TOPICON MDT665 Tablet User Manual

June 16, 2024
TOPICON

TOPICON MDT665 Tablet

The MDT665 is for the outdoor area designed. It’s a rugged smartphone, especially apps to use in the outdoor area. You can use it as a tool. Look to your tasks even under demanding to do outdoor conditions. It is waterproof, dustproof and shockproof.

  • The device can be used for up to 30 minutes in 1.5 m deep lying water.
  • You can do it in dirty and dusty environments.
  • Ambient temperatures are from -20℃ to 25℃ (via USB-C port) or 40℃ (via with charging base).
  • The impact resistance was with a drop height of 1.5 m tested.

Although the MDT665 is the IP 68 standard and tested for ruggedness no heavy objects were thrown on the display or filed. It should not be thrown be squeezed or bent. It can be usedfor Underwater photos, but the specified depth should not be exceeded. Hold it off fire stoves and areas with higher than remote temperatures. Charge the battery please not longer than 24 hours.

Technical Manual

Device overview graph

  1. Power button
  2. Volume key +/-
  3. Custom button
  4. SIM and TF card slots
  5. Front camera
  6. Earphone
  7. Rear camera
  8. Speaker
  9. Docking interface
  10. ypeC USB port
  11. Microphone
  12. NFC Antenna

Charging with cradle

There are RS232 interfaces and OTG from the cradle.

TOPICON-MDT665-Tablet-fig-2

Installation

TOPICON-MDT665-Tablet-fig-5TOPICON-MDT665-Tablet-
fig-6 TOPICON-MDT665-Tablet-fig-7 TOPICON-MDT665
-Tablet-fig-8

Topicon HK Limited
2314-2316, Tower C, Huangdu Plaza, Yitian Road, Futian District, Shenzhen 518048, China

Technical Specifications

TOPICON-MDT665-Tablet-fig-9

RF Transmitters Technical information

Model No: MDT665

Technical Characteristics of EUT
2G
Support Networks:| GSM, GPRS, EDGE
Support Bands:| GSM900, DCS1800
Frequency Range:| GSM900: Tx: 880-915MHz, Rx: 925-960MHz
DCS1800: Tx: 1710-1785MHz, Rx: 1805-1880MHz
RF Output Power:| GSM900: 33.50dBm, GSM1800: 31.01dBm

EDGE900: 26.93dBm, EDGE1800: 26.52dBm

Modulation Type:| GMSK, 8PSK
Type of Antenna:| FPC Antenna
Antenna Gain:| GSM900: -0.8dBi, DCS1800:0.5dBi
GPRS/EDGE Class:| Class 12
3G
Support Networks:| WCDMA, HSDPA, HSUPA
Support Bands:| WCDMA Band 1, WCDMA Band 8
Frequency Range:| WCDMA Band 1: Tx: 1920-1980MHz, Rx: 2110-2170MHz
WCDMA Band 8: Tx: 880-915MHz, Rx: 925-960MHz
RF Output Power:| WCDMA Band 1: 23.22dBm, WCDMA Band 8: 23.49dBm
Modulation Type:| BPSK, QPSK, 16QAM
Antenna Type:| FPC Antenna
Antenna Gain:| WCDMA Band 1: -0.8dBi, WCDMA Band 8: 0.6dBi
4G
Support Bands:| FDD-LTE Band1, 3, 7, 8, 20, 28, TDD-LTE Band 38, 40




Frequency Range:

| FDD-LTE Band 1: Tx: 1920-1980MHz, Rx: 2110-2170MHz
FDD-LTE Band 3: Tx: 1710-1785MHz, Rx: 1805-1880MHz
FDD-LTE Band 7: Tx: 2500-2570MHz, Rx: 2620-2690MHz
FDD-LTE Band 8: Tx: 880-915MHz, Rx: 925-960MHz
FDD-LTE Band 20: Tx: 832-862MHz, Rx: 791-821MHz
FDD-LTE Band 28: Tx: 807-824MHz, Rx: 758-803MHz
TDD-LTE Band 38: Tx: 2570-2620MHz, Rx: 2570-2620MHz
TDD-LTE Band 40: Tx: 2300-2400MHz, Rx: 2300-2400MHz


