Leyifeng 2BCN6-D8 Smart Watch User Manual
- June 16, 2024
- Leyifeng
Table of Contents
Smart Watch
Quick Tour
Leyifeng 2BCN6-D8 Smart Watch
Please read the manual carefully before use and keep it properly for future use
Watch management
- Packing list
- Appearance introduction
- Screen operation
- Key operation
- Paired connection
- Charge
- Features
- NFC
Headphone management
Handling and wearing headphones
Paired connection
Gesture control headphones
More guidance
Precautions
Performance parameters
Frequently Asked Questions
After-sales service instructions
Warranty Card
Packing list
Watchhost x1
Charging Cable x 1
watch strap x1
quick guide x 1
Appearance introduction
- wristband
- Function keys Power key
- sensor
- Right earphone
- The left ear of the watch cover hangs
- left earphone
- Headphone compartment
In order to make the measurement more accurate, please wear the watch on your wrist away from the wrist bones and wear it snugly against your skin.But don’t be too tight
Screen operation
Slide down: message notification
Swipe up: Control Center
Swipe right: shortcut function
Swipe left: function menu
Long press: switch dials
Screen-holding: Cover the screen
with your palm
Key operation
- Power on: Press and hold for 3 seconds until the screen lights up
- Power on: Press and hold for 3 seconds until the screen lights up
- Short press to light up the screen
- Double-click the button to enter menu mode
If power on fails after long pressing the power button for 3 seconds, please charge and try again.
Paired connection
Download App
http://www.dhefeng.com/share/watch- share.html?pid=4&vid=54
Scan the QR code to download and install
Download the App: Search in the App Store for |OS system phones “Heylink”,
Android and Hongmeng system phones can be purchased from other application
providers. Search “Heylink” in the store (such as App Store) to download it;
or scan the code to downloadDownload and install
Make a pair
Method one
In the main interface of the watch, swipe up to pop up the control center and
open the watch Bluetooth symbol.
Open the App on your mobile phone, log in or register your account
Click [Device>Add Device>Start Search] in the App
Select the watch Bluetooth D8_WATCH in the search results to complete pairing
Charge
Align the charging cable with the top pin on the bottom case boss until
thecharging indicator appears on the watch screen.
This device is an all-in-one machine. The back shell and battery are not
removable. Please note thatThe following matters:
- Do not open or hit the back case of the device.
- Please do not disassemble, replace or open the battery.
- Equipment and batteries must be disposed of in compliance with local environmental protection laws.
- Charging time: 1-2h.
- Please keep the charging port clean and dry before charging to avoid corrosion of metal contacts and other risks.
Features
-
Dial switch
Press and hold on the home screen for 2 seconds to enter the dial switching interface. slide left or right to switch the watch faces to be selected, click to select set the dial., -
Control panel
Swipe on the home screen to bring up the control panel, functionsOverview: charging status of left and right earphones, Bluetooth, supportPaypal, search for mobile phone, battery, brightness adjustment, mobile phoneFlashlight, Do Not Disturb, NFC. -
Fitness records
Displays the number of steps, distance and calories recorded on the dayAccording to the data, the target can be set in the App. -
Sports
Sports mode options: outdoor walking, outdoor running, indoor walking,Badminton, indoor running, outdoor cycling, indoor cycling, triathlonitems, hiking, elliptical machines and more. Click on the icon to start exercising. -
Breathe
The breathing rhythm can be adjusted according to the animation frequency. -
Heart rate
Turn on scheduled detection on the App, enter this interface, and click TestMeasure a single heart rate value, and each detection data will be displayed in the timetableThe corresponding value is generated on the grid. -
Sleep
This interface displays the sleep monitoring status, and the data is updated every day. Connect to the App to upload and save data simultaneously. -
Blood pressure
When entering the blood pressure measurement interface, the green light at the bottom lights up to start.Measurement, complete the measurement in 30-60 seconds, the measurement at this time is the basicMeasurement based on PPG technology. -
Blood oxygen
When entering the blood pressure measurement interface, the green light at the bottom lights up to start.Measurement, complete the measurement in 30-60 seconds, the measurement at this time is the basicMeasurement based on PPG technology.. -
Side menu
Swipe right on the main interface to bring up the side shortcut menu.Calendar, weather, day of the week, connection instructions, shortcutsmark. -
Map positioning
After the App is successfully connected the currents position. -
Address book
You can add,Delete contact. -
Dial
After using the mobile phone to connect to the Bluetooth call, it can be used normally.Dial function. -
Music
Click the middle button to play or pause mobile music.Can also go to previous/next song. -
Weather
After the watch is connected to the App and location permission is enabled, the weather The interface will display real-time weather temperature and weather type. -
Alarm clock
You can set a single alarm clock and a recurring alarm clock -
Stopwatch
This interface has a stopwatch function and can also set segments Timing. -
Timer
In the timer function, users can quickly start timing through the system’s preset time, or click the custom button to set the time -
Information
Turn on the push of relevant information on the App side, and the watch side can receive the corresponding push information (you need to open thePermissions) -
Looking for mobile phone
When the phone and the App are connected, click to search for the phone. The phone will ring and the watch will display that the search is successful. If the watch is not connected to the App, the watch willThe terminal will prompt that it is not connected. -
Game centre
Provides a variety of games to choose from, -
Calculator
Open the calculator to perform calculations. -
Alipay
Follow the prompts to perform connection binding.Quick payment. -
Calendar
Check calendar dates to plan your time anduse time -
Notification function
Alarm reminder
Set and turn on alarm reminder.
