Leica Q2 Monochrom Digital Compact Camera Instruction Manual

Leica Q2 Monochrome Digital Compact Camera

Specifications

• Model: Q2 Monochrome
• Manual Version: EN/2020/11/2/1.0

Foreword

Dear Customer, We wish you a great deal of fun and success taking photographs with your new Leica Q2 Monochrome. Please read this manual thoroughly to familiarize yourself with the full scope of functions your camera has to offer. You can find all information about the Leica Q2 Monochrom whenever you need it at: q2-monochrom.leica-camera.com. Your Leica Camera AG

Scope of Delivery

Before using your camera for the first time, please check that the accessories supplied are complete.

Replacement Parts/Accessories

Please read the chapters Legal Information, Safety Remarks, and General Information before using your camera for the first time. Knowledge of the content will prevent inadvertent damage to the product, possible injuries, and other risks. Please contact Leica Customer Care or visit the Leica Camera AG website for information on the extensive range of Leica replacement parts/accessories: en.leica-camera.com/Photography/Leica-Q/AccessoriesOnly the accessories specified and described in this manual or by Leica Camera AG must be used with the camera (battery, charger, mains plug, mains cable, etc.). These accessories should only be used with this product. Third-party accessories may result in malfunctions or damage to the product.

Legal Information

COPYRIGHT NOTICE
All rights reserved. All text, images, and graphics are subject to copyright and other laws to protect intellectual property. They must not be copied, modified, or used for any purpose including trade purposes.

BRANDS AND LOGOS
The brand names and logos used in this document are protected trademarks. These brands or logos must not be used without prior approval by Leica Camera AG.

LICENSE RIGHTS
Leica Camera AG intends to provide you with innovative and informative documentation. Due to the amount of creativity that has gone into its design, we ask for your understanding that Leica Camera AG must protect its intellectual property, including patents, trademarks, and copyrights, and that possession of the documentation does not infer any licensing rights of the intellectual property of Leica Camera AG.

**TECHNICAL DATA

**

Specific regional approvals for this device can be found in the camera menu. Select Camera Information in the main menu and select Regulatory Information.

CE MARK
The CE mark on our products documents compliance with the fundamental requirements of applicable EU guidelines.

Declaration of Conformity (DoC)
Hereby, Leica Camera AG declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. Customers can download a copy of the original DoC to our Radio Equipment products from our DoC server: www.cert.leica-camera.com. In case of further questions, please contact: Leica Camera AG, Am Leitz-Park 5, 35578 Wetzlar, Germany

Frequently Asked Questions (FAQ)

1. Q: Where can I find information about Leica Q2 Monochrome accessories?
   A: You can find information about Leica Q2 Monochrome accessories on the Leica Camera AG website at en.leica-camera.com/Photography/Leica-Q/Accessories.

2. Q: Can I use third-party accessories with the Leica Q2 Monochrome?
   A: No, only the accessories specified and described in the manual or by Leica Camera AG should be used with the camera. Third-party accessories may result in malfunctions or damage to the product.

3. Q: Where can I find specific regional approvals for the Leica Monochrom?
   A: Specific regional approvals can be found in the camera menu. Select Camera Information in the main menu and select Regulatory Information.

Dear Customer, We wish you a great deal of fun and success taking photographs with your new Leica Q2 Monochrome. Please read this manual thoroughly to familiarize yourself with the full scope of functions your camera has to offer. You can find all the information about the Leica Q2 Monochrom whenever you need it at q2-monochrom. leica-camera.com.
Your Leica Camera AG

Before using your camera for the first time, please check that the accessories supplied are complete.
­ Leica Q2 Monochrom with attached lens hood ­ Lithium-ion battery Leica BP- SCL4 ­ Charger Leica BC-SCL4, incl. mains cable (US, EU) ­ Lens hood cap ­ Thread protection ring ­ Accessory shoe cover ­ Carry strap ­ Quick Start Guide ­ Test certificate ­ CE flyer ­ Creative Cloud flyer

REPLACEMENT PARTS/ACCESSORIES

Please read the chapters “Legal information”, “Safety

remarks”, and “General information” before using your camera

Please contact Leica Customer Care or visit the Leica Camera AG

for the first time. Knowledge of the content will prevent

website for information on the extensive range of Leica replacement inadvertent damage to the product, possible injuries and other

parts/accessories:

risks.

en.leica-camera.com/Photography/Leica-Q/Accessories

Only the accessories specified and described in this manual or by Leica Camera AG must be used with the camera (battery, charger, mains plug, mains cable, etc.). These accessories should only be used with this product. Third-party accessories may result in malfunctions or damage to the product.

3

LEGAL INFORMATION

LEGAL INFORMATION ABOUT THIS MANUAL

Legal information

COPYRIGHT NOTICE
· Compliance with copyright laws is mandatory. The recording and publication of pre-recorded media like tapes, CDs or other published or broadcast material may breach copyright laws. The same applies for all software supplied in the scope of delivery.
· The following applies for all video material created with this camera: This product is governed by the AVC Patent Portfolio license and is meant for private use by a consumer only. The device may furthermore be used for purposes for which the consumer receives no remuneration, e.g. (i) encoding in accordance with the AVC Standard (“AVC Video”) and/or (ii) decoding of AVC Video that was encoded by a consumer in accordance with the AVC Standard within the scope of personal use and/or which the consumer has received from the provider, who is in possession of a license to offer AVC Video. No license is granted or implied for any other use. Any other use, specifically the provision of AVC video in exchange for remuneration, may require a separate license agreement with MPEG LA, L.L.C. Please visit the MPEG LA, L.L.C. website at: www.mpegla.com for more information.

COPYRIGHT
All rights reserved. All text, images and graphics are subject to copyright and other laws to protect intellectual property. They must not be copied, modified or used for any purpose including trade purposes.
TECHNICAL DATA
Product changes with regards to the product or services may have occurred after the editorial deadline. The manufacturer reserves the right to effect structural or shape changes, color deviations and changes to the scope of delivery or service, where these changes or deviations are reasonably acceptable for the customer, while taking into consideration the interests of Leica Camera AG. In that respect, Leica Camera AG reserves the right to changes and errors. The images in this manual may depict accessory, special features or other items that are not part of the standard scope of delivery or service. Some pages may contain model types and services, which are not offered in specific countries.

Legal information

The brand names and logos used in this documented are protected trademarks. These brands or logos must not be used without prior approval by Leica Camera AG.

LICENSE RIGHTS
Leica Camera AG intends to provide you with innovative and informative documentation. Due to the amount of creativity that has gone into its design, we ask for your understanding that Leica Camera AG must protect its intellectual property, including patents, trademarks and copyrights and that possession of the documentation does not infer any licensing rights of the intellectual property of Leica Camera AG.

WLAN/BLUETOOTH®
· Appropriate measures must be taken to ensure security and protect against disruptions to the systems in place where devices or computer systems are in use that require more stringent security than WLAN devices.
· Leica Camera AG shall not accept liability for damages arising from the use of the camera for purposes other than as a WLAN device.
· It is assumed that the WLAN function will be used in countries where this camera is sold. There may be a risk of breaching statutory wireless communication regulations when using the camera in other countries. Leica Camera AG shall not accept liability for such breaches.

· Please note that there is a risk of unauthorized third party interception of wirelessly communicated data. We highly recommend that you activate encryption in the wireless access point settings to ensure data safety.

· Avoid using the camera in areas where it can be exposed to magnetic fields, static electricity or other interferences, e.g. near a microwave oven. RF transmissions may otherwise not reach the camera.

5

Legal information

EN

· Using the camera near devices like microwave ovens or wireless REGULATORY INFORMATION

phones that use the 2.4 GHz RF band may negatively affect the performance of both devices.

You will find the manufacturing date of your camera on the stickers

· Do not attempt to connect to wireless networks you are not authorized to use.

in the Warranty Card and/or on the packaging. The date format is year/month/day.

· The device will automatically search for wireless networks, once the WLAN function is enabled. A list, including networks you are not authorized to access, will be displayed (SSID: Network identifier for a WLAN network). Do not attempt to connect to such a network, as this could be construed as unauthorized access.

Specific regional approvals for this device can be found in the camera menu.
Select Camera Information in the main menu Select Regulatory Information

· We recommend disabling the WLAN function while on an aircraft.
· The use of the WLAN-RF band between 5150 MHz and 5350 MHz is permitted only in enclosed spaces.
· Please read the important notes on specific functions of Leica FOTOS on p. 138.

CE MARK
The CE mark on our products documents compliance with the fundamental requirements of applicable EU guidelines.
English Declaration of Conformity (DoC) Hereby, “Leica Camera AG” declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. Customers can download a copy of the original DoC to our Radio Equipment products from our DoC server: www.cert .leica-camera.com In case of further questions, please contact: Leica Camera AG, Am Leitz-Park 5, 35578 Wetzlar, Germany

Depending on product (see technical data)

Type

Frequency band (central frequency)

WLAN
Bluetooth® Wireless Technology

2412­2462/5180­5240 MHz/ 5260­5320/5500­5700 MHz 2402­2480 MHz

Maximum power (dBm E.I.R.P.) 20
20

6

DISPOSAL OF ELECTRICAL AND ELECTRONIC

EN

EQUIPMENT

(Applies within the EU and for other European countries with active waste separation policies.)

Legal information

This device contains electric and/or electronic components which must not be disposed of in general household waste. Instead, it should be disposed of at a recycling collection point provided by your local authority.
This service is free of charge. Any standard or rechargeable batteries used in this device must be removed and disposed of separately in accordance with local regulations.
Please contact your local authorities, waste disposal collection point or the retailer, from whom you purchased the device for more information on correct waste disposal.

7

EN SAFETY REMARKS

cause irreparable damage. This component must only be cleaned with a dry cloth (in system cameras).

Safety remarks

GENERAL INFORMATION

· Use a cotton or linen cloth instead of a microfiber cloth from an optician’s (synthetic) when cleaning the contacts. Make sure to

· Do not use your camera in the immediate vicinity of devices that generate powerful magnetic, electrostatic or electromagnetic fields (e.g. induction ovens, microwave ovens, television sets or computer screens, video game consoles, cell phones, broadcasting equipment). Their electromagnetic fields can interfere with recordings.
· Strong magnetic fields, e.g. from speakers or large electric motors can damage the stored picture data or disrupt recording.
· Switch off the camera, remove the battery briefly, replace it and switch the camera back on in case of a camera malfunction due to the effects of electromagnetic fields.
· Do not use the camera in the immediate vicinity of radio transmitters or high-voltage power lines. Their electromagnetic fields may interfere with recordings.
· Always store small parts e.g. the accessory shoe cover as follows:
­ out of the reach of children
­ in a safe location, where they will not get lost or stolen
· State-of-the-art electronic components are sensitive to static discharge. Since people can easily pick up charges of several 10 000 volts by walking on synthetic carpets, a discharge can occur when you touch the camera, and especially it is placed on a conductive surface. A static discharge on the camera housing

discharge any electrostatic charge by deliberately touching a heating or water pipe (conductive, grounded material). Dirt deposits and oxidation on the contacts can be avoided by storing your camera in a dry location with the lens cap and the flash shoe/viewfinder cap (in system cameras) attached.
· Only use accessories specified for this model to prevent faults, short circuits or electric shock.
· Do not attempt to remove parts of the housing (covers) yourself. Repairs must be done at authorized service centers only.
· Protect the camera against contact with insect sprays and other aggressive chemicals. Petroleum spirit, thinner and alcohol must not be used for cleaning. Some chemicals and liquids can damage the camera housing or the surface finish.
· Rubber and plastics are known to expel aggressive chemicals and should therefore not be kept in contact with the camera for extended periods of time.
· Prevent any sand or dust or water penetration into the camera, e.g. during snowfall or rain or on the beach. Be extra careful when changing the lens (in system cameras) and when inserting or removing the memory card and rechargeable battery. Sand and dust can damage the camera, the lens, the memory card and the battery. Moisture can cause malfunctions and irreparable damage to the camera and memory card.

poses no risk for the electronics. Despite built-in safety circuits, you should avoid direct contact with external camera contacts

LENS

like those in the flash shoe.