Max.RF Output Power:

| FDD-LTE Band 1: 23.18dBm, FDD-LTE Band 3: 24.07dBm, FDD-LTE Band 7: 23.27dBm, FDD-LTE Band 8: 23.17dBm, FDD-LTE Band 20: 23.21dBm, FDD-LTE Band 28: 23.21dBm,

TDD-LTE Band 38: 23.39dBm, TDD-LTE Band 40: 23.33dBm

Modulation Type:| QPSK, 16QAM
Antenna Type:| FPC Antenna


Antenna Gain:

| FDD-LTE Band 1: 0.6dBi, FDD-LTE Band 3: 0.5dBi, FDD-LTE Band 7: 0.9dBi, FDD- LTE Band 8:-0.8dBi, FDD-LTE Band 20: -1.3dBi, FDD-LTE Band 28: -1.3dBi,

TDD-LTE Band 38:0.9dBi, TDD-LTE Band 40: 1.2dBi,

Bluetooth

Bluetooth Version:| Bluetooth V5.0
Frequency Range:| 2402-2480MHz
Max.RF Output Power:| 9.33dBm (EIRP)
Type of Modulation:| GFSK, π/4 DQPSK, 8DPSK
Data Rate:| 1Mbps, 2Mbps, 3Mbps
Quantity of Channels| 79/40
Channel Separation:| 1MHz/2MHz
Type of Antenna:| FPC Antenna
Antenna Gain:| 1.3dBi
Wi-Fi (2.4GHz)
Support Standards:| 802.11b, 802.11g, 802.11n-HT20/40
Frequency Range:| 2412-2472MHz for 802.11b/g/n(HT20)

2422-2462MHz for 802.11n(HT40)

Max.RF Output Power:| 15.60dBm (EIRP)
Type of Modulation:| CCK, OFDM, QPSK, BPSK, 16QAM, 64QAM
Quantity of Channels| 13 for 802.11b/g/n(HT20), 9 for 802.11n(HT40)
Channel Separation:| 5MHz
Type of Antenna:| FPC Antenna
Antenna Gain:| 1.3dBi
NFC
Frequency Range:| 13.56MHz
Radiated H-Field:| 13.34dBuA/m(@3m)
Modulation:| ASK
Type of Antenna:| FPC Antenna
Antenna Gain:| 0dBi
Transmitter Product Class| 1
GPS
Frequency Range:| 1575.42MHz Receiving

RF Exposure Information

RF Exposure Information (SAR)This device complies with Specific Absorption Rate (SAR) limits for general population/uncontrolled exposure (Localized 10-gram SAR for head and trunk, limit: 2.0W/kg) specified in Council Recommendation 1999/519/EC, ICNIRP Guidelines, and RED (Directive 2014/53/ EU). During SAR testing, this device was set to transmit at its highest certified power level in all tested frequency bands and placed in positions that simulate RF exposure during use against the head with no separation and near the body with a separation of 10 mm. SAR compliance for body operation is based on a separation distance of 10 mm between the unit and the human body. This device should be carried at least 10 mm away from the body to ensure RF exposure level is compliant or lower than the reported level. When attaching the device near the body, a belt clip or holster should be used that does not contain metallic components and allows a separation of at least 10 mm to be maintained between the device and the body   The above power, frequency, and distance are only applicable to EU.

RF Exposure Statement
For body-worn operation, this device has been tested and meets the IC RF exposure guidelines when used with an accessory designated for this product or when used with an accessory that contains no metal and that positions the handset a minimum of 1.0 cm from the body. Noncompliance with the above restrictions may result in a violation of RF exposure guidelines.

IC WARNING
This device contains license-exempt transmitter(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:

  1. This device may not cause interference.
  2. This device must accept any interference, including interference that may cause undesired operation of the device.

FCC Radiation Exposure Statement:
This device meets the government’s requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. The SAR limit of USA (FCC) is 1.6 W/kg averaged. Device types: Tablet (FCC ID: 2AHAF-MDT665) has also been tested against this SAR limit. SAR information on this and other pad can be viewed online at http://www.fcc.gov/oet/ea/fccid/. Please use the device FCC ID number for search. This device was tested simulation typical 10mm to body. To maintain compliance with FCC RF exposure requirements, use accessories should maintain a separation distance between the user’s bodies mentioned above, use accessories should not contain metallic components in its assembly, the use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided.

FCC Warning

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used per the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur ina particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Accessories

TOPICON-MDT665-Tablet-fig-10

Certification

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals