Sony SRSRA3000/B Wi-Fi Enabled 360 Reality Audio Wireless Speaker Instructions Manual
- June 4, 2024
- Sony
Table of Contents
Sony SRSRA3000/B Wi-Fi Enabled 360 Reality Audio Wireless Speaker
Specifications
- BRAND: Sony
- CONNECTIVITY TECHNOLOGY: Wi-Fi
- RECOMMENDED USES FOR PRODUCT: Music
- MOUNTING TYPE: Wall Mount
- SURROUND SOUND CHANNEL CONFIGURATION: 2.0
- PRODUCT DIMENSIONS: 9.1 x 9.1 x 9.1 inches
- ITEM WEIGHT: 1 pounds
Introduction
The Sony SRS-RA3000 Wi-Fi-Enabled 360 Reality Audio Wireless Speaker (Black) and the Knox Gear Multi-Purpose Outlet Wall Shelf with Built-In Cable Management are both available from Amazon.com (White). Sony’s cutting-edge 360 Reality Audio technology is brought into your house via the SRS-RA3000 for an unprecedented level of immersion. You can stream music from your preferred streaming sources with ease by using your smart assistants. Sound is dispersed both horizontally and vertically to create the ideal ambience anywhere in your home, giving the impression that you are on stage or in the recording studio with the artist.
HOW TO CONNECT TO WIFI
Press and hold the device’s WPS button until it beeps (about 2 seconds). On the unit’s back is the WPS button. Press the router’s WPS button*3 within 90 seconds. Press and hold the WPS button for a few seconds depending on the wireless router.
HOW TO PAIR
- Switch on the speaker. The Bluetooth indicator appears when you first turn on the speaker.
- The speaker should be in pairing mode. Press and hold the power or PAIRING button until you hear the voice prompt and see the Bluetooth indicator to start pairing mode.
- Give your source device five minutes to pair.
HOW TO RESET
Depending on your speaker model, either push and hold the (power) button for roughly 10 seconds, or press the RESET button on your speaker with a pin or other pointed instrument.
HOW TO CONNECT TO TV
One end of the HDMI cable (available separately) should be connected to the TV’s HDMI IN port. The sound bar’s TV OUT (ARC) port should be connected to the other end. Next, join an optical audio cable from your TV’s optical digital audio out to your sound bar’s optical in (this is necessary to hear the TV audio).
Frequently Asked Questions
Do submerged waterproof speakers function?
In general, waterproof Bluetooth speakers are not intended to be immersed in water as this could harm the device permanently.
How long does it take a waterproof speaker to charge?
It will take roughly five hours when using the included USB cable and a typical USB port (like one on a laptop). It takes 30 minutes to fully recharge your Ultimate Ears Speaker. With the majority of USB chargers, Wonderboom may also be charged, albeit charging periods will vary depending on the power of the USB charger you use.
Can music be played in the shower?
The most straightforward way to listen to music while in the shower is using a waterproof speaker. Waterproof speakers are useful and take up little room. Additionally, connectivity won’t be a concern for you. As a result, they make taking a shower enjoyable and engaging.
What happens if you submerge a speaker?
Instead of coming from a single focal point, the speaker’s full surface area emits sound. A speaker may cover different amounts of water.
How can you tell if a speaker is water-resistant?
No matter what kind of speaker you choose, it’s critical to understand how it will operate outside in adverse weather conditions. In most cases, the IP rating should provide all the information you require. The majority of portable Bluetooth speakers are submersible in water.
What does a speaker that is waterproof mean?
Waterproof refers to a device’s ability to tolerate water contact without becoming damaged and to not be adversely affected by it.
How long can a Bluetooth speaker be used for?
Of course, a Bluetooth speaker needs a built-in battery to be portable. A portable speaker’s battery life typically lasts between 6 and 12 hours, while some can go up to 24 hours.
Is using a Bluetooth speaker while it’s charging safe?
Yes. Without endangering the battery, you can use your Bluetooth speaker while it is charging. When using the speaker for the first time, you should fully charge it while it is off so that you may check the battery life.
How long should a Bluetooth speaker be charged?
The Bluetooth® speaker’s internal battery needs three (3) hours to fully recharge from a dead battery.
Can I use my phone charger to charge my Bluetooth speaker?
To charge your wireless speaker, use the USB AC adaptor that came with your iPhone® or iPad® mobile device. The characteristics of the AC adapter will determine whether it will take ten hours or longer to fully charge the empty battery.