· A camera lens can have the effect of a magnifying glass when

· Take care not to soil or scratch the sensor for lens detection in

exposed to direct frontal sunlight. The camera must therefore be

the bayonet. You must similarly prevent direct contact of the

protected against extended exposure to direct sunlight.

bayonet with grains of sand or similar particles, as these could 8

· Attaching the lens cap and keeping the camera in the shade or · Keep the battery away from sources of heat in case of leakage

EN

ideally in its camera case, will help prevent damage to the

or if you smell burning. Leaked fluid can catch fire!

Safety remarks

interior of the camera.

· The use of other chargers not approved by Leica Camera AG can

cause damage to the batteries ­ and in extreme cases ­ cause

RECHARGEABLE BATTERY is

serious or life-threatening injuries.

· Improper use of the batteries or the use of unapproved battery types may result in an explosion!
· Do not expose the rechargeable battery to sunlight, heat, humidity or moisture for prolonged periods of time. Likewise, the batteries must not be placed in a microwave oven or a

· Make sure that the power socket is freely accessible at all times. · Do not attempt to open the battery or the charger. Repairs must
only be carried out by authorized service centers. · Keep batteries out of the reach of children. Batteries can cause
suffocation when swallowed.

high-pressure container as this would pose a fire or explosion hazard.

FIRST AID

· Do not under any circumstances charge or insert a damp or wet battery into the camera!
· A safety valve in the battery ensures that any excess pressure caused by improper handling is discharged safely. It is nevertheless important to dispose of a bloated battery immediately. It may pose an explosion hazard!
· Keep the battery contacts clean and easily accessible. Although

· Battery fluid may cause blindness if it comes into contact with the eyes. Rinse the eyes thoroughly with clean water immediately. Avoid rubbing. Seek medical attention immediately.
· Leaked battery fluid poses an injury hazard when it comes in contact with clothing or skin. Rinse the affected areas thoroughly with clean water.

lithium-ion batteries are secured against short circuits, they

should still be protected against contact with metal objects like

paper clips or jewelry. A short-circuited battery can get very hot and cause severe burns.
· When a battery is accidentally dropped, make sure to check the housing and the contacts immediately for any damage. A damaged battery can damage the camera.
· The battery must be removed from the camera or charger and must be replaced immediately in case of a strange smell, discoloration, deformation, overheating or leakage. Continued use of the battery may result in overheating, which can cause fire and/or explosion!

CHARGER
· Using the charger in the vicinity of broadcasting receivers may interfere with reception. Ensure a distance of at least 1 m (3 ft) between the charger and the receiver.
· When the charger is in use, it may emit a buzzing sound ­ this is normal and not a malfunction.
· Disconnect the charger from the mains when it is not in use, as it consumes electricity (a very small amount), even if no battery is inserted.

· Never throw batteries into a fire as they may explode.

· Always keep the charger contacts clean, and never short circuit
them. 9

EN MEMORY CARD

TRIPOD

Safety remarks

· Never remove the memory card during a datasave or card reading process. The camera must not be switched off or be subjected to impact or vibrations while working.
· Do not open the cover/remove the memory card or the battery while the status LED is lit, which indicates memory access. Data on the card may otherwise be destroyed and camera malfunctions may occur.
· Do not drop or bend memory cards as this will cause damage and result in the loss of stored data.
· Do not touch the connections on the reverse of the memory card and keep them clean and dry.
· Keep memory cards out of the reach of children. Swallowing a memory card may cause suffocation.

· When using a tripod, make sure it is standing securely and turn the camera only by turning the tripod, not the actual camera. Ensure that the tripod screw is hand-tightened only. Avoid transporting the camera while the tripod is attached. You might injure yourself or others and the camera could get damaged.
FLASH
· The use of incompatible flash units with your Leica Q2 Monochrom may result in irreparable damage to the camera and/or the flash unit.

SENSOR
· Cosmic radiation (e.g. during flights) may cause pixel defects.

CARRY STRAP
· Carry straps are usually made of very robust material. You should therefore keep it out of the reach of children. A carry strap is not a toy and poses a strangulation risk.
· Use the carry strap only for its intended purpose on a camera or on binoculars. Any other use poses the risk of injury and may possibly result in damage to the carry strap and is therefore not permitted.
· Carry straps should also not be used for cameras/binoculars during sports activities that pose a risk of entanglement (e.g. when mountain climbing and similar outdoor activities).

10

EN 11

Safety remarks

EN GENERAL INFORMATION

RECHARGEABLE BATTERY

General information

Please read the section about “Care/Maintenance” for more information about what to do in case of problems.
CAMERA/LENS (For system cameras)
· Make a note of the serial numbers of your camera (engraved in the base of the camera housing) and lenses, as this information will be extremely important in case of loss.
· Make sure to always have a lens or the camera bayonet cover attached to prevent dust or other foreign bodies penetrating the camera.
· That is why you should always replace lenses quickly and in a dust-free environment.
· Never store the camera bayonet cover or the lens back cover in a pants pocket, as they will attract lint and dust, which could then be accidentally introduced into the camera.

LCD PANEL
· Condensation may form on the LCD panel if the camera is exposed to great temperature fluctuations. Wipe the screen carefully with a soft, dry cloth.
· The screen image will initially be slightly darker than normal if the camera is very cold when it is switched on. The normal level of brightness will be reached as soon as the LCD panel warms up.

· The battery must have a temperature between +10°C and +30°C for charging (otherwise the charger will not switch on or will switch off again immediately).
· Lithium-ion batteries can be charged at any time, regardless of their current charge level. A partially charged battery will charge to full capacity faster than a fully discharged one.
· The rechargeable batteries come only partly charged ex works and should therefore be charged fully before their first use.
· A new battery only reaches its full capacity after it has been fully charged and ­ by using it in the camera ­ depleted 2 to 3 times. This depletion process should be repeated roughly every 25 cycles.
· Battery and charger heat up during the charging process. That is normal and not a malfunction.
· Rapid flashing of the two LEDs (> 2 Hz) when charging commences indicates a charging error (e.g. maximum charging time exceeded, voltages or temperatures outside permitted ranges or a short circuit). Disconnect the charger from the mains and remove the battery. Ensure that the above temperature conditions are met and then restart the charging process. Please contact your dealer, the Leica representative in your region or Leica Camera AG if the problem persists.
· Rechargeable lithium-ion batteries generate power by way of internal chemical reactions. These reactions are influenced by ambient temperature and humidity. To ensure a maximum service life of the battery, it should not be exposed to extreme temperatures (high or low) for extended periods of time (e.g. in a parked car in the summer or winter).
· However, every battery has a limited service life! After several hundred charging cycles, this limitation will become evident as the operating times get significantly shorter.

12

· The replaceable battery supplies power to a backup battery,

that was formatted in another device (e.g. a computer) for the

EN

which is permanently installed in the camera. This backup

first time.

General information

battery retains the date and time for some weeks. Once the backup battery is depleted, it must be replenished by inserting a charged main battery. The time and date will have to be set again after a full depletion of both batteries.

· We recommend backing up your data on a PC, because electromagnetic fields, static electricity and any damage to the memory card or camera defects may result in irretrievable damage or loss of your data.

· As the battery capacity deteriorates or if using an older battery, warning messages may appear and some functions may be restricted or blocked entirely.

· SD, SDHC, and SDXC memory cards come with a write protection slider to prevent accidental overwriting. This slider is located on the non-beveled side of the card. All data on the card

· Always remove the battery if the camera will not be used for an

is protected when the slider is set to its lower position, marked

extended period of time. Make sure to switch the camera off via

LOCK.

the main switch before removing the battery. Leaving the battery in the camera will result in a deep discharge after a few weeks. Voltage levels will decrease significantly, as the camera uses a low idle current to maintain settings.

· All data stored on a memory card will be lost during formatting. Formatting will not be prevented by the deletion protection set for individual pictures.

· Dispose of damaged batteries in accordance with the relevant regulations at an approved collection point for proper recycling.
· The date of manufacture can be found on the battery. The date format is week/year.

SENSOR
· Any dust or dirt particles stuck to the glass cover of the sensor may result in noticeable dark stains or specks on the pictures (in system cameras). You can send your camera to the Leica

MEMORY CARD

Customer Care department for sensor cleaning (see p. 164). This service is not part of the warranty offering and will therefore

· The range of available SD/SDHC/SDXC cards on the market is

incur charges.

too extensive for Leica Camera AG to test for compatibility and

quality. Generally, any type of memory card may be used without any damage to the camera or memory card. As some “no name” cards may not fully comply with the SD/SDHC/SDXC standards, Leica Camera AG cannot provide any guarantee of function.
· We recommend formatting memory cards from time to time, as fragmented residual data from deleted files may block some of the storage capacity.
· Generally, it is not necessary to format (initialize) memory cards

DATA
· All data, including personal information, may be changed or deleted due to incorrect or accidental operation, static discharge, accidents, malfunctions, repairs and other measures.
· Please note that Leica Camera AG does NOT accept liability for direct or consequential damage due to the manipulation or destruction of data and personal information.

that have been previously used. Formatting will, however, be

necessary if you insert an unformatted memory card or a card 13

General information

FIRMWARE UPDATE

Leica is continuously working on the further development and optimization of Leica Q2 Monochrom. As digital cameras have many functions that are controlled electronically, improvements and enhancements to the functions can be installed on the camera retroactively. Leica releases what are known as firmware updates at irregular intervals. Cameras are always supplied ex works with the latest firmware installed or you can download the latest version from our website yourself and transfer it to your camera. You will receive a newsletter informing you of the availability of a new firmware update if you register your camera on the Leica Camera homepage. Visit the download section or the “Customer Area” for information about how to register or how to get firmware updates for your Leica Q2 Monochrom. Additionally, you can find information about changes or additions to the manual at: club.leica-camera.com Leica releases firmware updates for lenses at irregular intervals. You can download any new firmware version from our homepage and transfer it to your lens. Please see p. 136 for more information. Select the menu item Camera Information (see p. 136) to check whether your camera and lenses are running the latest firmware version.
14

WARRANTY

EN

Warranty

In addition to your statutory warranty rights regarding your dealer, you will receive an additional Leica Camera AG product warranty valid from the date of purchase at an authorized Leica retailer. Previously, the product warranty was included with the product in the packaging. From now on, the product warranty will only be available online as a new service. You will be able to review the warranty conditions for your product at any time, without having to search fr the document. Please note that this new policy applies only for products that are no longer delivered with a hardcopy product warranty included in the packaging. Any products still delivered with the warranty document in the packaging remain governed exclusively by that document. For more information regarding the warranty scope, services and limitations, please visit: warranty .leica-camera.com

Leica Q2 Monochrom comes with splash water and dust protection. The camera was tested under controlled laboratory conditions and is classes as IP52 in accordance with DIN EN 60529. Please note: The splash water and dust protection coating is not permanent and will diminish over time. Please read the section on “Care/Storage” for detailed instructions on how to clean and dry the camera. The warranty does not cover liquid damage. Any attempt to open the camera casing by an unauthorized retailer or service partner will cause an immediate expiration of the splash water and dust warranty.

