LIAN LI O11 Full Tower Gaming Computer Case Installation Guide
- June 16, 2024
- LIAN LI
Table of Contents
LIAN LI O11 Full Tower Gaming Computer Case
Product Information
Specifications
- Power switch/reset button
- IO ports: USB 3.0 x 2, HD audio & mic, USB 3.1 x 1(Type-c)
- USB 3.0 x 2 ARGB control button (M: Mode, C: Color)
- ARGB LED strip
- Supporting 120 mm fan x 3 or 140 mm fan x 2 or 360 mm radiator x 1
- Removable fan/SSD tray: Supporting 120 mm fan x 3 or 140 mm fan x 2 or 360 mm radiator x 1 or 2.5 SSD x 3
- Additional SSD trays x 3: Supporting 120 mm fan x 3 or 360 mm radiator x 1 or 2.5 SSD x 3
- Removable SSD tray: Supporting 2.5 SSD x 3
- Supporting 120mm fan x 1
- Hot-swappable drive trays: Supporting 3.5 HDD x 4 or 2.5 SSD x 4 or ATX PSU x 2
- PSU tray: Supporting ATX PSU x 1
Product Usage Instructions
Remove top panel
Pull to release the glass. Peel off the protective film on both sides.
PSU installation
To install 2 more PSUs, remove the 2 hot-swappable drive trays.
SSD / 3.5 HDD installation
- Press to release the HDD tray.
- Connecting to PSU.
- Connecting to MB.
SSD installation
Press to release the HDD tray. 2.5 SSD or 3+1 additional SSD trays can be installed on the front right side and/or on the removable fan/SSD tray on the bottom.
Cable management
Use Velcro for cable management.
Remove the magnetic dust filters
Remove the top, side, and bottom filters for cleaning purposes.
Radiator & cooling support
The product supports radiator and cooling systems.
FAQ
- Q : How many hot-swappable drive trays does the product support?
- A : The product supports 4 hot-swappable drive trays for 3.5 HDD or 2.5 SSD, or 2 ATX PSU.
- Q: How many SSD trays can be installed on the product?
- A: The product supports 3 additional SSD trays for 2.5 SSD or 360 mm radiator.
- Q: Can I install a special spec motherboard with an LED module and/or thicker shield?
- A: Yes, you can install a special spec motherboard, but please trim the rubber pads if necessary.
Case components
- A Power switch/reset button
- B 10 ports: USB 3.0 x 2, HD audio & mic, USB 3.1 × 1(Type-с)
- B USB 3.0 × 2
- C ARGB control button (M: Mode, C: Color)
- D ARGB LED strip
- Ê Supporting 120 mm fan x 3 or 140 mm fan x 2 or 360 mm radiator x 1
- F Removable fan/SSD tray: Supporting 120 mm fan x 3 or 140 mm fan x 2 or 360 mm radiator x 1 or 2.5 SSD × 3
- G Additional SSD trays x 3: Supporting 120 mm fan x 3 or 360 mm radiator x 1 or 2.5″ SSD x 3
- H Removable SSD tray: Supporting 2.5* SSD x 3
- I Support 120mm fan x 1
- I Hot swappable drive trays: Supporting 3.5 HDD x 4 or 2.5* SSD x 4 or ATX PSU x 2
- K PSU tray: Supporting ATX PSU x 1
Hardware list
For Graphics Card Anti-Sag Bracket (GB-001) installation
- The exceeded quantity is spare parts.
Remove top panel
Remove side glass & front glass
PSU installation
Cable installation guide
Motherboard installation
- To install a special spec MB (ex. MB including an LED module and/or a thicker shield), please trim the rubber pads
2.5″ SSD / 3.5″ HDD installation
2.5″ SSD installation
2.5″ SSD installation
Cable management
Remove the magnetic dust filters
I/O ports function
LED control board installation
Graphics Card Anti-Sag Bracket (GB-001) installation
Radiator & cooling support
Optional kits
- Model: O11DXL-1 Upright Display Card Kits 200 mm PCI-e Express 16X Riser Card Adapter Extender Cable Kit.
- Model : O11DXL-2 Extension panel For EEB-sized MB installation.
Hardware Clearance
- CPU air cooler
- GPU
- PSU
- Radiator clearance
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>