SUNCO LIGHTING SL LV-BR LED Outdoor Step Light User Manual
- June 16, 2024
- Sunco Lighting
Table of Contents
SUNCO LIGHTING SL LV-BR LED Outdoor Step Light
Product Information
LED Stairway Light (Bronze)
SKU: SL_SQ_LV-BR-3000K
Support: support@sunco.com
844-334-9938
American Company
Specifications
- Voltage:
- Wattage:
- Wattage Equivalency:
- Beam Angle:
- Weight:
- Housing Material:
- Power Factor:
- Efficacy:
- Dimmable:
- Average Lifetime:
- Lumens:
- Moisture Rating:
- CRI:
- Usage Temperature:
- Frequency:
- IP Rating:
- Warranty:
Product Usage Instructions
Before You Start
Safety Information:
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference that may cause undesired operation. Please review all instructions carefully prior to installation.
WARNING: Cancer & Reproductive Harm
www.P65Warnings.ca.gov
Installation Guide
Step 1:
Begin by carefully removing the faceplate from the fixture.
Step 2:
Align a level on the intended step surface, securely position the faceplate
while adjusting alignment, and mark the exact placement using a pencil or
marker.
Step 3:
Use the provided gasket to accurately mark the holes for surface mounting.
Step 4:
After drilling the designated holes, thread the wire through the gasket for an
airtight installation. Additionally, pass the wire through the designated
hole.
Step 5:
Connect the leads from the fixture to the primary low voltage supply cable
leads using the provided wire nuts.
Step 6:
Secure the fixture in place by screwing the two screws through the holes on
the fixture and into the mounting surface.
Step 7:
Reattach the faceplate, then use the two screws to secure it onto the fixture
by fastening them through the holes on the cap.
Frequently Asked Questions (FAQ)
Q: What is lighting distribution angle?
Lighting distribution angle refers to how light spread from light source and
plays a crucial role in choosing the right fixture or bulb. Symmetric lighting
distribution emits light uniformly in all directions, forming a cone-shaped
pattern that offers widespread illumination.
Q: What is asymmetric lighting distribution?
Asymmetric lighting distribution, also known as beam angle, focuses light in a
specific direction. Keep in mind that factors like reflector design, lens
type, and distance between the light source and the illuminated surface can
influence the lighting distribution angle.
Q: What is the warranty policy?
This product is covered by our industry-leading 7-year warranty. Scan the QR
code for 2 extra years of protection!
Q: What is the return policy?
If you are not completely satisfied with your purchase, we accept returns
within 30 days of your purchase date.
Q: How can I contact customer service?
Our Los Angeles team of lighting experts is here to assist you with all your
needs!
- Email: support@sunco.com
- Text or Call: 844-334-9938
Lighting made better.
support@sunco.com |
844-334-9938
REV1.0
American Company
Safety Information
To reduce the risk of fire, electric shock, or physical injury:
- Turn off circuit breaker before installing this fixture.
- Suitable for wet locations at temperature ranging from 4°F to 113°F.
- This product is not compatible with 3rd party sensors.
- This product is not compatible with dimmers.
- This product is not compatible with photo controls.
- This product is not compatible with occupancy sensors.
- Performance may vary with timing devices.
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1.) This device may not cause harmful interference.
- All electrical connections must be in accordance with local and National Electric Code (N.E.C.) standards.
- Please review installation manual carefully before proceeding. Consult a qualified electrician if you are unfamiliar with proper electrical wiring connections.
WARNING:
Cancer & Reproductive Harm-
www.P65Warnings.ca.gov
This device must accept any interference that may cause undesired operation.
Please review all instructions carefully prior to installation.
Installation Guide
-
a. Begin by carefully removing the faceplate from the fixture. .
-
b. Align a level on the intended step surface, securely position the faceplate while adjusting alignment, and mark the exact placement using a pencil or marker.
-
a. Use the provided gasket to accurately mark the holes for surface mounting.
-
b. After drilling the designated holes, thread the wire through the gasket for an airtight installation. Additionally, pass the wire through the designated hole.
-
c. Connect the leads from the fixture to the primary low voltage supply cable leads using the provided wire nuts.
Secure the fixture in place by screwing the two screws through the holes on the fixture and into the mounting surface.
Reattach the faceplate, then use the two screws to secure it onto the fixture by fastening them through the holes on the cap.
Product Details
| Voltage | 12-24V | Average Lifetime | 50,000 hrs |
|---|---|---|---|
| Wattage | 5W | Lumens | 200LM |
| Wattage Equivalency | 50W | Moisture Rating | Wet |
| Beam Angle | 120° | CRI | 80+ |
| Weight | 0.52lbs | Usage | Outdoor |
| Housing Material | ALU+Plastic | Temperature | 4°F-113°F |
| Power Factor | 0.8 | Frequency | 60HZ |
| Efficacy | 40lm/w | IP Rating | IP65 |
| Dimmable | No | Warranty | 7 Years |
Light Distribution Angle
Lighting distribution angle refers to how light spread from light source and
plays crucial role in choosing the right fixture or bulb. Symmetric lighting
distribution emits light uniformly in all directions, forming
a cone-shaped pattern that offers wide-spread illumination.
Asymmetric lighting distribution, also known as beam angle, focuses light in specific direction. Keep in mind that factors like reflector design, lens type, and distance between the light source and the illuminated surface can influence the lighting distribution angle.
Customer Support
Warranty Policy
This product is covered by our industry leading 7 year warranty.
It gets even better – scan the QR code for 2 extra years of protection!
30 Day Return
At Sunco we value our customers and stand by the quality and performance of
our products.
If you are not completely satisfied with your purchase, we accept returns within 30 days of your purchase date.
Customer Service
Our Los Angeles team of lighting experts is here to assist you with all your
needs! Contact us at: Email: Text or Call:
Text or Call:
Customer Service
Our Los Angeles team of lighting experts is here to assist you with all your
needs! Contact us at: Email: Text or Call:
Lighting made better.
support@sunco.com 844-334-9938
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>