Definition of the various categories of information found in this manual
Note Additional information
Important Failure to comply with instructions may result in damage to the camera, the accessories or the recordings

LEICA Q2 MONOCHROM
1 Main switch 2 Shutter button 3 Shutter speed setting dial 4 Thumbwheel 5 Thumbwheel button 6 Strap lugs 7 Accessory shoe 8 Microphone 9 Self-timer LED/AF assist light 10 Viewfinder eyepiece 11 Eye sensor 12 Diopter setting wheel 13 Zoom/Lock button 14 PLAY button 15 FN button 16 MENU button 17 LCD panel 18 Status LED 19 Directional pad 20 Center button 21 Speaker 22 Memory card slot 23 Tripod thread 24 Battery release lever 25 Battery compartment

LENS “SUMMILUX 28 f/1.7 ASPH.”

EN

Part Designations

26 Alignment point for macro function 27 Macro setting ring 28 Focus ring 29 Aperture setting ring 30 Thread protection ring 31 AF/MF lock release 32 Focus tab

21

EN DISPLAYS

IN REVIEW/PLAYBACK MODE

The images displayed on the LCD panel and in the viewfinder are identical.

All displays/values refer to the displayed image.

13 20 18 15 23

19 24 28

Displays

PHOTO
29
STATUS SCREEN

01

02 03

04

05

06

07

08 09 13 14 18 19

10

11

12

15 16 17

20 21 22

08 11 09

07

10

30

WHEN TAKING A PICTURE

All displays/values refer to the actual settings.

13 20 18 15

19 24 3

ACTIVATED Capture Assistants

33

31

32

34

37 36

25

35

22

08 11 09

07

26

27

10

02

01 Focal length

28 Icon for marked picture

EN

02 Remaining memory capacity

29 File name

Displays

03 Battery capacity

30 File number of the picture shown

04 Menu section PHOTO

31 Histogram

05 Menu sections VIDEO

32 Grid lines

06 Light balance

33 Clipping identification of overexposed subject elements

07 Exposure compensation scale 08 Exposure mode 09 Exposure value 10 Shutter speed 11 ISO Sensitivity 12 Exposure compensation value 13 Focus mode

34 Automatic magnification as focus assistance for manual focusing (3x or 6x magnification available)
35 Focus peaking (identification of in sharp edges in the object)
36 Level gauge
37 Display of cropped section size and position (only visible for enlarged sections)

14 Autofocus metering method

15 Picture mode (Drive Mode)

16 Self-timer

17 User profile

18 Exposure metering method

19 Toning

20 File format/compression level/resolution

21 Leica FOTOS

22 Favorites menu / Main menu

23 Flash mode/flash exposure compensation

24 Stabilization activated

25 AF Field

26 Bluetooth® (Leica FOTOS)

27 Automatic storage of the recording location (Exif data)

(Only while connection to Leica FOTOS is active)

23

EN VIDEO

Displays

STATUS SCREEN

38 43

41

42

44

45

39 40

46 47 51 52 56 57

48

49

50

53 54 55

58 59 60

WHEN TAKING A PICTURE All displays/values refer to the actual settings.

51

58

43 57 61 40

62

44

46 49

47

45

24

48

39

IN REVIEW/PLAYBACK MODE All displays/values refer to the displayed image.

51

58

63 57 61 64

65

44

66

67

68

69

70

71

38 Focal length

65 File name

EN

39 Remaining memory capacity

66 File number of the picture shown

Displays

40 Battery capacity

67 Video editing function

41 Menu section PHOTO

68 Exiting video playback

42 Menu sections VIDEO

69 Current time of the playback

43 Microphone recording level

70 Playback status bar

44 Light balance

71 Playback volume

45 Exposure compensation scale

46 Exposure mode

47 Exposure value

48 Shutter speed

49 ISO Sensitivity

50 Exposure compensation value

51 Focus mode

52 Autofocus metering method

53 Microphone sensitivity (Microphone Gain)

54 Video stabilization

55 User profile

56 Exposure metering method

57 Toning

58 Resolution / Frame rate

59 Leica FOTOS

60 Favorites menu / Main menu

61 Stabilization activated

62 Indicates recording in progress

63 Length of recording

64 Icon for marked picture 25

EN CHARGE STATUS INDICATOR ON THE LCD PANEL
The battery charge status is displayed in the status screen and in the header line at the top right.

Displays

Display

Charge status approx. 75 – 100% approx. 50 – 75% approx. 25 – 50% approx. 0 – 25% approx. 0%
The battery needs charging or replacing

26

EN 27

Displays

EN PREPARATION
ATTACHING THE CARRY STRAP

PREPARING THE CHARGER
Use the mains cable with the matching regional plug to connect the charger to mains electricity.

Preparation

Attention · Once you have attached the carry strap, please make sure that
the clips are mounted correctly to prevent the camera from falling.

Note · The charger will automatically adapt to local mains voltage.

28

Preparation

CHARGING THE BATTERY
The camera is powered by a lithium-ion battery.
INSERTING THE BATTERY IN THE CHARGER

CHARGE STATUS INDICATORS ON THE CHARGER

EN

The status LED indicates a correct charging process.

Slide the battery into the charger with the groove facing up until the contacts meet
Press down on the battery until you can hear and feel it clicking into place
Ensure that the battery is fully inserted into the charger

REMOVING THE BATTERY FROM THE CHARGER

Tilt the battery up and lift it out at an angle

Display

Charge status

CHARGE flashes green

battery is charging

80% lights up orange 80%

CHARGE continuous green light

100%

Charge time*
approx. 2 h approx. 3½ h

Disconnect the charger from mains electricity when the charging process is complete. There is no risk of overcharging.

• for a completely discharged battery

29

Preparation

EN INSERTING/REMOVING THE BATTERY
Ensure that the camera is switched OFF (see p. 34) INSERTION

REMOVAL
1 2
3

Insert the battery into the slot with the groove pointing towards the LCD panel and gently push until you hear and feel it clicking into place

Turn the battery release lever · Battery is pushing out slightly.
Press down on the battery lightly · The battery unlocks and pushes out fully.
Removing the battery
Important · Removing the battery while the camera is switched on may
result in the loss of custom settings or damage to the memory card.

30

INSERTING/REMOVING THE MEMORY CARD

Ensure that the camera is switched OFF (see p. 34)

EN

Preparation

The camera will save exposures to an SD (Secure Digital), SDHC (High Capacity) or SDXC (eXtended Capacity) memory card.

OPENING THE COVER OVER THE MEMORY CARD SLOT

Notes · SD/SDHC/SDXC memory cards are available from various
suppliers in various sizes and with differing read/write speeds. Memory cards with high storage capacities and high read/write speeds offer quick storage and rendering.
· The memory card may not be supported (capacity) or will have to be formated in the camera before first use (see p. 134). The camera will in that case display a relevant message. Please see the section “Technical Data” for information about supported cards.
· Check the memory card for correct alignment if you are having difficulties inserting it into the camera.
· See p. 10 and p. 13 for additional information.
· Video recordings require a high write speed.

Slide the cover as shown in the illustration until you hear a click · The cover lifts automatically.
CLOSING THE COVER OVER THE MEMORY CARD SLOT

Close and hold down the cover Slide the cover as shown in the illustration until it audibly clicks
into place
31

Preparation

EN INSERTION

ATTACHING/DETACHING THE LENS HOOD
This camera comes with a matching lens hood. It is pre-mounted ex works. The use of the lens hood is recommended to reduce vignetting.
DETACHING

Push the memory card into the slot with the contacts pointing towards the LCD panel until you hear and feel it clicking into place
REMOVAL

Fig. 1

Fig. 2

Unscrew the lens hood in counter-clockwise direction (Fig. 1) Screw on the thread protection ring (Fig. 2)

Push down on the card until you hear a click · The card pushes out slightly.
Remove the memory card

32

ATTACHING

DIOPTER ADJUSTMENT

EN

The viewfinder has a diopter setting function with a range between +3 and -4 diopter to allow glasses wearers the use of the camera without eyeglasses (Diopter adjustment).

Preparation

Fig. 1

Fig. 2

Unscrew the thread protection ring in counter-clockwise direction (Fig. 1)
Screw on the lens hood in clockwise direction to the stop (Fig. 2)
Notes · The lens hood cover supplied will only fit the lens hood and
cannot be used as lens cover on its own. · A matching lens front cap E49 (Order No. 14001) is available as
an optional accessory for use of the camera without the lens hood: store .leica-camera.com

Push the diopter setting wheel into its groove until you hear an audible click · This unlocks the diopter setting wheel and it pushes out a little.
Look through the viewfinder
Turn the diopter setting wheel until you see the image in the viewfinder and the displays in perfect focus
Push the diopter setting wheel back into its groove until it audibly clicks into place

33

Camera operation

EN CAMERA OPERATION
CONTROL ELEMENTS MAIN SWITCH
The main switch switches the camera on and off. SWITCHING THE CAMERA ON

SWITCHING THE CAMERA OFF

Note · The function Auto Power Off (see p. 55) deactivates the
camera automatically if no operation occurs within a preset time. Use the main switch to deactivate the camera if this function is Off to prevent inadvertent exposures and battery discharge when the camera is not in use.
Notes · Once switched on, the camera will be ready to use after approx.
1 s. · The LED lights up briefly and the displays in the viewfinder
appear.

34

Camera operation

SHUTTER BUTTON

2. Press down fully

EN

­ Shutter release

· The data is then transferred to the memory card.

­ Starting a preselected self-timer delay time

­ Starting a picture series or interval shooting

The shutter button works in two stages. 1. Tapping (= Pressing the shutter button to the 1st pressure
point) ­ Activating the camera electronics and displays ­ Metering memory lock (metering & saving):
­ saves the metered exposure value in aperture priority mode, i.e. the shutter speed calculated by the camera
­ Canceling a running self-timer delay time ­ Return to picture mode
­ from review/playback mode ­ from menu control ­ from standby mode

Notes · Press down the shutter button in a smooth motion until you hear
the click of the shutter to prevent camera shake. · The shutter button remains locked:
­ if the memory card inserted and/or the internal buffer memory are (temporarily) full
­ if the battery has exceeded its performance limits (capacity, temperature, age)
­ if the memory card is write-protected or damaged ­ if the sensor is too hot

35

Camera operation

EN SHUTTER SPEED SETTING DIAL

THUMBWHEEL

The shutter speed setting dial has no stop, which means it can be turned in either direction from any position. It will click at each engraved position and for intermediate values. Intermediate positions outside the click positions must not be used. Please read the section “Exposure” (see p. 78) for details about exposure settings.

­ A: Aperture priority (automatic shutter speed control)
­ 2000 – 1+: Fixed shutter speeds

­ Menu navigation ­ Exposure compensation value selection ­ Enlarging/reducing viewed pictures ­ Setting selected menu items/functions ­ Setting the program shift

36

THUMBWHEEL BUTTON
­ Applying menu settings ­ Direct access to menu functions ­ Accessing the submenu

DIRECTIONAL PAD/CENTER BUTTON

EN

Camera operation

DIRECTIONAL PAD ­ Menu navigation ­ Setting selected menu items/functions ­ Scrolling through the picture memory ­ Shifting the metering field (Field or Spot AF)
CENTER BUTTON ­ Accessing the information display ­ Accessing the submenu ­ Applying menu settings ­ Display of settings/data when recording ­ Display of picture data during review ­ Playback of video recordings ­ Confirming the prompts
37

PLAY BUTTON/FN BUTTON/MENU BUTTON

ZOOM/LOCK BUTTON

Camera operation

PLAY BUTTON ­ Activation and deactivation of the (continuous) review/playback
mode ­ Return to full-screen display
FN BUTTON ­ Direct access to menu functions ­ Direct access to delete function
MENU BUTTON ­ Accessing the menu (incl. status screen) ­ Accessing the Playback/Review menu ­ Exiting the currently displayed (sub) menu

­ Direct access to menu functions ­ Marking/rating a recording

38

Camera operation

LCD PANEL (TOUCH SCREEN)

EN

TOUCH CONTROL* tap briefly

in picture mode
Shifting the AF metering field and focusing (while Touch AF is activated)

in playback/review mode Select the recording

double tap

Reseting the AF metering field (while Touch AF is activated)

Enlarging/reducing viewed pictures

swipe

Scrolling through the picture memory Shifts the enlarged image section

horizontal swipe (full length)

Mode change (photo/video)

Scrolling through the picture memory

vertical swipe (full length)

Switch to playback/review mode

Switch to picture mode

touch and hold

Adjusting the size of the AF metering field

two-finger pinch/ spread

Enlarging/reducing viewed pictures

swipe and hold/ hold and swipe

Shifting the AF metering field and focusing (while Touch AF is activated)

Continuous scrolling

39 * A light touch is enough, don’t apply pressure.

