airflow around the soundbar.

Mount on the wall

WARNING:

• If you don’t feel confident to correctly and securely wall-mount the sound bar, seek the assistance of an experienced person of professional.
• Insert the two wall-mount screws into the wall, refer to the wall-mounting template we supplied in the package for the distance.
• Install the speaker on a vertical, fast, reinforced area of the wall. For plaster walls, it is recommended to screw into wall studs for greater security. For optimum performance, allow at least 30mm distance between the sound bar and the TV.

Follow the below steps to mount the sound bar on the wall

1. Make 2 holes on the wall with distance same as the wall bracket on the soundbar, refer to the wall mounting template to make it correct easily.
2. Put the plastic anchors onto the wall and secure the screws to the plastic clip, do not tighten the screws all the way make sure to leave some space.
3. Once the screws are securely fastened, hang the soundbar over by inserting the screws onto the wall mount bracket.
4. We also provide one set of plus brackets in case you need more distance between the wall and the soundbar when you use HDMI or Optical cable, only move the screw of the original bracket on the soundbar and exchange the plus set.

Connecting Electrical Power

Use the power components to connect the Soundbar to an electrical outlet in the following order:

1. Connect the power cord to a wall socket, then the Soundbar will automatically turn on the device, indicator LED will turn
2. To turn off the device, press the power button either on the Soundbar keyboard or on the remote control, then unplug from wall socket.

Setting the Soundbar

1. Plug the power cord in and the LED will light up.
2. Press the HDMI(ARC)/BLUETOOTH/OPTICAL/AUX/USB button on the remote control to switch the input mode
   • The indicator can change into 5 different colours, representing different input modes:
   • HDMI(ARC) mode: Green Bluetooth mode: Blue Optical mode: White AUX mode: Orange USB mode: Red
3. The indicator will light off after 30 seconds without any operation, press any button on the remote control to turn on it.
4. The soundbar will be on standby after 30 mins without any audio input.
5. When the soundbar in the highest volume, you will hear a beep sound if you keep adding volume.

Playing Audio via BT Connection

1. Turn on the sound bar and then short-press BT to switch to BT mode;
2. Activate the pairing function on your phone or other compatible device and select “LS Soundbar”;
3. When successfully paired, the LED display will stay on blue light.
4. The remote control includes BT mode playback controls.
   • Notes: Press on the remote control to shut down in pairing mode, and repress to reconnect to the last connected device.
   • If the connected device is switched off or manually disconnected, the soundbar will automatically enter pairing mode, successfully connected device will be re-established once you re-enter the wireless range(10 meters). To connect to other devices, repeat the above pairing steps.

AUX mode

1. Connect the sound bar to your PC, tablet, smartphone, TV or other device using 3.5mm audio cable by short-press AUX on remote control.
2. In this mode, playback can only be controlled on your connected device.

Playing Audio via USB Port

1. Ensure that your USB flash drive contains MP3 or WMA audio files (other file types not supported).
2. Connect the USB flash drive to the USB port on the sound bar (or your own USB extension cable connected to the USB port);
3. Select USB mode by short press USB on remote control;
4. The remote control includes USB input mode playback controls.

Optical Mode

• You can connect digital amplifiers or TV with an optical digital output to the sound bar via optical cable.

Proceed as follows:

• Connect the optical cable to the optical digital output of your output device.
• Then connect the optical cable to soundbar.
• Press OP on the remote control to select optical mode.
• Start playing on the output device.
• Using the native controls on your connected device, ensure the audio settings are set to PCM or Optical Audio.

HDMI Mode

1. The Soundbar supports HDMI with Audio Return Channel(ARC). If your TV is HDMI(ARC) compliant, you can hear the TV audio through your Soundbar by using a single HDMI cable.
2. Using a High Speed HDMI cable, connect the HDMI(ARC) connector on the soundbar to the HDMI (ARC) connector on the TV. The HDMI(ARC) connector on the TV might be labelled differently. For details, see the TV user manual.
3. By using HDMI connection, you can control soundbar vol+/- through TV remote control.

Important Notes:

1. Enable Consumer Electronics Control(CEC) on your TV; Only HDMI ARC connections needs to enable CEC.
2. These are names different brands might use for HDMI-CEC: Samsung (Anynet+++), Vizio(CEC),Sony(Bravia Sync), LG(SimpLink), Sharp(Aquos Link), Philips (EasyLink), Roku(1-Touch Play)

Specifications

Troubleshooting

Remark: Once additional information is needed, please kindly contact support@larksound.com. we will support you in the shortest time.

FCC

FCC Compliance

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide equipment protection uses and am late rein teque eyes and, not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

FCC Radiation Exposure Statement:
The equipment complies with FCC Radiation exposure limits set forth for uncontrolled enviroment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC

WEEE Compliance
Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories should not be disposed of with other household waste at the end of their working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take these items for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product and its electronic accessories should not be mixed with other commercial wastes for disposal. 2.0 CH 3D soundbar

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>