Wheatronic Crystal Semi Flush Mount Ceiling Light Instructions
- June 16, 2024
- Wheatronic
Table of Contents
Crystal Semi Flush Mount Ceiling Light
Crystal Semi Flush Mount Ceiling Light
Height: | 74″ |
---|---|
Width: | 8.6″ |
Shade: | Crystal |
Wattage: | 1x60W |
Location: | Damp and Dry Location |
Dimmable: | Adapted with dimmable bulbs |
ASSEMBLY INSTRUCTIONS
Crystal Semi Flush Mount Ceiling Light
NOTICE:
– DISCONNECT POWER BEFORE RE-LAMPING OR WIRING THE FIXTURE. READ ALL
INSTRUCTIONS COMPLETELY BEFORE STARTING INSTALLATION.
– TO AVOID THE RISK OF FIRE OR SHOCK, FIXTURE MUST BE INSTALLED JN COMPLIANCE
WITH ALL APPLICABLE NATIONAL AND LOCAL ELECTRICAL/BUILDING CODES. THE
INSTALLATION ANDMAINTENANCE OF THIS UNIT SHOULD BE COMPLETED BY ALICENSED
ELECTRICIAN OR CERTIFIED FACTORY TRAINED TECHNICIAN.
– CALIFORNIA PROP 65: THIS LIGHTING FIXTURE CONTAINS CHEMICALS KNOWN TO THE
STATE OF CALIFORNIA TO CAUSE CANCER, BIRTH DEFECTS, AND/OR OTHER REPRODUCTIVE
HARM.
WASH HANDS AFTER USE.
– UNPACK FIXTURE. PARTS AND PARTS BAG{S) BEFORE DISCARDING THE CARTON. MAKE
CERTAIN THAT ALL PARTS ARE FOUND. INSPECT THE FIXTURE PRIOR TO INSTALLATION
FOR ANY DAMAGE. HVLG DOES NOT PAY OR REIMBURSE ELECTRICIAN FEES. FIXTURE MAY
NOT BE RETURNED ONCE IT HAS BEEN INSTALLED. SEE WARRANTY FOR EXCEPTIONS.
- Wire connection
- Mounting screw
- Lock the fixture
- Screw the light
- Screw the light
- Install the bulb (not included)
Care Instructions : Clean only with a soft dry cloth or feather duster. Do not use abrasive or chemical agents.