Camera operation

EN MENU CONTROL
CONTROL ELEMENTS The following elements are used for menu control.
5 4

14

15

19

20

16

14 PLAY button 15 FN button 16 MENU button

5 Thumbwheel button 4 Thumbwheel 19 Directional pad 20 Center button

MENU SECTIONS The following menu sections are available: Status Screen, Main Menu and Favorites.
Status screen: ­ quick access to the most important settings
Favorites: ­ your custom list (see p. 50 for details on how to manage this
list)
Main Menu: ­ offers access to all menu items ­ contains various submenus
Note · The favorites menu can only be displayed if it has at least one
menu item assigned.

40

STATUS SCREEN

MAIN MENU

EN

Photo

Video

Camera operation

FAVORITES

41

Camera operation

EN

SWITCHING MENU SECTIONS

The status screen will always be displayed as the first menu section. The top menu level is organized into pages, which are displayed in the header line: Status Screen, Favorites Menu (up to 2 pages) and five subsections of the main menu. You can switch between menu sections by scrolling through the pages. Alternatively, the status screen and the favorites menu offer access to the main menu as their respectively last menu item.

To scroll forward
Press the MENU button · The status screen will appear again after page 5 of the main menu.
To scroll backward
Press the directional pad left · In reverse order, you can only browse back to the status screen.

42

STATUS SCREEN The status screen offers an overview of the most important information regarding the current camera status and active settings. It furthermore allows direct access to important settings. The status screen is optimized for touch control.
A
B
C D
A Mode: picture/video B Exposure settings (see p. 78 and p. 106) C Menu items D Access to the main menu

Notes

EN

· Where touch control is not possible or not desirable (e.g. in EV

mode), the status screen can alternatively be controlled via the

Camera operation

directional pad, center button, thumbwheel and the thumbwheel

button.

· The settings become effective immediately.

· The framed control panels can be selected. Unframed values are

added in automatically (depending on the active exposure

mode).

· The available menu items in picture and video mode differ.

43

Camera operation

EN

SELECTING SETTINGS

Settings can be selected in various ways from within the status screen. The setting types vary from menu to menu.

Briefly touch the desired control panel

· The relevant menu appears.

ACCESSING A STANDARD SUBMENU These menus behave as if they were accessed from within the main menu (see p. 45). Touch control is therefore unavailable. From there, you return to the status screen and not to the next higher menu item.

DIRECT SETTINGS A version of the menu bar appears in the lower area of the status screen (see p. 48).

Select the desired function directly or swipe

Select the desired setting

44

Camera operation

FAVORITES MENU

SUBMENU

EN

The favorites menu offers quick access to the most frequently used menu items. It can contain up to 15 menu items. These can be assigned individually (see p. 50).

There are various types of submenus available. The following pages describe their operation.

A

A

B

D

B C

MAIN MENU The main menu offers access to all settings. Most of these are organized in submenus.
A

B

C

A Current menu item B Submenu item C References to other submenus D Scrollbar
There are various types of submenus available. The following pages describe their operation.

D
A Menu sections: Main Menu and Favorites B Menu item name C Menu item setting D Submenu reference
45

EN MENU NAVIGATION SCREEN BY SCREEN NAVIGATION To scroll forward

SHOW SUBMENU
Press the center button/thumbwheel button or Press the directional pad to the right

Camera operation

Press the MENU button (repeatedly if needed) · The status screen will appear again after page 5 of the main menu.
To scroll backward
Press the directional pad left · In reverse order, you can only browse back to the status screen.
LINE BY LINE NAVIGATION (Function/function option selection)
Press the directional pad up/down or
Turn the thumbwheel (to the right = down, to the left = up) · Once the last menu item has been reached scrolling up or down, the display will automatically jump to the previous or next screen. The currently active menu section (Favorites, Main Menu) is not exited.

CONFIRM SELECTION
Press the center button/thumbwheel button · The screen image changes back to the active menu item. The set function variant is shown on the right in the relevant menu line.
Note · No confirmation is needed for the selection of On or Off. An
automatic save is done.

EXITING THE MENU

You can exit the menus and submenus at any time ­ with/without

A

applying the settings selected there.

go to picture mode

B

Tap the shutter button go to review mode

C

E

D

Press the PLAY button

A Entry line B Keyboard/Number pad C “Delete” button (deletes the last character entered) D “Confirm” button
(to apply individual values and existing settings) E Return to previous menu level F Shift key (toggles between upper and lower case letters) G Changing the character type

SELECTING A BUTTON (ICON/FUNCTION BUTTON)

Camera operation

Using button control
Press the directional pad left or right as needed · The currently active button will be highlighted.
or
Turn the thumbwheel · The currently active button will be highlighted. · There will be an automatic jump to the next/previous line when the end/beginning of the line is reached.
Press the center button

Using touch control Press the button of your choice

SAVE Select button D
CANCEL Select button E

MENU BAR
Using button control Press the directional pad left/right or Turn the thumbwheel Using touch control Select the desired function directly or swipe Notes · The currently active setting displayed in the center is highlighted
in red. · The set value is displayed above the scale/below the menu bar. · The following applies for direct access: The selected function
requires no additional confirmation and will be active immediately.

Using button control Press the directional pad left/right or Turn the thumbwheel
Using touch control Select the desired setting directly or swipe
Note · The currently active setting displayed in the center is highlighted
in red.

To move to the next settings field Press the directional pad left/right To set values Press the directional pad up/down or Turn the thumbwheel To save and return to superordinate menu item Press the center button

Select Customize Control in the main menu Select Edit Favorites

Assign your most frequently used menu items to a favorites menu (up to 15 items) for quick and easy access. The available functions are shown in the list on p. 150.

The favorites menu will be represented by an asterisk in the header line, provided it contains at least one menu item.

Select the desired menu item

Select On/Off · A warning message appears when the favorites menu has reached the maximum of 15 menu items and no further items can be added.
Note · The favorites menu will be deleted completely if all menu items
are set to Off

Camera operation

You can assign specific menu functions to the following operating elements for extra quick direct access to menu items in recording mode. The available functions are shown in the list on p. 150.

The two following buttons additionally allow a quick assignment of menu functions from a custom list of items. ­ FN button (factory setting: Self Timer) ­ Thumbwheel button (factory setting: ISO)

5 13
4

CREATING THE CUSTOM LIST

Select Customize Control in the main menu

Select FN button/Right Wheel Button

Select On or Off for each menu item

15

· You can activate a maximum of 8 menu items for this list.

13 Zoom/Lock button 15 FN button

5 Thumbwheel button 4 Thumbwheel

Notes · The submenus accessed via direct access may look differently
than when they are accessed via the main menu. Specifically, they often appear as menu bars to allow quick settings.
· The settings can be done via key control or using touch control on the LCD panel. The operating mode depends on the type of submenu.

CHANGING AN ASSIGNMENT Press and hold the FN button / thumbwheel button
· The direct access list you have created will appear on the LCD panel.
· This list can be modified at any time via the menu item Customize Control.
Select the menu item you want by pressing the center button · You will not be prompted to acknowledge your selection. The change is applied immediately.
ACCESSING THE ASSIGNED MENU FUNCTION Press the FN button/thumbwheel button briefly
· The assigned function is accessed, or a submenu appears on screen.

The two following operating elements can only be assigned one of the preset functions via menu control. A custom list is not available. ­ Zoom/Lock button ­ Thumbwheel

Factory setting: Auto You can assign the exposure compensation function to the thumbwheel permanently.
Select Customize Control in the main menu Select Wheel Assignment

ZOOM/LOCK BUTTON

Select Exp. Comp.

Factory setting: Digital Zoom Alternatively, you can assign automatic exposure metering and/or metering memory lock to the Zoom/Lock button.

The thumbwheel has varying functions depending on the exposure mode (see p. 79) when it is set to Auto.

Select Customize Control in the main menu Select Zoom/Lock-Button Select Digital Zoom, AF-L + AE-L, AE-L or AF-L

Off
P No function

Auto
Program shift

Exp. Comp.
Exposure compensation

ACCESSING THE ASSIGNED MENU FUNCTION Press the Zoom/Lock button briefly

A No function S No function

Shutter speed
Exposure compensation

Exposure compensation
Exposure compensation

M No function

Shutter speed

Exposure compensation

ACCESSING THE ASSIGNED MENU FUNCTION Turn the thumbwheel to the left/right

52

EN 53

Camera operation

EN CAMERA BASIC SETTINGS

DATE/TIME

Camera basic settings

For details on how to navigate in the menus and for inputs see chapter “Menu control” (see p. 40). · The two menu items Language and Date & Time appear automati-
cally when switching the camera on for the first time, after a reset to factory settings (see p. 136), or after a firmware update.
MENU LANGUAGE
Factory setting: English Available menu languages: German, French, Italian, Spanish, Russian, Japanese, Korean, Traditional or Simplified Chinese
Select Language in the main menu Select your language
· Aside from a few exceptions, the language will be changed for all information.

DATE You can choose one of 3 options. Select Date & Time in the main menu Select Date Setting Select the desired date format
(Day/Month/Year, Month/Day/Year, Year/Month/Day) Set the date
TIME
Select Date & Time in the main menu Select Time Setting Select the desired brightness
(12 Hours, 24 Hours) Set the time
(Select am or pm for the 12-hour format)

54

Camera basic settings

TIME ZONE

POWER SAVE MODE (STANDBY MODE)

EN

Select Date & Time in the main menu Select Time Zone Select your time zone/current location
­ The Greenwich Mean Time offset is shown on the left of the line
­ Major cities in the relevant time zones are shown on the right

The camera will switch to the power-saving standby mode after a preset time to extend battery life if this function is activated. The device has three power save levels. ­ Activates device standby mode in seconds ­ Activates device standby mode in minutes ­ Automatic LCD panel shutdown (see p. 58)

DAYLIGHT SAVING TIME
Select Date & Time in the main menu Select Daylight Saving Time Select On/Off

AFTER A FEW SECONDS
The camera will switch to standby mode within a few seconds to maximize battery capacity. Factory setting: Off
Select Power Saving in the main menu Select Power Saving Mode Select the desired setting
(Off, 3 s, 5 s, 10 s)

AFTER A FEW MINUTES
Factory setting: 2 min
Select Power Saving in the main menu Select Auto Power Off Select the desired setting
(Off, 2 min, /5 min, /10 min)
Note · The camera can be woken from standby mode at any time by
pressing the shutter button or by switching the main switch off and on again.

55

Camera basic settings

EN DISPLAY/VIEWFINDER SETTINGS
The camera comes equipped with a 3″ liquid crystal color panel, which is protected by a glass cover made of extremely hard and scratch-resistant Gorilla® glass. The following functions can be configured and used individually: ­ Use of the LCD panel and EVF (electronic viewfinder) ­ Eye sensor sensitivity ­ Brightness ­ Color rendering ­ Information display ­ Automatic LCD panel shutdown

LCD PANEL/EVF USE
You can preset the situations in which EVF and LCD panel should be used. The displays appearing on screen and in the viewfinder are identical. Factory setting: Auto

EVF

LCD panel

Auto The eye sensor in the viewfinder automatically toggles the camera between LCD panel and EVF.

