EZ Dupe M.2NVMe SSD NGFF Duplicator Mini NVMe User Guide
- May 15, 2024
- EZ Dupe
Table of Contents
EZ Dupe M.2NVMe SSD NGFF Duplicator Mini NVMe
Specifications
- LED Indicators: 5
- Support: M.2 NVMe/SATA SSD
- Source Port
- Target Ports
Powering On and Setup
Plugin the power and the machine will boot up automatically. It’s ready to use
when green lights are blinking sequentially.
Source and Target Ports Setup
Insert the SSD with data into the source port. Insert the individual blank
SSD into the target port.
Initiating the Copy Process
Press the Start Button. The machine starts to copy. The green light flashes
during the process. The red light turns on when an SSD fails to be detected.
Completion Confirmation
When each target port green light is steady, it indicates the copy process
has been completed. The red light turns on when an SSD fails to copy.
Additional Information
The Mini NVMe Plus copies valid data sections only and does not need to
copy the whole drive, which can greatly reduce your precious time.
Important Note
DO NOT unplug SSD from the duplicator during the execution process. It
may cause damage to the duplicator system and SSD.
FAQ :
- Q: What should I do if the red light turns on during copying?
A: If the red light turns on, it indicates an issue with SSD detection or copying. Check the connections and try again. If the issue persists, contact customer support for assistance.
Quick Start Guide
Outlook Overview
- Plug in the power and the machine boots up automatically. It’s ready to use when green lights are blinking sequentially.
- Insert the SSD with data into the source port. Insert the individual blank SSD into the target port.
- Press the “Start” Button. The machine starts to copy. The green light flashes during the process. The red light turns on when a SSD fails to be detected.
- When each target port green light is steady indicates the copy process has been completed. The red light turns on when a SSD fails to copy.
The Mini NVMe Plus copies valid data section only, and does not need to copy the whole drive, which can greatly reduce your precious time.
Warning
- DO NOT unplug SSD from the duplicator during the execution process. It may cause damage to the duplicator system and SSD.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>