Dongguan GY-Z18 Multifunction Wireless Charger User Manual

Dongguan GY-Z18 Multifunction Wireless Charger

Product Information

Specifications

• Model Number: GY-Z18
• Input: 5V/3A,9V/3A
• Phone Output: 15W(Max)/10W/7.5W/5W
• Earbuds Output: 3.0W(Max)
• Product Size: 164126112mm
• Input Port: Type-C
• Watch Output: 2.5W(Max)
• Lamp Output: 2.0W(Max)

Product Usage Instructions

Key Operation

1. Click the M key.
2. The number will start flashing.
3. Click +/- to adjust the characters.
4. To adjust the remaining characters, continue clicking the M key.
5. After adjusting all 4 characters, press the M button again.
6. A sound will indicate that the setting is complete.

To set the alarm:

1. Double-click on the M key.
2. The operation is similar to setting the time.
3. Once the setting is completed, click the M key again.
4. A sound will indicate that the setting is complete.

To delete an alarm clock:

• Long press the M key.

To switch the night light

• Touch the button on the right of the night light.

Compatibility

• This wireless charger is compatible with
• All phones with wireless charging function (must meet the Qi standard)
• Apple Watch
• Apple iWatch S9/Ultra 2/S8/Ultra/S7/ES 2/6/SE/5/4/3/2/Hermes
• Earbuds Compatible with AirPods 2/ AirPods 3/ AirPods Pro/ AirPods Pro 2
• Compatible with Huawei Freebuds2&3
• And more TWS (other Qi-enabled earbuds)

FAQ

Q: What is the input power requirement for this wireless charger?

A: The wireless charger requires an adapter with sufficient power, either 5V/3A or 9V/3A.

Note:
To ensure safe and efficient charging of 3 devices, you must use a 5V/3A or 9V/3A adapter (Qualcomm Quick Charger 2.0 or 3.0) and fast charging cable (if you don’t use a suitable adapter and fast charging cable, the charger may not be able to charge the phone or may not Charging 3 devices at the same time or may even damage the charger).

PRODUCT INTRODUCTION

• The 6-in-1 wireless charger integrates functions such as wireless charging for mobile phones, watches, TWS wireless headphones, clocks, alarms, and night lights.
• Moderate volume, suitable for multiple scenarios, and one product achieves multiple functions. This product is compatible with any mobile phone and earphone that meets Qi standards.
• The wireless charging function of the watch can charge Apple watches with wireless charging function, with low charging heat and stable performance, providing absolute safety assurance.

PRODUCT APPEARANCE

HOW TO USE

LED LIGHT INSTRUCTIONS

KEY OPERATION

• clock calibration: Click the M key, the number flashes, and then click+/- to adjust the characters. Continue to click the M key, the characters flash, and move backward to adjust the remaining characters
• After adjusting 4 characters, press the “M” button again, and a sound will sound to indicate that the setting is complete.
• Alarm settings: Double click on the M key, the operation is similar to setting the time. Once the setting is completed, click the M key again, and a sound will indicate that the setting is complete.
• Delete alarm clock: Long press the M key.
• Night   light switch: Touch the button on the right of the night light.

COMPATIBLE DEVICES

iPhone

• All the phones with wireless charging functions. (must meet the Qi standard)

Apple Watch

• Apple iWatch S9/Ultra 2/S8/Ultra/S7/ES 2/6/SE/5/4/3/2/Hermes.

Earbuds

• Compatible with AirPods 2/ AirPods 3/ AirPods Pro/ AirPods Pro 2.
• Compatible with Huawei Freebuds 2&3.
• And more TWS (others Qi enable earbuds).

PRODUCT SPECIFICATION

• Model Number: GY-Z18
• Input: 5V/3A,9V/3A
• Phone Output: 15W(Max)/10W/7.5W/5W
• Earbuds Output: 3.0W(Max)
• product size: 164126112mm
• Input Port: Type-C
• Watch Output: 2.5W(Max)
• Lamp Output: 2.0W(Max)

PACKING LIST

• Multifunction Wireless Charger X
• User manual X 1

FAQ

1. If you’re experiencing interrupted or slow charging, check the following:

2. The back of your phone should not have any metal, pop sockets, or credit cards.

3. Put the phone in the center of the charging surface (this lets the charging coil in your phone line up with the one inside the wireless charger).

4. Phone cases should be no thicker than 5 mm for effective charging.

5. Check whether the adapter is a QC 3.0 fast charger.

6. If you’re failing to charge your device, please try out the following:

7. Please restart your cell phone and test with another Type-C charging cable.

8. Please check whether the indicator turns on or not.

9. Please check whether the Adapter is a QC3.0 Quick Charger or not.

10. Please check your Phone case thickness<=5mm). Metal ring or Magnetic Pad will not be available.

11. If you’re using the recommended wireless charger with the QC3.0 Adapter and have removed any potential charging obstructions, but are still experiencing issues, try this:

12. Replacing the cable connecting your wireless charger.

13. Rebooting your phone.

14. Unplug the adapter and reinsert it.

15. If the LED light flashes and the wireless charging stand cannot charge your device, how can I deal with this problem?

16. Before using this wireless charger, please make sure that your device supports Qi wireless charging function.

17. Check whether the 3.0 adapter is used for charging.

18. Check whether there are metal foreign matters in the shell of your equipment. Magnetic and metal accessories will flash the LED and prevent charging.

19. Charging slow
    Charging efficiency depends on the receiving power of your devices, and do not keep those apps running during charging.

20. If the phone is charging intermittently, or the indicator light flashes

    • if the charging current is not enough, please use an adapter with sufficient power 5V/3A or 5V/3A.

21. Charging fever

    • It is normal for the receiving coil or transmitter board to generate heat during wireless charging. If the wireless charger is too hot, please take your phone off it, when the wireless charger is cooled down, please charge it again.

22. The charger does not work.

    • Do not put metal debris or magnetic cards in the charging area. If the product does not work due to overheating. please take off the phone and charge it again when it is cooled down.

23. If there are other problems, please contact our after-sales for solution.

TIPS

1. This 6-in-1 wireless charging station only supports the Apple watch.
2. Do not charge the charging station of products from the computer USB interface or other power converters.
3. When charging, place the Qi-enabled device in the center of each wireless charging area.
4. Make sure your device is in the middle of the cordless charger area.
5. The silicone shell of the Watch and Earbuds may cause abnormal charging. It is best to take it off before charging.

WARNING

1. Avoid using the product at places that are wet, humid, or have high temperatures.
2. Avoid dropping the product from high places.
3. Do not disassemble the product by yourselves. Please contact us if necessary.
4. Do not clean the product unless the unit is powered off.
   • All products brands and trademarks are property of their respective owners.

FCC WARNING

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference,
2. this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with a minimum distance between 20cm of the radiator and your body: Use only the supplied antenna.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>