· Recording · Playback/Review · Menu control

LCD

· Recording

· Playback/Review

· Menu control

EVF · Recording · Playback/Review · Menu control

EVF extended

Only EVF is used for picture mode. The eye sensor in the viewfinder automatically toggles the camera between LCD panel and EVF for playback and menu control.
· Recording · Playback/Review · Menu control

56

Camera basic settings

Select Display Settings in the main menu

BRIGHTNESS

EN

Select EVF-LCD

You can adjust brightness for best visibility in various lighting

Select the desired setting Note

conditions. Brightness is set individually for the LCD panel and the viewfinder. Selection occurs via key control or touch control.

· Select EVF if you want to keep the LCD panel switched off (e.g. on dark environments).

EYE SENSOR SENSITIVITY
You can adjust the eye sensor sensitivity to ensure that the changeover functions reliably if you wear eyeglasses. Factory setting: Low
Select Display Settings in the main menu Select Eye Sensor Sensitivity Select the desired setting

LCD PANEL
Select Display Settings in the main menu Select LCD Brightness Select the desired brightness of Auto Confirm selection

EVF
Select Display Settings in the main menu Select EVF Brightness Look through the viewfinder Select the desired brightness Confirm selection
Note · The setting Auto is not available here.

57

Camera basic settings

EN COLOR RENDERING

Monochrome Digital Compact Camera

Color rendering can also be adjusted. Brightness is set individually for the LCD panel and the viewfinder. Selection occurs via key control or touch control.

The LCD panel deactivates automatically to save power. Factory setting: 1 min Select Power Saving in the main menu

Select All Displays Auto Off

Select the desired setting (30 s, 1 min, 5 min)

LCD PANEL
Select Display Settings in the main menu Select LCD Color Adjustment Select the desired color setting Confirm selection

EVF FRAME RATE
The image frequency of the EVF can be set.
Select Display Settings in the main menu Select EVF Frame Rate Select the desired setting
(60 fps, 120 fps)

EVF
Select Display Settings in the main menu Select EVF Color Adjustment Look through the viewfinder Select the desired color setting Confirm selection

58

Camera basic settings

ACOUSTIC SIGNALS

AUTOFOCUS CONFIRMATION

EN

Some functions can be acknowledged with acoustic signals. The following special functions can be configured separately: ­ Electronic shutter sound ­ AF confirmation

A signal sound can be selected for successful AF settings. Select Acoustic Signal in the main menu Select AF Confirmation Select On

VOLUME The volume of active signals can be set. Select Acoustic Signal in the main menu Select Volume Select Low/High

SILENT PHOTOGRAPHY When pictures should be taken as quietly as possible. Select Acoustic Signal in the main menu Select Electronic Shutter Sound/AF Confirmation/Acoustic Signals Select Off for each of these menu items

ACOUSTIC SIGNALS
This setting specifies, whether the camera shout output general notification signals, e.g. during the delay time of the self-timer or as a warning signal, when the memory card is full.
Select Acoustic Signal in the main menu Select Acoustic Signals Select On

ELECTRONIC SHUTTER SOUND
Select Acoustic Signal in the main menu Select Electronic Shutter Sound Select On

59

Camera basic settings EN ELECTRONIC SHUTTER
The Leica Q2 Monochrom comes equipped with a mechanical shutter and a purely electronic shutter function. The electronic shutter expands the available shutter area and functions completely noiseless, which may be important in some work environments.
Select Electronic Shutter in the main menu Select the desired setting

Off Always On

Only the mechanical shutter is used. Working range: 120 s to 1/2000 s.
Only the electronic shutter function is used. Working range: 1/2500 s to 1/40000 s.

Extended

You can add in the electronic shutter functions if you need faster shutter speeds than can be achieved with the mechanical shutter. Working range: 120 s to 1/2000 s + 1/2500 s to 1/40000 s.

60

EN 61

Camera basic settings

Basic recording settings (picture)

EN BASIC RECORDING SETTINGS (PICTURE)
FILE FORMAT
Choose the JPG format JPG or the standardized raw data format DNG (= digital negative). These can be used individually or simultaneously. Factory setting: DNG + JPG

Notes · The standardized DNG (Digital Negative) format is used for the
storage of raw picture data.
· When picture data is saved in DNG and in JPG format simultaneously, then the camera will use the resolution setting for the JPG format is used for the JPG file.
· The DNG format always works with the highest available resolution, no matter what JPG setting is selected.
· The remaining number of frames shown in the LCD panel will not necessarily change after every picture taken. That very much depends on the object; very fine image structures result in higher data quantities, while homogeneous surfaces mean less data.

Select Photo File Format in the main menu
Select a format (DNG, DNG+JPG, JPG)

62

Basic recording settings (picture)

JPG SETTINGS
The functions and settings described in this section apply for pictures taken in JPG format only.

RESOLUTION

EN

The JPG format setting offers 3 image resolution (number of pixels) options. L-JPG (47 MP), M-JPG (24 MP) and S-JPG (12 MP). You can therefore adjust your settings to the intended use and available memory card capacity.
Factory setting: L-JPG

Select JPG Settings in the main menu Select JPG Resolution Select the desired resolution

When the Digital Zoom function (see p. 93) is selected, then images will be saved with the following actual resolutions.

L-JPG M-JPG S-JPG

28 mm
47 MP 24 MP 12 MP

Digital Zoom 35 mm 30 MP 15 MP 8 MP

Digital Zoom 50 mm 15 MP 8 MP 4 MP

Digital Zoom 75 mm 7 MP 3 MP 2 MP

63

Basic recording settings (picture)

EN IMAGE PROPERTIES

TONING

One of the many advantages of digital photography is that it is very easy to change key image properties.
You can manipulate contrast, sharpness and toning before recording.

A color tone can be added to recordings. The color and intensity of this effect can be adjusted. Factory setting: Off

CONTRAST
The contrast setting, i.e. the difference between light and dark image sections, determines whether an image comes across as “flat” or “brilliant”. Increasing or decreasing this difference impacts on contrast, meaning that some image sections are rendered with more or less light. Factory setting: Standard
Select JPG Settings in the main menu Select Contrast Select the desired level
(Low, Medium low, Standard, Medium high, High)
SHARPNESS
The impression of sharpness in a picture is largely determined by edge sharpness, i.e. by how slight the transition area between light and dark is at edges in the picture. Expanding or reducing these areas will therefore change the impression of sharpness. Factory setting: Standard
Select JPG Settings in the main menu Select Sharpness Select the desired level
(Low, Medium low, Standard, Medium high, High)

Select JPG Settings in the main menu
Select Toning
Select the desired setting (Sepia (weak), Sepia (strong), Blue (weak), Blue (strong), Selenium (weak), Selenium (strong))

64

Basic recording settings (picture)

IMAGE STABILIZATION

EN

The less favorable the lighting conditions during recording, the slower will be the required shutter speeds for correct exposure. Visual image stabilization is a great tool for preventing out-of-focus images due to blurring.
Factory setting: Auto

Select Optical Image Stabilization in the main menu
Select the desired setting (On, Off, Auto)

65

EN BASIC RECORDING SETTINGS (VIDEO)

MICROPHONE

Basic recording settings (video)

FILE FORMAT
Videos are recorded in MP4 format.
VIDEO FORMAT
Video can be recorded in the formats C4K (Cinema4K) (4096 x 2160 pixel), +4 (3840 x 2160 pixel) or Full HD (1920 x 1080 pixel). Video can be recorded with different frame rates if 4K or Full HD is selected. ­ 4K: 24 fps (frames per second), 30 fps ­ Full HD: 24 fps, 30 fps, 60 fps, 120 fps

The sensitivity of the integrated microphone can be set. Factory setting: Medium Select Video Settings in the main menu Select Microphone Gain Select the desired level
(High, Medium, Medium low, Low, Off)
Note · The Autofocus function and manual focal length adjustments
generate noise that may be picked up in the recording.
WIND NOISE REDUCTION
Factory setting: On

You can therefore adjust your settings to the intended use and available memory card capacity.
Select Video Resolution in the main menu
Select the desired resolution / frame rate (C4K / 24 fps, 4K / 30 fps, 4K / 24 fps, Full HD / 120 fps, Full HD / 60 fps, Full HD / 30 fps, Full HD / 24 fps)

Select Video Settings in the main menu Select Wind Noise Reduction Select On/Off
VIDEO STABILIZATION
The stabilization function helps to reduce blurring for handheld recordings.

Select Video Settings in the main menu Select Video Stabil. Select On/Off

66

Basic recording settings (video)

IMAGE PROPERTIES

TONING

EN

The image properties for video recordings are easy to customize. You can manipulate contrast, sharpness and toning before recording.

Factory setting: Off Select Video Style Settings in the main menu Select Toning

CONTRAST Factory setting: Standard Select Video Style Settings in the main menu

Select the desired setting (Sepia (weak), Sepia (strong), Blue (weak), Blue (strong), Selenium (weak), Selenium (strong))

Select Contrast

Select the desired level (Low, Medium low, Standard, Medium high, High)

SHARPNESS Factory setting: Standard Select Video Style Settings in the main menu Select Sharpness Select the desired level
(Low, Medium low, Standard, Medium high, High)

67

Picture Mode

EN PICTURE MODE
DRIVE MODE
The functions and settings described in the following generally refer to the exposure of individual pictures. In addition to single frame shots, the Leica Q2 Monochrom offers a number of other picture modes. Please read the relevant sections for information about functionalities and setting options. Select Drive Mode in the main menu Select the desired function options

Mode

Setting options / Variants

Single frame exposure Single

Serial exposures (see p. 88)

Speed: ­ Continuous – Low Speed ­ Continuous – High Speed

Self-timer (see p. 92)

Delay time: ­ Self Timer 2 s ­ Self Timer 12 s

Interval shooting (see p. 89)

Number of Frames Interval between the pictures (Interval) Delay time (Countdown)

Exposure bracketing (see p. 91)

Number of Frames (3 or 5) EV Steps Exposure Compensation

68

FOCUSING

AUTOFOCUS MODES

EN

Picture Mode

Your Leica Q2 Monochrom allows automatic as well as manual focusing. There are 2 operating modes and 3 metering methods available for AF photography.

The following AF modes are available: AFs and AFc. The currently selected AF mode is shown in the header line.
AFs (single)

AF PHOTOGRAPHY
Press and hold the AF/MF release button Turn the focus ring to the AF position Position the AF metering field as needed

Suitable for objects with little or no movement. Focusing is done only once and the setting remains as long as the shutter button is held at the pressure point. That also applies if the AF metering field is pointed at another object.

Tap and hold the shutter button · Focusing occurs one time (AFs) or continuously (AFc). · Metering was successful: The AF metering field lights up green. · Metering was unsuccessful: The AF metering field lights up red. · Alternatively, focus settings and/or exposure settings can be done and saved via the Zoom/Lock button (“Exposure lock”, see p. 84).

AFc (continuous)
Suitable for objects in motion. As long as the shutter button is held at the 1st pressure point, focusing is continuously adjusted to the object in the AF metering field.
Select Focusing in the main menu Selecting Focus Mode Select the desired setting

Shutter release

MF PHOTOGRAPHY
Press and hold the AF/MF release button Turn the focus ring away from the AF position Use the focus ring to manually focus on the object Shutter release

Please read the following chapters for more information.

69

EN AUTOFOCUS METERING METHODS

MULTI-FIELD METERING

Picture Mode

The AF mode offers various metering methods for focusing. A successful focus setting is identified by a green metering field, an unsuccessful one is shown in red.
Factory setting: Multi-Field

Several metering fields are detected automatically. This function is particularly useful for snapshots.

SPOT/FIELD METERING

Both methods detect only those parts of the object that are within the relevant AF metering fields. The metering fields are indicated by a small frame (field metering) or a cross (spot metering). The very small measuring range for spot metering allows focusing on tiny details of the subject.

