KAMMPLUS 1080P HD Police Body Camera User Manual

Body Worn Camera
User Manual

OVERVIEW

BUTTON

button to turn on/off LCD
Audio Recording Button| | Press| Start/Stop audio recording
Video Recording/ Tagging
Button| | Press| Start/Stop video recording
Hold for 3 seconds| Mark an important video
Photo Button| | Press| Take a photo
Hold for 3 seconds| Turn on/off alarm & flashing white LED
IR infrared LED/ White LED Button| | Press| Turn on/off IR infrared LED
Hold for 3 seconds| Turn on/off white LED
Meunu /Confirm Button| | Press| Enter Menu, Confirm Selection
Scroll Up /Left Button| | Press| Scroll up or left
Scroll Down/ Right Button| | Press| Scroll down or right
Exit Button| | Press| Exit to previous interface

SPECIFICATION

Dimension/Weight

Dimension| 79 57 26mm
Weight| 115g
Hardware
Chipset| AC5601
Sensor| GC2053
USB Interface| USB2.0
Status Indication
3 Colors LED Indicator
Voice Indication
Vibration Indication
Duribility
Shock Proof| 1.8m
IP Rating| IP65
Battery
Recording Time| 14 hours video recording at 1080P resolution
Charging Time| 4 hours of charging with power off
Video/Photo/Audio
Coding H.264
Video/Photo/Audio
Viewing Angle| 130 Degrees
Video Resolution| 1080P30 / 720P30 / 480P30
Video Format| MOV
Photo Format| JPG
Audio Format| WAV
Photo| Take photo
USB Command
All camera settings available under mass storage mode
All camera settings available under USB simple mode
Support driver free connection to computer
Others
Infrared Night Vision| 10 Meters night vision (6 pcs IR LED)
Storage| 64GB,128GB
Standard Mount| 360 degrees rotatable crocodile clip
Optional Mount| MOLLE compatible mount
Video Stamp| User ID/Device ID/Date/Time

FUNCTIONALITIES

Power On/Off

1. Power ON : Press and hold to turn on camera from OFF-mode, and enter into Preview Mode.
2. Power OFF : Press and hold to turn off camera. Before shutting down, video being recorded will be saved.
3. Press to turn LCD screen off; Press again to wake up the LCD screen backlight.

Video Recording
In Preview Mode, single-press to start video recording, press the button again to stop recording.

One Key Video Recording:
When camera is off, hold button, camera will turn on and start video recording automatically. Press again to stop video recording. Audio Recording
In Preview Mode, single-press to start audio recording, press again to stop audio recording.

Photo
In preview mode, press to take a photo. Camera will vibrate and save the photo.

Snapshot
To capture picture while video is being recorded, just single- press .

One Key Switch Resolution
In Preview mode, single press to change video resolution directly in preview mode.

Mark Important Video

In preview mode, hold 2 seconds to start video recording with importance tag. There will be an icon show up on the left top corner of LCD screen. Hold 2 seconds again to cancel the importance tag, the icon will disappear.
In video recording mode, hold 2 seconds to enable importance tag, There will be an icon show up on the left top corner of LCD screen. Hold 2 seconds again to cancel the importance tag, the  icon will disappear.

Switch Between Video Recording and Audio Recording

1. When video is being recorded, press to stop recording video and start audio recording, video will be saved.
2. When an audio file is being recorded, press to stop audio recording and start video recording, audio file will be saved.

Playback
In Preview mode. press and “Video”, “Photo”, “Audio”, all files recorded can be browsed.
Camera Settings
In Preview Mode, press button and select “Setup” to go to setting menu interface:

1. Video Resolution
   There are three settings to choose from: 1920x 1080p (30fps) 1280x 720p (30fps) 848x 480p (30fps)
   Choose the setting you prefer.

2. Photo Resolution
   There are seven settings to choose from:
   3M 23681328, 5M 3008×1680, 8M 3776×2128, 10M 4160×2532, 20M 5200×3900, 36M 8000×4504, 38M8048x4736
   Choose the setting you prefer.

3. Infrared Switch
   In dark circumstances, infrared LED will help record better quality video.
   There are two options to select from: Auto / Manual
   Choose the setting you prefer.
   Auto: Infrared LED will be turned on / off automatically according to the environment light condition. When environment light condition is dark, infrared LED will be turned on automatically; When environment light condition is bright, infrared LED will be turned off automatically.
   Manual: Press . to tum on infrared LED, Press again to tum off infrared LED.

4. Video Splitter
   There are four options to select from: 5 Minutes, 10 Minutes, 15 Minutes, 30 Minutes
   Choose the setting you prefer.

5. Voice Prompt
   There are two options to select from: On / Off
   On: Turn on the voice indication prompt.
   Off: Turn off the voice indication prompt.
   Choose the setting you prefer.

6. Auto Power off
   There are four options to select from: 1 Minute / 3 Minutes / 5 Minutes / Off
   Choose the setting you prefer.

7. Loop Recording
   There are two options to select from: On / Off
   On: If memory becomes full, the oldest files will be overwritten by the latest file.
   Off: Camera will stop recording when the memory is full.
   Choose the setting you prefer.

8. LCD Auto Off
   There are four options to select from: 1 Minute / 3 Minutes / 5 Minutes / Off
   LCD Auto Off will turn off LCD display for the selected interval. Please note this will NOT power off the device.
   Choose the setting you prefer.

9. Default Setting
   There are two options to select from: Yes / No
   Yes: Reset all settings to default settings.
   No: Do not reset all settings to default settings.
   Choose the setting you prefer.

10. Password Setting
    Firstly, input the old password, then input the new password. Default password is 000000

11. User ID
    Firstly, input the password, then input the ser ID. Default password is 000000

12. Time Setting
    Firstly, input the password, then input the Date & Time. Default password is 000000

13. Device ID
    Firstly, input the password, then input the device ID. Default password is 000000

14. Language
    There are three options to select from:
    English,
    Choose the language you prefer.

15. Format SD card
    Firstly, input the password, then there will be 2 options to select from: Yes/ No
    Yes: Format the SD card.
    No: Do not format the SD card.
    Default password is 000000

16. Password On/Off
    There are two options to select from: On / Off
    On: Password is required when connect camera to PC to get access to the camera SD card.
    Off: After being connected to PC, camera SD card will be recognized by PC directly.

17. System Message
    The camera information includes: CPU Frequency, User ID, Storage, Device ID, FW Version.

Alarm & Flashing light
Hold for 3 seconds, enables the alarm, and white LEDs start flashing.
Reset
When camera is on, press reset button to make a reset, camera will reboot. It helps when the camera is down.
Charging
Please charge camera via USB cable and wall charger provided. The battery is Polymer Lithium type. When camera is fully charged, blue charging indicator will turn off,
There are 2 ways of charging:

1. Connect camera to computer via USB cable
   Since the current of different computer’s USB port varies from each other, it is normal if there are circumstances that camera can not be fully charged.

2. Charging by adapter & USB cable
   Charged by adapter + USB cable. Camera can work normally, while being charged

Q&A

should not be less than 4 hours.
Data Uploading Interrupted frequently| Front panel of mainframe can’t supply
enough power| Use the USB port of back panel.
Camera can’t be recognized by PC| USB cable issue| Change USB cable.
Wrong driver| Reinstall driver.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>