Sedentary reminder
It can be turned on in the App [Settings>
Health Check>Sedentary Reminder]. After turning it on, you can set the start, end time, and do not disturb time.
Incoming call
You can answer or reject the call.
Headphone management
Handling and wearing headphones
Take out the headphones
Place the headphone
Paired connection
After taking out the headset, turn on the Bluetooth of your phone, nd the
headset Bluetooth D8-TWS, and click to connect.
Gesture control headphones
Wear on both ears
Music status: Click the left or right ear to play or pause/triple-click the
voice assistant; double-click the previous song on the left ear/long press to
decrease the volume, double-click the next song on the right ear/long press to
increase the volume.
One ear wear
Music status: Double-click the next song, long-press to increase the
volume, and the other settings are the same as for both ears. Call: single
click to answer/hang up, long press to reject; long press to increase volume
during the call.
Press and hold for 5 seconds to turn on the phone, and it will automatically
pair when it comes out of the warehouse. After connecting once, it will
automatically connect to the phone and turn the sound into headphones when it
comes out of the warehouse.
It will automatically shut down if Bluetooth is not connected for a certain
period of time after leaving the warehouse.
Notes
- Please do not disassemble, repair or retrofit the product without authorization.
- Please do not crash the product with force, or else the product may be damaged.
- Please keep it away from high-intensity magnetic field, direct sun light or high temperature.
- The product shall not be used for diagnosis, treatment and prevention of diseases.
- The waterproof level of this product is non-waterproof and cannot be immersed in water.
- Please do not keep the watchband too tight. Please keep it clean where the watch contacts your skin.
- In order to prevent damage, children should use the product under the guidance of parents.
Performance Parameters
Product name: SMART WATCH
Model: D8
Display screen: 2.01TFT color screen, 240x 296 pixel resolution
Waterproofing grade: Not waterproof
Sensor: triaxial G-sensor
Maximum endurance: 5-7 days
Operating temperature: -10°C~50°C
Battery type: polymer lithium battery
FAQ
Fail to start the watch
- Press the power switch for more than 3s.
- Maybe the battery level is too low. Please charge the battery timely.
The blueteeth is cannot be connected
- Please restart the watch and connect again.
- Please restart the mobile phone blueteeth and connect again.
- Do not connect your mobile phone to other blueteeth device at the same time.
The measurement of heart rate/blood oxygen is inaccurate
- General, it is caused by poor contact between the watch sensor and human body.
- Please ensure that the sensor contacts the wrist well during measurement.
- Please keep your body still and the watch attached to your wrist tightly during measurement.
- For people who have dark skin color and have thick hair on the arm, please open intensified measurement through [device>intensified measurement] on the App.
Sleep data is not accurate enough
- Sleep monitoring simulates the status of natural sleep and getting up of human, and you should wear it as usual.
- If you sleep too late or you do not wear the watch until you go to sleep, there may be some error.
- It does not monitor the sleep data during daytime. The default time for sleep monitoring is from 9:30 in the evening to 12:00 at noon on the next day.
- For more frequently asked questions, please view [My>FAQ] on the App.
After-sale Service
Dear user, thank you for using the product. We are glad to provide the
following after-sales services for you: You can return goods for quality
problems within 7 days after purchasing the product; We can exchange goods for
you for quality problems within 30 days.
During the use of product, return of goods will not be accepted under one of
the following conditions:
- Damages to the product due to falling off during the use.
- Breakdown of product due to disassembly and transformation without authorization.
- Breakdown of product caused by improper service environment which does not accord with the product requirements.
- Damages to the product caused by force majeure (such as fire and earthquake).
Warranty Card
User information
Name:__ Telephone:__
Postcode:__Email:__
Mailingaddress:__
Sales information
Sales unit:__ Telephone:__
invoicenumber:__ Dateofpurchase:__
Salesaddress:__
Product information
Productmame:__ Productmadel:__
FCC Warnning:
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection againstharmful interference in a
residential installation. This equipment generates, uses and can radiateradio
frequency energy and, if not installed and used in accordance with the
instructions, maycause harmful interference to radio communications. However,
there is no guarantee thatinterference will not occur in a particular
installation. If this equipment does cause harmfulinterference to radio or
television reception, which can be determined by turning the equipmentoff and
on, the user is encouraged to try to correct the interference by one or more
of thefollowing measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved
by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1)This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance Ocm between the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>