The slightly larger measuring range in field metering is less critical for focusing, but still permits selective metering.

Select Focusing in the main menu Select AF Mode Select the desired setting
(Multi-Field, Spot, Field, Face Detection)
Note · AF focusing can be unsuccessful:
­ If the distance to the object is too great (macro mode) or too small
­ If the object is not sufficiently illuminated

These metering methods can also be used for serial exposures in which the part of the object you want to focus on will always be at the same off-center position in the image. Simply move the AF metering field to another position.
Press the directional pad left or right as needed or
Briefly tap the LCD panel (while Touch AF is activated)
Note · In both cases, the metering fields remain at their last positions
set, even if the metering method is changed or the camera is switched off.70

Picture Mode

FACE DETECTION

TOUCH AF

EN

In this metering method, the Leica Q2 Monochrom automatically detects faces in the image field. The focus is set automatically on the faces closest to the camera. Multi-field metering is used if no faces are detected.

Touch AF allows a direct placement of the AF metering field. Select Focusing in the main menu Select Touch AF Select Touch AF

Positioning the AF Metering Field Briefly tap the LCD panel in the desired position

To move the metering field back to the center of the screen Double tap the LCD panel Note · This function is available in conjunction with the AF metering
methods Spot metering and Field metering.

MF ASSIST FUNCTIONS

The combination Touch AF + Release allows a direct placement of the

Picture Mode

AF metering field for immediate recording.

ENLARGEMENT IN AF MODE

Select Focusing in the main menu Select Touch AF

You can access the enlargement function independent of focusing for a better assessment of the settings.

Select Touch AF + Release

The Magnification function must be assigned to the FN button or

Briefly tap the LCD panel in the desired position

thumbwheel button to use this feature (see p. 51).

TOUCH AF IN EVF MODE Touch AF is deactivated by default when EVF is in use to prevent any inadvertent altering of the AF metering field. Touch AF can, however, also be used in EVF mode. Factory setting: Off
Select Focusing in the main menu Select Touch AF in EVF Select On/Off

Accessing the enlargement function
Press the FN button / thumbwheel button · An enlarged image section appears. The position of the enlargement depends on the position of the AF metering field. · The rectangle within the frame at the top right represents the current magnification, as well as its position in the displayed cropped section.
Adjusting the enlargement function

Note · In this case, you can change the position of the AF metering field
by swiping.

Press the center button · The image section toggles between magnification factors (3x/6x).

Changing the position of the enlarged section

Press the directional pad left or right as needed

Exiting the enlargement function

Tap the shutter button

Notes · The enlargement function remains active until it is exited.
· The most recently used function and zoom factor will still be set the next time the function is accessed.

72

AF ASSIST LIGHT

AF QUICK SETTING

EN

Picture Mode

The integrated AF assist light allows operation of the AF system in unfavorable lighting conditions. This light comes on as soon as the shutter button is pressed, provided the function is activated.

The AF quick setting allows quick changes to the metering field size during field metering. The viewfinder image remains visible continuously during setting adjustments.

Select Focusing in the main menu Select AF Assist Lamp Select On/Off
Notes · The AF assist light illuminates an area of up to approx. 5 m. · The AF assist light switches off automatically, once focusing was
successful (AF metering field is green) or has failed (AF metering field is red).

ACCESSING AF QUICK SETTING
Touch and hold the LCD panel · All auxiliary displays are hidden. · Red triangles appear at two corners of the metering field if the metering method Field is set.

ACOUSTIC AF CONFIRMATION
You can set an acoustic confirmation signal for successful focus metering in AF mode (see p. 59).

ADJUSTING THE METERING FIELD SIZE (only Field)
Turn the thumbwheel or
Two-finger pinch/spread · The size of the AF-metering field is adjustable in 3 increments.

73

EN MANUAL FOCUSING (MF)

MF ASSIST FUNCTIONS

Picture Mode

Focusing manually may in some situations be a better choice than autofocus. ­ the same setting is used for several exposures ­ it would take longer to use the metering memory lock function ­ the setting is to be kept at infinity for landscape pictures ­ poor, i.e. very dark lighting conditions prevent AF operation or
would slow it down

The following assist functions are available in MF mode.
FOCUS PEAKING This assist function highlights the edges of in focus subject elements in color. The color can be user-specified.

Move the focus ring out of the AF position (press and hold the AF/MF lock release)

Turn the focus ring until the desired part of the object is in clear focus

Select Focusing in the main menu Select Focus Assist Select Focus Peaking Select the desired setting
(Off, Red, Green, Blue, White) Select an image section Turn the focus ring to mark the desired subject elements
Note · Focus peaking is based on subject contrast, i.e. differences
between light and dark. As a result, high contrast subject parts could be marked, even if they are not completely in focus.

74

Picture Mode

ENLARGEMENT IN MF MODE

Notes

EN

The larger the details of the subject are shown, the better you can assess their sharpness and the more accurately you can focus.
Turning the focus ring will automatically enlarge the image section in the center, which means the focus quality can be better

· The enlargement will automatically return to normal viewing size about 5 s after the last turn of the focus ring.
· The most recently used function and zoom factor will still be set the next time the function is accessed.

assessed.

Select Focusing in the main menu

Select Focus Assist

Select Auto Magnification

Select On

Turn the focus ring
· An enlarged image section appears. The position of the enlargement depends on the position of the AF metering field.
· The rectangle within the frame at the top right represents the current magnification, as well as its position in the displayed cropped section.

Tap the shutter button · The image is no longer enlarged.

Adjusting the enlargement function

Press the center button · The image section toggles between magnification factors (3x/6x).

Changing the position of the enlarged section

Press the directional pad left or right as needed

75

EN MACRO FUNCTION

ISO SENSITIVITY

Picture Mode

The working range for the focus setting can be switched quickly and easily from the standard focus range (30 cm to infinity) to the macro range (17 cm to 30 cm) using the macro setting ring. AF and MF mode are available in both ranges.

The ISO setting covers a range between ISO 100 and ISO 100 000, allowing you to adapt to the relevant situation as required.
There is more leeway for the use of preferred shutter speed and aperture combinations when setting the exposure manually. You can set priorities within the scope of the automatic setting, e.g. for reasons of picture composition.
Factory setting: Auto ISO

Turn the macro setting ring until the alignment point is set to
MACRO
· The distance scales on the focus ring change when the focus ranges change.

FIXED ISO VALUES
Values between ISO 100 and ISO 100 000 can be selected in 11 increments.
Select ISO in the main menu Select the desired value
Note · When high ISO values are used or the image is edited later,
image noise, as well as vertical and horizontal stripes may become visible, particularly in larger, evenly lit areas of the object.

76

Picture Mode

AUTOMATIC SETTING

LIMITING ISO VALUES

EN

The camera automatically adjusts the sensitivity to ambient brightness and/or to the configured shutter speed/aperture

All values from ISO 400 are available. Factory setting: 6400

settings combination. In conjunction with aperture priority mode,

Select Auto ISO Settings in the main menu

this function extends the range for automatic exposure control.

Select Maximum ISO

Select ISO in the main menu

Select the desired value

Select Auto ISO
LIMITING SETTING RANGES
A max. ISO value can be set, which will then limit the automatic setting range (Maximum ISO). A max. exposure time can also optionally be configured. There are focal length related settings (1/f, 1/(2f), 1/(3f), 1/(4f)) and fixed max. shutter speeds 1/2 s and 1/2000 s available for that purpose.

LIMITING SHUTTER SPEED RANGES Factory setting: 1/(2f)
Select Auto ISO Settings in the main menu Select Min. Shutter Speed Select the desired value
(1/f, 1/(2f), 1/(3f), 1/(4f), 1/2000, 1/1000, 1/500, 1/250, 1/125, 1/60, 1/30, 1/15, 1/8, 1/4, 1/2)

In the focal length-specific settings, the camera will only switch to a higher sensitivity if the shutter speed would fall below the set threshold due to low light.
Separate settings are available for flash photography.

LIMITING ISO VALUES (FLASH) All values from ISO 400 are available. Factory setting: 6400
Select Auto ISO Settings in the main menu Select Maximum ISO with Flash Select the desired value

LIMITING SHUTTER SPEED RANGES (FLASH) Factory setting: 1/(2f)
Select Auto ISO Settings in the main menu Select Shutter Speed Limit with Flash Select the desired value
(1/f, 1/(2f), 1/(3f), 1/(4f), 1/2000, 1/1000, 1/500, 1/250, 1/125, 1/60, 1/30, 1/15, 1/8, 1/4, 1/2)

77

Picture Mode

EN EXPOSURE
EXPOSURE METERING METHODS Optional methods are Spot metering, Center-Weighted and Multi-Field metering.

Select Exposure Metering in the main menu
Select a metering method (Spot, Center-Weighted, Multi-Field) · The selected metering method is displayed in the header line of the screen image.

SPOT METERING ­
This metering method is concentrated exclusively on a small area in the center of the image. The metering fields are joined together when the exposure metering method Spot is combined with the AF metering methods Spot and Field. Exposure metering will then occur at the point specified by the AF metering field, even if it is moved.

Spot metering allows a shifting of the metering field:
Press the directional pad left or right as needed
Note · The exposure information (ISO value, aperture, shutter speed
and light balance with exposure compensation scale) will help to determine the settings required for correct exposure.

CENTER-WEIGHTED METERING ­
This method considers the entire image field. The subject elements captured in the center will, however, impact on the calculation of the exposure value more so than areas around the edges.

MULTI-FIELD METERING ­
This metering method is based on the detection of multiple values. These values are used in an algorithm to calculate an exposure value appropriate for a good rendering of the assumed main subject.

78

EXPOSURE MODES

FULLY AUTOMATIC EXPOSURE SETTING ­ P

EN

Picture Mode

There are four exposure modes available to adjust the rendering of the object or to create the desired picture composition: ­ Automatic program (P) ­ Aperture priority mode (A) ­ Shutter speed priority mode (S) ­ Manual setting (M)

SELECTING A MODE
The four operating modes are activated automatically via the following setting combinations:

Setting via the shutter speed setting dial

Setting via the aperture setting ring

P A A A S manual setting

A manual setting A

AUTOMATIC PROGRAM ­ P
The automatic program mode facilitates fast and fully automatic photography. The exposure is controlled by an automatic shutter speed and aperture setting.
Turn the shutter speed setting dial to the A position Turn the aperture setting ring to the A position Tap and hold the shutter button
· Exposure information is displayed at the bottom of the screen. This contains the automatically set value pair of aperture setting and shutter speed.
· All other visible displays of the info bars will be hidden.
Shutter release or
Adjusting the automatically set value pair (Program shift)

M manual setting

manual setting

Set the shutter speed setting dial to the relevant position Set the aperture setting ring to the relevant position

79

EN

CHANGING THE PRESET SHUTTER SPEED AND APERTURE

COMBINATIONS (SHIFT)

SEMI-AUTOMATIC EXPOSURE SETTING ­ A/S

Picture Mode

Changing the preset values using the Shift function combines the reliability and speed of fully automatic exposure control with the opportunity to vary the speed/aperture combination selected by the camera at any time to fit in with your own ideas and intentions. The overall exposure, i.e. the brightness of the image, remains unchanged. Faster shutter speeds are a good choice for e.g. sports pictures, while longer speeds will offer more depth of field for e.g. landscape pictures.
Turn the thumbwheel to the left/right (left = greater depth of field, right = shorter shutter speeds) · Shifted value pairs are marked with an asterisk next to the P.

APERTURE PRIORITY – A
Aperture priority mode sets the exposure automatically according to the manually selected aperture. This mode is suitable for pictures in which the depth of field is a critical compositional element.
By selecting an appropriately low exposure value, you can reduce the depth of field range, for example to make a face “stand out” in sharp focus against an unimportant or distracting background. Conversely, you can use a higher exposure value to increase the depth of field range, so that everything from the foreground to the background will be in full focus in a landscape shot.

