yozhch Heavy Duty Over Door Coat Hook Hanger User Manual
- June 16, 2024
- yozhch
Table of Contents
Heavy Duty Over Door
Coat Hook Hanger
User Manual
Heavy Duty Over Door Coat Hook Hanger
Tools Included
Tools also needed:
Instructions For Over The Coro Installation
Step 1:
Grab the two extra hangers (B) and put them on the front of the coat rack (A)
Step 2:
Hold the hanger in place and use the medium sized screws (D) to screw in the
door hanger (C) into the coat rack on the backside. The screw is long enough
to secure both. Repeat on the other side. You may also want to use the anti-
slip pads(J) help secure your coat rack and protect your door
Instructions for Wall Mount Installation
Step 1:
Grab the two extra hangers (8) and put them on the front of the coat rack.
Step 2:
Use the smallest sized screws (E) to screw into the coat rack.
Step 3:
Confirm positions on the wall by marking the location with a pencil where the
2 longest screws(F) will go
Step 4:
Use a 5 mm diameter drill bit to drill the 2 holes in the wall in the marked
positions (Step 3)
Step 5:
Hammer the 2 dry wall screw (G) into the pre-drilled holes lightly (Step 4).
Step 6: Apply the 2 washers (H) onto the 2 longest screws (F). Put the rack on the wall and screw in (or drill) too secure.
Step 7:
Put on the screw covers (I)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>