MAYTONi MAYTONAP3 AutoPro Dual User Manual

MAYTONi MAYTONAP3 AutoPro Dual

Warning
To protect the driving safety of yourself and other road users, and to avoid breaking the traffic law in your respective country; please DO NOT watch videos while driving. Due to the product’s continuous updating, some contents of this manual may differ from the product you actually purchased.

TIPS! To adapt to the factory display, the Android system will automatically restart once when the first time connecting to the car.

Getting to know before using

This AI box is designed for the factory car stereo with built-in wired Apple CarPlay, which can convert wired CarPlay into a full Android system. Besides, it integrates wireless Apple CarPlay/Android Auto functions.

How to check a car has CarPlay or not

1. Plug an iPhone (running iOS 10 or newer) into the car USB ports with a genuine factory lightning cable. If there is a notification pop-up on your iPhone like below, your car has built-in Apple CarPlay.
2. If there is a CarPlay icon in the car stereo menu, that your car has built-in Apple CarPlay.
3. Contact your car dealer for help.

What’s in the box

• Android AI box *1
• Bypass power cable *1
• USB cable (type-C to A) *1
• USB cable (type-C to C) *1
• User manual *1
• Installation guide *1
• Ejection pin *1

Specifications

• OS
  

  • Android 10

• Processor
  

  • Qualcomm Snapdragon 665 Octa-core, 64 bit 11 nm, up to 2.0 GHz

• RAM+ROM
  

  • 4GB + 64GB

• Expandable Memory
  

  • Micro SD card, up to 128GB

• SIM Card
  

  • 3G/4G LTE Nano SIM card

• Wi-Fi
  

  • Dual-band Wi-Fi 802.11 a/b/g/n/ac 2.4 GHz+5 GHz

• Bluetooth
  

  • BT 5.0, for iPhone/Android smartphone hands-free calling & audio streaming, external BT mouse, remote controller, etc.

• GNSS
  

  • Built-in GPS/GLONASS/Beidou

• Power Input
  

  • USB 5V~1A

• Operating Temperature
  

  • -30~75°C

• Dimensions
  

  • 787832mm

• Weight

  • 86g

Connectors

NOTE! Power off before inserting or removing the nano SIM card. Nano SIM card and Micro SD card are not included in the package. For how to insert the cards please refer to this diagram.

User Interface

Quick settings

• Pairing your iPhone/Android phone with Bluetooth

Setting up wireless Apple CarPlay/Android Auto

TIPS! Disable [wireless auto connect] in MultiPlay app settings if you don’t want to automatically start wireless CP/AA every time you pair to Bluetooth.

Opening notification bar

Casting different contents to HDMI monitor

Enable split-screen mode

Setting nav bar to the right side

Software version

• Go to Settings > About machine > Build number

Firmware update

FCC

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance 20cm between the radiator& your body.

IMPORTANT NOTE

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used following the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Google, Google Play, Android, and Android Auto, are trademarks of Google Inc., registered in the U.S. and other countries. Apple, iPhone, iPad, and CarPlay are trademarks of Apple Inc., registered in the U.S. and other countries. We are not affiliated with Google Inc. or Apple Inc. All other product and service names mentioned are the trademarks of their respective companies.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>