Notes · The adjustment range is limited to guarantee correct exposure.
· The values will be reset after each shot (and also if exposure metering is set to deactivate automatically after 12 s) to prevent unwanted use.

Turn the shutter speed setting dial to the A position Set the exposure value setting via the aperture setting ring
Tap and hold the shutter button · Exposure information is displayed at the bottom of the screen. This contains the automatically set value pair of aperture setting and shutter speed. · All other visible displays of the info bars will be hidden.

Shutter release

80

Notes

SHUTTER SPEED PRIORITY ­ S

EN

Picture Mode

· The remaining exposure time after shutter release is counted down in seconds on the display for shutter speeds greater than 2 s.
· Image noise becomes apparent when using higher sensitivities, particularly on uniform dark areas. Long exposure times may cause severe image noise. In order to reduce this annoying phenomenon, the camera will take a second “black picture” (taken with the shutter closed) automatically after pictures taken with slow shutter speeds and high ISO values. The noise metered in this parallel picture is then digitally “subtracted” from the data for the actual picture. In such cases the message

Shutter speed priority mode will set exposure automatically according to the manually selected shutter speed. It is therefore particularly suitable for pictures of moving objects, where the sharpness of the movement depicted is a critical picture composition element.
An appropriately fast shutter speed can help to avoid e.g. unwanted motion blurring and will “freeze” the object. Conversely, an appropriately longer shutter speed can help create a better feeling of motion in the image with targeted “tracer effects”.
Turn the aperture setting ring to the A position

Noise reduction in progress will appear with a relevant time value.

Select the desired shutter speed

The doubling of the “exposure” time must be taken into account for long-term exposure times. The camera must not be switched off during that time.

­ via the shutter speed setting dial: in full increments ­ using the thumbwheel: fine tuning in 1/3 increments Tap and hold the shutter button

· Exposure information is displayed at the bottom of the screen.

This contains the automatically set value pair of aperture

setting and shutter speed.

· All other visible displays of the info bars will be hidden.

Shutter release

Note · Fine tuning can alternatively be done via the status screen. This
will be the only option if Exp. Comp. (see p. 52) is assigned to the thumbwheel.

81

EN MANUAL EXPOSURE SETTING ­ M

SETTING SHUTTER SPEEDS

Picture Mode

The following manual settings for shutter speed and aperture are a good choice: ­ to create a special image mood that can only be achieved with a
very specific type of exposure ­ to ensure a perfectly identical exposure for multiple images with
different cropped sections
Set the desired exposure manually (using the shutter speed setting dial and the aperture setting wheel on the lens). · The exposure compensation is done using the scale of the light balance:
Correct exposure
under/overexposure by the displayed value
under or overexposure by more than 3 EV (Exposure Value)

The shutter speed is set in two steps. 1. via the shutter speed setting dial: in full increments 2. using the thumbwheel: fine tuning in 1/3 increments

Shutter speed setting dial all settings from 2 to
1000
Set to 1+
Set to 2000

Thumbwheel
Fine tuning the shutter speed in 1/3 EV increments, max. ±2/3 EV
Longer shutter speeds than 1 s (0.6 s to 120 s in 1/3 EV increments) Shorter shutter speeds than 1/1000 s (1/1250 s to 1/40000 s in 1/3 EV increments)

Tap the shutter button · Exposure information is displayed at the bottom of the screen. · All other visible displays of the info bars will be hidden.
Shutter release

EXAMPLES FOR SHUTTER SPEED FINE TUNING SETTINGS ­ set shutter speed 1/125 s + move the thumbwheel one click to
the left = 1/100 s
­ set shutter speed 1/500 s + move the thumbwheel two clicks to the right = 1/800 s

Notes · The screen image will show an exposure preview if P-A-S-M is
selected under the menu item Exposure Preview.
· The shutter speed setting dial must be clicked to one of the engraved exposure shutter speeds.

Note · Fine tuning can alternatively be done via the status screen. This
will be the only option if Exp. Comp. (see p. 52) is assigned to the thumbwheel.

82

LONG-TERM EXPOSURE ­ T

Notes

EN

Picture Mode

In this setting, the shutter remains open after shutter release until the shutter button is pressed again (ax. 2 min depending on ISO setting).

· The thumbwheel must have the assignment Off or Auto (see p.52).
· Image noise becomes apparent when using higher sensitivities, particularly on uniform dark areas. Long exposure times may

cause severe image noise. In order to reduce this annoying

phenomenon, the camera will take a second “black picture”

(taken with the shutter closed) automatically after pictures taken

with slow shutter speeds and high ISO values. The noise metered

in this parallel picture is then digitally “subtracted” from the data

for the actual picture. In such cases the message

Noise reduction in progress will appear with a relevant time value.

The doubling of the “exposure” time must be taken into account

for long-term exposure times. The camera must not be switched

Set the shutter speed setting dial to 1+

off during that time.

Set the aperture setting ring to a fixed value

Turn the thumbwheel until the time value in the footer line changes to T

Shutter release

83

EN EXPOSURE CONTROL

EXPOSURE LOCK

Picture Mode

EXPOSURE PREVIEW
The brightness of the screen image mirrors the effects of the selected exposure settings when pressing and holding the shutter button on the first pressure point. You can now assess and control the effect of the relevant exposure setting on the image before taking the picture. This will apply as long as the subject brightness and the set exposure don’t result in excessively low or high brightness values. This function can be disabled for the manual exposure setting (M). Factory setting: P-A-S-M
Select Exposure Preview in the main menu
Select P-A-S (only in automatic, aperture priority and shutter speed priority mode) or P-A-S-M (also for manual setting)

We often want to arrange important subject elements outside the center of the picture for reasons of picture composition and these elements may sometimes be very bright or very dark. Center-weighted metering and spot metering, however, mainly capture an area in the center of the image and are calibrated to an average gray scale value.
In that case the metering memory lock initially allows a metering of the main object and to store the relevant settings until the final image section is set. The same applies for focusing (AF-L) in any autofocus mode.
Usually both lock functions (focusing and exposure) are done at the same time with the shutter button. You can, however, divide the lock functions between the shutter button and the Zoom/Lock button or assign both to the Zoom/Lock button. The functions include settings and storage.

Notes · Depending on ambient lighting conditions, the brightness of the
screen image may differ from that of the actual pictures, despite the settings described above. The screen image will appear considerably darker than the ­ correctly exposed ­ picture. That is particularly the case in long-term exposures.
· The exposure preview will also be displayed if exposure metering is done via another control element (e.g. using the Zoom/Lock button, provided is was assigned the AE-L function).

84

AE-L (AUTO EXPOSURE LOCK)

Notes

EN

The camera stores the exposure value. The focus can therefore be · A metering memory lock doesn’t make much sense in conjunc-

Picture Mode

set on another object, no matter which exposure value is selected.
AF-L (AUTO FOCUS LOCK) The camera stores the focus setting. That makes it easier to change the image section when focusing is fixed.

tion with multi-field metering, because a targeted capture of an individual object element will not be possible.
· A change in the aperture setting after the metering memory lock is set will not result in an adjustment of the shutter speed, i.e. the end result would be an incorrect exposure.

AE-L/AF-L With this option enabled, the camera stores the exposure value and the focus setting when the assigned button is pressed and held.

· Only one of the two exposure locks (AF-L or AE-L), or both at the same time (with AF-L + AE-L) can be set for a recording.
· The assigned button must be pressed again to remove the memory lock and to take a new measurement.

85

EN

METERING MEMORY LOCK IN AF MODE

Via the Zoom/Lock button

Picture Mode

The metering functions are distributed as follows while the Zoom/ Lock button is pressed and held:

Menu settings

Shutter button

Zoom/Lock button

Select Customize Control in the main menu Select Zoom/Lock-Button Select the desired setting
(AF-L + AE-L, AE-L, AF-L) Aim at the object

AF-L + AE-L AF-L AE-L

No function Exposure Sharpness

Exposure and focus Sharpness Exposure

The shutter button will retain both functions, provided no exposure lock is done via the Zoom/Lock button.

Via the shutter button Aim at the key part of the object or at a similar detail Tap and hold the shutter button
· The measurement is taken and saved.

Press and hold the Zoom/Lock button · The measurement is taken and saved. · A small padlock icon with the letters AE appear at the bottom left of the screen to signify that the exposure value was saved. · A green AF metering field signifies that the focusing was saved. · The exposure value/focusing remain until the same button is pressed again.
Select the final image section Shutter release

Pan the camera to capture the final image section while keeping the shutter button pressed
Shutter release

METERING MEMORY LOCK IN MF MODE In MF mode, only the exposure can be locked via the shutter button. Similarly, the Zoom/Lock button will only have that one function (with an assignment of AF-L + AE-L or AE-L).

86

EXPOSURE COMPENSATION

Using thumbwheel control

EN

Picture Mode

Exposure meters are calibrated for a medium gray scale value, which matches a standard, i.e. average image object. Should the measured image detail not fulfill that requirement, then the a relevant exposure compensation can be effected.
Specifically where several pictures are taken in sequence, for example if for a series a slightly lesser or greater exposure is desired for a particular reason, then exposure compensation can be a very useful function: Once set, the setting remains active ­ unlike the metering memory lock ­ until it is reset.
Exposure compensation values can be set in the range ±3 EV in 1/3 EV increments (EV: Exposure Value).

Select Customize Control in the main menu Select Wheel Assignment Select Exp. Comp. Set the desired value using the thumbwheel
Using menu control Select Exposure Compensation in the main menu
· A scale appears as a submenu item. Set the value on the scale
· The set value is displayed above the scale.

A A Set compensation value (marks at 0 = Off)

Notes · While setting the value, you can see the effect on the screen
image, which becomes darker or lighter.
· This function can be selected for direct access via the thumbwheel (see p. 52). That will allow the user to set the values quickly using the thumbwheel.
· The following applies for set compensation values, no matter how they were initially set: They remain effective until they are manually reset to 0, i.e. even if the camera is switched off and on again in the meantime.
· The set exposure compensation is indicated by a mark on the exposure compensation scale in the footer line.

87

EN PICTURE RECORDING MODES

· Serial exposures with Continuous – High Speed set are taken at a frequency of max. 10 fps, provided shutter speeds of 1/60 s or

Picture Mode

SERIAL EXPOSURES
The camera is set to single shot exposures by default (Single). Serial exposures can also be created to e.g. capture motion sequences at various stages.

faster are used. · Serial exposures are not possible if a flash is used. Only a single
picture will be taken if the flash function is activated. · Serial exposures are not available in combination with the
self-timer function.

· The buffer memory of the camera only allows a limited number

of exposures in series and in the selected exposure frequency.

The exposure frequency is reduced, once the capacity limit of the camera is reached. This slow-down is due to the time

required to transfer the data from the buffer memory to the

card.

· Continuous – Low Speed/Continuous – Medium Speed:

For the modes AFs, AFc and MF, the exposure settings are done

individually for every recording. Focusing is done additionally in

Select Drive Mode in the main menu
Select the desired setting (Continuous – Low Speed, Continuous – Medium Speed, Continuous – High Speed, Continuous – Very High Speed)

the modes AFs and AFc. · Continuous – High Speed/Continuous -Very High Speed:
In the modes AFs, AFc and MF the exposure and focus settings specified for the first recording will be applied to all subsequent recordings.

Once you have finalized your settings, the camera will take serial exposures as long as you keep the shutter button pressed down fully (and you have sufficient space on your memory card).

Notes

· We recommend deactivating the preview playback mode

(Preview) when using this function.

· The specified picture sequence stated in the technical

information refers to a default setting (ISO 200, JPG format L-JPG).

· Regardless of how many pictures were taken in a series, the last

picture in the series or the last picture saved on the memory

card while the save process is ongoing will be displayed first in

88

both review modes.

INTERVAL SHOOTING

To get started

EN

Picture Mode

This camera allows you to capture motion sequences over extended periods of time automatically using the interval shooting function. You specify the number of pictures, the intervals between pictures, and the start time of the series.
The exposure and focus settings are no different from those for normal pictures, but you should remember that the lighting conditions may change during the course of the picture series.

Press the shutter button · The remaining time until the next exposure and its number is displayed at the top right. · The LCD panel will switch off automatically between recordings. Tapping the shutter button reactivates the LCD panel.
To cancel a running serial exposure

SPECIFYING THE NUMBER OF PICTURES
Select Drive Mode in the main menu Select Interval Shooting Select Number of Frames Enter the desired value

Press the PLAY button · A small menu appears.
Select End

SPECIFYING THE INTERVALS BETWEEN SHOTS
Select Drive Mode in the main menu Select Interval Shooting Select Interval Enter the desired value

SETTING THE DELAY TIME
Select Drive Mode in the main menu Select Interval Shooting Select Countdown Enter the desired value

89

EN

Notes

· The use of autofocus in interval shooting may result in not all

· The camera may under some circumstances be unable to take good pictures. That may happen if, for example, focusing was

exposures having their focus on the same object.

unsuccessful. In that case, the camera will not take a picture

Picture Mode

· The camera may switch off and on again if “Auto power off” is set and no other camera operation occurs between the

and the series will continue with the next interval. The message Some Frames are dropped appears on screen.

individual shots.

· Interval shooting over an extended period of time in a cold

location or in a place with high temperature and humidity may

result in malfunctions.

· Interval shooting will be interrupted or canceled in the following

situations:

­ if the battery is depleted

­ if the camera is switched off

Make sure to check the battery for sufficient charge.

· Interrupted or canceled interval shooting can be resumed by

switching the camera off, replacing the battery or memory card

as needed and then switching the camera back on. A prompt will be displayed on screen if the camera is switched off and on

again while the Interval Shooting shooting function is active.

· The interval function remains active after a picture series is

completed, and also after the camera is switched off and on

again, until another exposure mode (picture series) is set.

· Availability of the interval function does not mean that the

camera is suitable for use as a monitoring device.

· Regardless of how many pictures were taken in a series, the last

picture in the series or the last picture in the series or the last

picture saved on the memory card while the saving process is

ongoing will be displayed first in both review modes.

· The pictures of an interval shoot are marked with in review

mode.

90

EXPOSURE BRACKETING

You can select the desired number of exposures (3 or 5). The

EN

Many attractive objects are rich in contrast, which means they have very bright and very dark areas. The image effect can be

exposure difference, which can be set via EV Steps, can be up to 3 EV.

Picture Mode

dramatically different, depending on which of these areas you

Select Drive Mode in the main menu

choose to align your exposure with. The automatic bracketing

Select Exposure Bracketing

function in aperture priority mode allows you to produce several alternatives with graduated exposure values and varying shutter speeds. You can then select the picture you like best or use relevant picture editing software to calculate an image with a particularly broad contrast spectrum (HDR).

Select the desired number of pictures under Number of Frames in the submenu
Select the desired exposure offset under EV Steps in the submenu
Select the desired Exposure Compensation value in the submenu

A B C
D

· The marked exposure values change positions according to the settings selected. In the case of exposure compensation, the scale also shifts.
· The selected exposure compensation value will be applied to the entire exposure series.
Select the desired setting under Automatic submenu

E A Number of pictures

· With the factory setting in place (On), the entire exposure series will run after the shutter button is pressed once; when the setting is Off, each picture must be taken individually.

B Exposure difference between the pictures C Exposure compensation

All pictures are taken by pressing the shutter button once or several times

D Light value scale

E Exposure values of the images marked in red (The scale will be offset by the relevant value if exposure compensation is set concurrently.)

91

EN

Notes

· Appears on the LCD panel if the bracketing function is

activated. You can watch the effect of the function on screen

while the pictures are taken (brighter or darker).

SELF-TIMER
The self-timer function allows taking pictures with a preset time delay. We recommend that the camera is placed on a tripod.

Picture Mode

· Depending on the exposure mode, the exposure gradations are

produced by changing the shutter speed and/or aperture value:

­ Shutter speed (A/M)

­ Aperture (S)

­ Shutter speed and aperture value (P)

· The picture sequence: underexposure/correct exposure/

overexposure.

· The working range for automatic bracketing may be limited

depending on the available shutter speed/aperture combination.

· With automatic ISO sensitivity control enabled, the sensitivity

Select Self Timer in the main menu

calculated by the camera automatically for the raw picture will also be applied to all other pictures in a series, i.e. the ISO value will not change during bracketing. This may mean that the slowest shutter speed specified under Min. Shutter Speed is exceeded.
· The focus range for automatic bracketing may be limited (depending on the originally set shutter speed). The specified numbers of pictures will be taken regardless. Several pictures in a series may consequently be taken with the same exposure

Select Self Timer 2 s/Self Timer 12 s
Shutter release · The remaining time until exposure is counted down on screen. The self-timer LED at the front of the camera counts down the delay time. It flashes slowly during the first 10 s, then fast for the last 2 s. · The self- timer delay time can be canceled at any time by taping the shutter button; the relevant settings remain intact.

values.

Notes

· The function remains active until another function is selected in · Exposure metering is done first; in autofocus mode, focusing is

the Drive Mode submenu. If no other function is selected, another

first. Only then will the delay time commence.

series of pictures is taken each time the shutter button is pressed.

· The function remains active until another function is selected in the Self Timer submenu.

· The self-timer function is only available for individual recordings.

92

DIGITAL ZOOM

DIRECT ZOOM CHANGE

EN

Picture Mode

Three cropped section sizes are available in addition to the Summilux 28 f/1.7 ASPH. image section. They are similar to the focal lengths 35 mm, 50 mm and 75 mm.

35 mm

50 mm

Press and hold the Zoom/Lock button · A frame appears around the image section on screen, indicating the final image size. · Pressing the Zoom/Lock button will toggle the display between 28 mm (full screen), 35 mm, 50 mm and 75 mm. · The selected increment will remain set until the next change.

75 mm

Notes · The relevant setting must be selected via the menu if the Zoom/
Lock button has a different function assigned (direct access, see p. 52).
· The desired cropped section is displayed for DNG recordings, but the entire 28 mm image field will be saved. That will allow a later editing of the full image.
· Only an enlarged cropped section will be displayed and stored for JPG images. A higher zoom value means a lower resolution as shown in the following table. Cropped sections can also be created using editing software.

PERMANENT SETTING Select Digital Zoom in the main menu Select the desired setting

L-JPG M-JPG S-JPG

28 mm
47 MP 24 MP 12 MP

Digital Zoom 35 mm 30 MP 15 MP 8 MP

Digital Zoom 50 mm 15 MP 8 MP 4 MP

Digital Zoom 75 mm 7 MP 3 MP 2 MP

93

INFO DISPLAYS

Showing/hiding information temporarily

Picture Mode

INFO DISPLAYS IN PICTURE MODE
Various information is displayed in the header and/or footer line. The exposure information (ISO value, aperture, shutter speed and light balance with exposure compensation scale) will help to determine the settings required for correct exposure. Select one of the three available display options.

Tap and hold the shutter button · (Only) the exposure information and currently active auxiliary functions will be visible.
Note · All displays are visible at all times in video mode.

Press the center button · The display cycles through the display options. ­ No picture data

­ Footer with exposure information, auxiliary displays
­ Header with recording information, footer with exposure information, auxiliary displays
94

AUXILIARY DISPLAYS

CLIPPING

EN

You can select a number of other displays in addition to the standard information contained in the header and footer to adapt the screen image to your needs. Four functions are available.

The Clipping display marks very bright image areas. This function is a very easy and exact tool for checking the correct exposure setting.

Picture Mode

D A C

999-9000

A Histogram B Grid lines (Grid) C Level display (Horizon) D Clipping
Note · Histogram, clipping display and level gauge will only be visible
when the relevant information display is visible. The grid will appear independently of the info display.

Select Capture Assistants in the main menu Select Clipping Select On/Off
Tap and hold the shutter button · The clipping display appears.

95

EN

LEVEL GAUGE

Two long lines to the left and right of the image center indicate the

The integrated sensors of the camera show its orientation. These indicators ensure exact camera orientation along the longitudinal

transverse axis on screen. ­ in zero position = green

and transverse axes of critical objects, e.g. architecture.

­ in tilted position = red

Picture Mode

Select Capture Assistants in the main menu Select Horizon Select On/Off

The longitudinal axis is indicated in level position by two green double-lines immediately left and right of the image center. When the camera is tilted, these lines are white, and a short red line appears above or below them.

Note · The camera will switch the aspect of the level gauge autono-
mously for pictures taken in portrait format.
96

Picture Mode

GRID

HISTOGRAM

EN

The grids divide the image frame into multiple fields. They facilitate picture composition and an exact camera orientation.

Histogram represents the brightness distribution in the picture. The horizontal axis shows the graduated values from black (left) through gray to white (right). The vertical axis corresponds to the number of pixels at each brightness level.
This type of rendering allows an additional quick and easy assessment of the exposure setting.

Select Capture Assistants in the main menu Select Grid Select On/Off

Select Capture Assistants in the main menu Select Histogram Select On/Off
Notes · The histogram is always based on the brightness displayed;
depending on the settings used, it may not represent the final exposure. · In picture mode, the histogram should be regarded as a “trend indicator”. · The histogram during rendering may differ slightly from the one during exposure. · Histogram is available only in full screen mode.
97

EN FLASH PHOTOGRAPHY

ATTACHING THE FLASH UNIT

Picture Mode

The camera determines the necessary flash intensity by firing one or more pre- flashes before taking the actual picture. The main flash fires immediately after, i.e. during exposure. All factors influencing exposure (e.g. filters, aperture settings, distance to the main subject, reflective ceilings, etc.) are automatically considered.

COMPATIBLE FLASH UNITS
The entire scope of functions described in this instruction manual, incl. TTL flash metering, is available only for Leica system flash units like the SF 40. Other flash units, which only have a positive middle contact, can be safely fired via the Leica Q2 Monochrom, but cannot be controlled via the camera. Correct function cannot be guaranteed when using any other flash unit.

Switch off the camera and flash unit Pull off the accessory shoe cover and store it in a safe place Slide the foot of the flash unit all the way into the accessory
shoe and use the clamping nut (where available) to secure it against accidental movement · Movement inside the accessory shoe can interrupt required
contacts and therefore cause malfunctions.

DETACHING THE FLASH UNIT
Switch off the camera and flash unit Detaching the flash unit Replace the accessory shoe cover

Important · The use of incompatible flash units with your Leica Q2
Monochrom may result in irreparable damage to the camera and/or the flash unit.

Note · The accessory shoe cover should always be attached when no
accessory is used.

98

FLASH EXPOSURE METERING (TTL METERING)

SETTINGS ON THE FLASH UNIT

EN

The camera offers a fully automated, camera-controlled flash mode in conjunction with system-compatible flash units (see p. 98) and for the auto modes aperture priority and manual setting.

Operating mode TTL Automatic control by the camera

Picture Mode

In aperture priority mode and with manual setting, the camera furthermore allows the use of other interesting flash techniques like flash synchronization and firing with slower shutter speeds than the max. sync time. The camera additionally communicates the sensitivity setting to the flash unit. The flash unit can use this information to automatically adjust its range data, provided the device comes with these displays and the aperture setting selected on the lens is also entered manually on the fl

References

• club.leica-camera.com
• Leica Camera Wetzlar Germany – Official | International
• Leica Camera Austria
• Warranty conditions | Leica Camera US
• Leica Camera Wetzlar Germany – Official | International
• Leica Order Guide - Leica Camera AG
• club.leica-camera.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>